Boosteven R281 (OpenWrt Build)

[L E N A R]

R281 OpenWrt Build

You do not have permission to view the full content of this post. Log in or register now.

 

[malows08]

Gudpm po paano po process neto?pwede po using cp?

 

[-Synntaxx]

Salamat po. ano po process nito?

 

[bjarnco32]

L E N A R Have you tested your build with PLDT_CP_R281_V002 LTE firmware?

 

[L E N A R]

L E N A R Have you tested your build with PLDT_CP_R281_V002 LTE firmware?

hindi ko na try wala kasi akong ganyang version hirap din kasi mag downgrade ng CP version

 

[-Synntaxx]

hindi ko na try wala kasi akong ganyang version hirap din kasi mag downgrade ng CP version

kailangan po ba nito ng usb ttl? hehehe

 

[bjarnco32]

hindi ko na try wala kasi akong ganyang version hirap din kasi mag downgrade ng CP version

The 'at+checkatvalid' line of the ncm.json in the initialize section might fail on V002 firmware versions because the checkatvalid is not yet implemented in this version. This might cause the ncm script to not successfully initialize and bring up the mobile network.

Another issue in V002 is that zcainfo does not show sensible values for the secondary band when operating under CA, only for the primary band.

 

[AVICII]

Wow lakas mo naman boss, salamat neto, itong akin boss rekta naba sysupgrade or flash ko ulit yung kernel

The 'at+checkatvalid' line of the ncm.json in the initialize section might fail on V002 firmware versions because the checkatvalid is not yet implemented in this version. This might cause the ncm script to not successfully initialize and bring up the mobile network.

Another issue in V002 is that zcainfo does not show sensible values for the secondary band when operating under CA, only for the primary band.

bjarnco32 Iabas muna din openwrt ne fx-id3 boss hehe,

 

[iannejay27]

walang pang R291 TS?

 

[MICCHA ELA]

ano ba pros nito? or benefits po?? pa sagot naman sa mga masters natin jan salamat po.

 

[-Synntaxx]

up po para sa process

 

[jhowelgraciomodems]

The 'at+checkatvalid' line of the ncm.json in the initialize section might fail on V002 firmware versions because the checkatvalid is not yet implemented in this version. This might cause the ncm script to not successfully initialize and bring up the mobile network.

Another issue in V002 is that zcainfo does not show sensible values for the secondary band when operating under CA, only for the primary band.

bro pwede ba to sa R291?

 

[Chann83]

Tanung po mga lods, pwede naba gumamit ng built in modem vpn kapg open wrt build ng r281? Pwede na magload ng .json file?

 

[deathnote21]

helo boss pwede ko po ba ito i flash sa R01 ng globe

 

[AVICII]

Tanung po mga lods, pwede naba gumamit ng built in modem vpn kapg open wrt build ng r281? Pwede na magload ng .json file?

pwede

 

[malows08]

Sana maglabas ng tutorial kung paano gawin thanks

 

[bjarnco32]

bro pwede ba to sa R291?

Pwede kung maload via tftp. Pero magka issue lang yan sa wi-fi LED.

 

[L E N A R]

Sana maglabas ng tutorial kung paano gawin thanks

di ko na kasalanan kung masira WIFI mo..
hindi rin kasi gagana yang firmware kung hindi mo pa na kukuha yung AT+CHECKATVALID=

 

[-Synntaxx]

di ko na kasalanan kung masira WIFI mo..
hindi rin kasi gagana yang firmware kung hindi mo pa na kukuha yung AT+CHECKATVALID=

need po ba ng usb ttl? hehehe

 

[L E N A R]

need po ba ng usb ttl? hehehe

ethernet cable lang gamit ko dyan
para ka lang mag rerecover ng firmware