👨‍🏫 Tutorial R281 Modified Custom Dashboard Web UI Orbit PR0 Lock Band & Lock Cell ID with USSD

[Xpmove12]

A ok po.meron na din po ba yan yung signal monitor?

wala pala, Lods kung orbit dashboard

Yung Optus v1 at v2 ang meron
Pero naka design lang sa V52

 

[malows08]

wala pala, Lods kung orbit dashboard

Yung Optus v1 at v2 ang meron
Pero naka design lang sa V52

A noted po.thank po sa info

 

[Xpmove12]

A noted po.thank po sa info

Pwede rin sa v53, Lods kaya lang pangit daw v53 basta sa Optus

Pasalamat tau sa creator na si Alex ng R281 Optus ui Dashboard

About po dun sa tutorial po, yong dapat daw po bukas ang OTA? Hindi ako alam paano yon ma check. aaminin ko di ako magaling sa ganito. pero kung may susundan naman po kaya naman. , Help na lang po.
If : after ko ma gawa yan po tutorial na yan, ano po next dapat, baka mag update again to smartbro r281 ko.

kapag nagawa na downgrade, Lods
I apply mo yung firmware amee rus or kay Jhowel Huerto, naka permanent block fota updates na mga yun

Dalawa tricks ung pag flush 1st trick dapat na open telnet/ssh para makapag flush via mtd commands

2nd trick ung unbricking methods ni Lodi Jerome Laliag/Jhowel Huerto sa pag flash via usb mode tftpd

From Ameee Rus r281 v52 firmware
You do not have permission to view the full content of this post. Log in or register now.

 

[Mackits]

Pwede rin sa v53, Lods kaya lang pangit daw v53 basta sa Optus

Pasalamat tau sa creator na si Alex ng R281 Optus ui Dashboard



kapag nagawa na downgrade, Lods
I apply mo yung firmware amee rus or kay Jhowel Huerto, naka permanent block fota updates na mga yun

Dalawa tricks ung pag flush 1st trick dapat na open telnet/ssh para makapag flush via mtd commands

2nd trick ung unbricking methods ni Lodi Jerome Laliag/Jhowel Huerto sa pag flash via usb mode tftpd

From Ameee Rus r281 v52 firmware
You do not have permission to view the full content of this post. Log in or register now.

ang magagawa ko po downgrade via phone, sira po laptop ko kase.
Mamaya ko try po tuts mo saken. wala pa po time. Salamat po.

 

[renzkiedaren]

May signal bar po ba ang outpus v2?

 

[minrbn]

Goods na goods bossing ganda yan

Question lang. If rver gajto gamitin ko e hibdi na ba mag aauti switch ng band? Kusa kasi bunabalik sa band 1 after ilang mins.

 

[Xpmove12]

Goods na goods bossing ganda yan

Question lang. If rver gajto gamitin ko e hibdi na ba mag aauti switch ng band? Kusa kasi bunabalik sa band 1 after ilang mins.

Depende pa rin sa area, Lods
Pero mas stable kung gawin mo ung Antenna mods sa R281, ung direct sa module na Antenna mods, paki backread mo page 1 to 2 para ma seen mo ung images

Working naman ung Orbit Dashboard Ui, pero mas maganda ung R281 Optus V1 at V2, Este wala pala Signal Bars infos , pero may buit in changed imei via At commands shell, bandlock , cell id lock

Halos same lang sa Orbit Dashboard, kulang lang Signal Bars kung sa dito Orbit dashboard

 

[Asuka Langley Soryu]

Depende pa rin sa area, Lods
Pero mas stable kung gawin mo ung Antenna mods sa R281, ung direct sa module na Antenna mods, paki backread mo page 1 to 2 para ma seen mo ung images

Working naman ung Orbit Dashboard Ui, pero mas maganda ung R281 Optus V1 at V2, kumpleto kac Signal Bars, buit in changed imei, bandlock , cell id lock

Halos same lang sa Orbit Dashboard, kulang lang Signal Bars kung sa dito Orbit dashboard

Ano po command line para mag force External antenna?

 

[Xpmove12]

Ano po command line para mag force External antenna?

dapat open na telnet/ssh, Lods
Paki backread page 1 to 2

 

[BL4CKZ0UL]

natry ko to dati lods sa indo na youtube, kaso na wala info sa dashboard,
ngayon natry ko ulit tong sayo ano pala default pass hindi ko kasi ma login.

edit: admin admin yung pass same din pala walang info sa dashboard.

 

[Xpmove12]

natry ko to dati lods sa indo na YøùTùbé, kaso na wala info sa dashboard,
ngayon natry ko ulit tong sayo ano pala default pass hindi ko kasi ma login.

edit: admin admin yung pass same din pala walang info sa dashboard.

Ano Firmware version gamit mo r281, Lods

Sensya Lods, wala pala Signal bar infos mga Optus dashboard Ui, Pero maganda kga backhrouds, may ussd, At console, para madali magpalit imei sa production mode

Yung Optus V2 nalang try mo, Lods
Complete na infos nyan Pang Firmware v52 or v53 working


SMARTBRO R281 Optus V2 5.2 and 5.3 WEBUI moded smooth theme
ito share ko na...

open Putty SSH at Winscp

Upload file to winscp, tmp folder

then punta sa Open SSH
copy and paste this code

sysupgrade -r /tmp/www_moded.tgz

ito yung file....download & extract zipfile no pass
You do not have permission to view the full content of this post. Log in or register now.

"""mawawala kapag nagreset..."""

username:smartbro
password:Smartbro@1234

or ang inyung user and pass...

next version3View attachment 2033954

Iba pa rin ung mga binebenta na firmware gaya dunsa Notion V1/V2, easy changed imei at meron ding Signal bars infos

 

[PHC-TANUX]

SMARTBRO R281 Optus V2 5.2 and 5.3 WEBUI moded smooth theme
ito share ko na...

open Putty SSH at Winscp

Upload file to winscp, tmp folder

then punta sa Open SSH
copy and paste this code

sysupgrade -r /tmp/www_moded.tgz

ito yung file....download & extract zipfile no pass
You do not have permission to view the full content of this post. Log in or register now.

"""mawawala kapag nagreset..."""

username:smartbro
password:Smartbro@1234

or ang inyung user and pass...

next version3View attachment 2033954

for smartbro r281 lang po ba to? or pwede po sa pldt r281?

 

[alex1212]

for smartbro r281 lang po ba to? or pwede po sa pldt r281?

pwede lods basta ma flash mo ng v5.2 webui....ng pldt mo...

optus version 3...lavender webui theme

flash mo muna ang r281 mo ng firmware bin v5.2 bago mo gawin ito..

 

[BL4CKZ0UL]

Ano Firmware version gamit mo r281, Lods

Sensya Lods, wala pala Signal bar infos mga Optus dashboard Ui, Pero maganda kga backhrouds, may ussd, At console, para madali magpalit imei sa production mode

Yung Optus V2 nalang try mo, Lods
Complete na infos nyan Pang Firmware v52 or v53 working


SMARTBRO R281 Optus V2 5.2 and 5.3 WEBUI moded smooth theme
ito share ko na...

open Putty SSH at Winscp

Upload file to winscp, tmp folder

then punta sa Open SSH
copy and paste this code

sysupgrade -r /tmp/www_moded.tgz

ito yung file....download & extract zipfile no pass
You do not have permission to view the full content of this post. Log in or register now.

"""mawawala kapag nagreset..."""

username:smartbro
password:Smartbro@1234

or ang inyung user and pass...

next version3View attachment 2033954

Iba pa rin ung mga binebenta na firmware gaya dunsa Notion V1/V2, easy changed imei at meron ding Signal bars infos

yung Orbit Pro tinry ko lods from sw 4.2 to Orbit pro not visible yung dashboard niya. or need ko muna mag lagay ng 5.2 para ma e apply ang orbit pro? e try ko tong bagong bigay mo salamats!

 

[Xpmove12]

yung Orbit Pro tinry ko lods from sw 4.2 to Orbit pro not visible yung dashboard niya. or need ko muna mag lagay ng 5.2 para ma e apply ang orbit pro? e try ko tong bagong bigay mo salamats!

May backup ka pa v42 firmware, Lods

Pwede pa shared kung unli reset with bandlock plus cell id

Yung mtd4.bin

 

[Xpmove12]

pwede lods basta ma flash mo ng v5.2 webui....ng pldt mo...

optus version 3...lavender webui theme

flash mo muna ang r281 mo ng firmware bin v5.2 bago mo gawin ito..


View attachment 2037879 View attachment 2037880

Ayos Lodi, ganda Optus V3 i mixed mo na rin Signal Bars un hanap karamihan, then Create new thread ka dito sa Phc, para malaman karamihan obra maestro mo

Maporma din ung madagdag signal Bar infos, ung ginawa Lodi Unel sa R051

Na nilipat sa r281 ng mga sellers

Dito nanggaling signal bars info ng mga R281 from r051 dashboard tgz files From Lodi Unel

R051 Dashboard file with Signal bar infos
Tutorial - PLDT R051 | Easy Band Locking (FREE)

 

[BL4CKZ0UL]

May backup ka pa v42 firmware, Lods

Pwede pa shared kung unli reset with bandlock plus cell id

Yung mtd4.bin

ito gamit ko lods kay sir amee base on 4.2 ni sir 1MP4CT2
working din cell id locking niya.

R281 4.2 Stable Firmware

 

[Xpmove12]

ito gamit ko lods kay sir amee base on 4.2 ni sir 1MP4CT2
working din cell id locking niya.

R281 4.2 Stable Firmware

Permanent Block Fota updates, Unli reset ba yan, Salamat

Ano baseband nyan, Lods Firmware v42 baseband 20 yata ung galing kay Lodi Impact2
Baseband 22 gamit yung iba

God BLESS sa pagbahagi

Ano po command line para mag force External antenna?

Kahit hayaan na pala inTernal antenna Nalabas, Lods kac malakas naman sa speedtest kapag naka Antenna mods na naka direct sa module R281, wag na pansinin un kac mas mababa ms ping ung naka internal stats R281 Antenna port modifications

 

[malows08]

Good day po,ano pong webui ang may signal bars.thanks

 

[alex1212]

Sa r281, Lods

Wala pa free remote ka kina Ameee_Rus, Lucas Liam(Marukoy), Jhowell/Jerome

R051 lang ung meron na free Dashboard with Signal Bars sa Yt Channel Jhowel

yung mga naremote ng mga master dito n may sinal bar...pwede nila hugutin yung "www folder"
ang code na pinost mo dito...

# backup your webui to /root/www_backup.tgz
tar -cvzf /root/www_backup.tgz /www

sana may mag share dito para malagay natin sa folder yung signal bars...