DummyTanong
Forum Guru
eto popatingin yung output nito
baka iba yung firmware location
Code:cat /proc/mtd
eto popatingin yung output nito
baka iba yung firmware location
Code:cat /proc/mtd
iba pala yung sayo kaya pala
ano kaya pwde gawin pra ma flash sir?
kaylangan iremap yung flash ng dtsano kaya pwde gawin pra ma flash sir?
Pano yun iremap ndi ko na alamkaylangan iremap yung flash ng dts

Pano yun iremap ndi ko na alam
v4.2 2.2 pa po etong akin pldt
yung sa first page ba?na try ko na din yun ganon pa din.[Hidden content]
yung sa first page ba?na try ko na din yun ganon pa din.
ok po try po thanks[Hidden content]
then try mo iboot yung kernel
enter ko lng yang cmd sa putty tass flash ko na ulit yung kernel nyo po?[Hidden content]
ok po try po thanks
enter ko lng yang cmd sa putty tass flash ko na ulit yung kernel nyo po?
ok po try ko ulit[Hidden content]
sinubukan ko ulit iflash yung ky ts ganon pa din pldt pa din...pano kaya gawin pra maging openwrt?Nsa mtd4 ata yung syo sir kaya pldt parin
hindi ko pa nasubukan thru mtd write baka masiraKung ayaw sa tftpd bka pwde tru mtd write command...

Antayin ntin si sir 1mpact2 bka may ibng way pa...hindi ko pa nasubukan thru mtd write baka masira![]()
sure na masisira yan pag nag mtd writehindi ko pa nasubukan thru mtd write baka masira![]()
kunin mo muna yung log ng /dev/log_radio na galing sa stock firmware1MPACT2 Sir na install ko na openwrt sa R281 ko kaso walang internet di din maaccess yung modem info loading lang lagi gamit ko pala firmware nyo po.
View attachment 2525178
View attachment 2525180
View attachment 2525181
View attachment 2525183
View attachment 2525185
View attachment 2525186
yang sa modem na tab loading lang lagi pano po kaya ma fix to?
eto pala lsystem log nya lagi may error lumalabas AT CMD pano kaya ma fix yung internet neto?
View attachment 2525243
View attachment 2525245
balik mo muna sa stock firmware yan
login ka sa ssh
tapos mag lagay ka ng ganitong command sa /etc/rc.local
View attachment 2510215Code:cat /dev/log_radio|grep "\[RIL1\|\[rild\|AT cmd">/tmp/rild
after niyan power off then power on
eh unplug dapat hindi reboot ha
login ka ulit sa ssh
eh run mo naman itong command
hanapin mo yung AT+CHECKATVALID=*Code:cat /tmp/rild|head -n 150
at kunin mo yan.
View attachment 2510217
flash ka ulit nung openwrt na firmware
at edit mo naman yung /etc/gcom/ncm.json
hanaping mo yung part na notion
replace mo yung number nung sa CHECKATVALID=*
View attachment 2510220
lagay mo yung nakuha mo kanina
after nyan reboot mo yung wifi
binalik ko sa stock ffirmware kaso ndi ko na maacces 192.168.1.1 yung lumalabas na ip 169.254.259.237 na pano kaya to?kunin mo muna yung log ng /dev/log_radio na galing sa stock firmware