PLDT Boosteven R281 (Band Locking)

[H4wk3ye]

mga master pa off ulet...subukan ko sana mag band locking sa R051 ko gamit ssh app...baka may magshare po ng command po like dito sa pic. para copy/paste ko nalang po..maraming salamat po in advance

Command Syntax
<mode> : 0 - Cell/Frequency disabled, 1 - Frequency lock enabled, 2 - Cell lock enabled
<act> 0 - GSM, 1 - UMTS_TD, 2 - UMTS_WB, 3-LTE
<band> - selected Band
<freq> - selected EARCN
<cellid> - selected PCI

Frequency Lock Command Samples:
Band 3
ubus call cm set_cell_lock '{"mode":"1","act":"3","band":"3","freq":"1775","cellid":"0"}'

 

[H4wk3ye]

mga master pa off ulet...subukan ko sana mag band locking sa R051 ko gamit ssh app...baka may magshare po ng command po like dito sa pic. para copy/paste ko nalang po..maraming salamat po in advance

Command Syntax
<mode> : 0 - Cell/Frequency disabled, 1 - Frequency lock enabled, 2 - Cell lock enabled
<act> 0 - GSM, 1 - UMTS_TD, 2 - UMTS_WB, 3-LTE
<band> - selected Band
<freq> - selected EARCN
<cellid> - selected PCI

Frequency Lock Command Samples:

Band 3
ubus call cm set_cell_lock '{"mode":"1","act":"3","band":"3","freq":"1775","cellid":"0"}'

 

[Am-Am]

Command Syntax
<mode> : 0 - Cell/Frequency disabled, 1 - Frequency lock enabled, 2 - Cell lock enabled
<act> 0 - GSM, 1 - UMTS_TD, 2 - UMTS_WB, 3-LTE
<band> - selected Band
<freq> - selected EARCN
<cellid> - selected PCI

Frequency Lock Command Samples:

Band 3
ubus call cm set_cell_lock '{"mode":"1","act":"3","band":"3","freq":"1775","cellid":"0"}'

yown..salamat lods...ikaw din yata.may gawa nyang tutorial sa yt?

 

[Am-Am]

lods haweye..paano pala malalaman dito mga band?..sensya na newbie pako dito...yan nasasagap ng R051 ko

 

[H4wk3ye]

lods haweye..paano pala malalaman dito mga band?..sensya na newbie pako dito...yan nasasagap ng R051 ko

SMART LTE BAND LIST and FREQ LIST B1 U/D:1935MHz/2125MHz (FDD) EARFCN: 150 B3 U/D:1725MHz/1820MHz (FDD) EARFCN: 1350 B3 U/D:1765MHz/1860MHz (FDD) EARFCN: 1750 B3 U/D:1767.5MHz/1862.5MHz (FDD) EARFCN: 1775 B5 U/D:830MHz/875MHz (FDD) EARFCN: 2460 B5 U/D:832.5MHz/877.5MHz (FDD) EARFCN: 2485 B28 U/D:730.5MHz/785.5MHz (FDD) EARFCN: 9485 B40 U/D:2307.5MHz/2307.5MHz (TDD) EARFCN: 38725 B40 U/D:2327.7MHz/2327.7MHz (TDD) EARFCN: 38927 B40 U/D:2347.5MHz/2347.5MHz (TDD) EARFCN: 39125 B40 U/D:2367.3MHz/2367.3MHz (TDD) EARFCN: 39323 B41 U/D:2587.2MHz/2587.2MHz (TDD) EARFCN: 40562 B41 U/D:2607MHz/2607MHz (TDD) EARFCN: 40760 B41 U/D:2640MHz/2640MHz (TDD) EARFCN: 41090

 

[Am-Am]

lods haweye..paano pala malalaman dito mga band?..sensya na newbie pako dito

SMART LTE BAND LIST and FREQ LIST B1 U/D:1935MHz/2125MHz (FDD) EARFCN: 150 B3 U/D:1725MHz/1820MHz (FDD) EARFCN: 1350 B3 U/D:1765MHz/1860MHz (FDD) EARFCN: 1750 B3 U/D:1767.5MHz/1862.5MHz (FDD) EARFCN: 1775 B5 U/D:830MHz/875MHz (FDD) EARFCN: 2460 B5 U/D:832.5MHz/877.5MHz (FDD) EARFCN: 2485 B28 U/D:730.5MHz/785.5MHz (FDD) EARFCN: 9485 B40 U/D:2307.5MHz/2307.5MHz (TDD) EARFCN: 38725 B40 U/D:2327.7MHz/2327.7MHz (TDD) EARFCN: 38927 B40 U/D:2347.5MHz/2347.5MHz (TDD) EARFCN: 39125 B40 U/D:2367.3MHz/2367.3MHz (TDD) EARFCN: 39323 B41 U/D:2587.2MHz/2587.2MHz (TDD) EARFCN: 40562 B41 U/D:2607MHz/2607MHz (TDD) EARFCN: 40760 B41 U/D:2640MHz/2640MHz (TDD) EARFCN: 41090

yown..maraming maraming salamat sir

 

[H4wk3ye]

Guyz to makes sure you are only getting 4G+ connection just run this command AT+WS46=28 and make sure to you have this set up.

 

[kulapow10101]

ito pala dapat yung command..

ubus call router set_dropbear_info '{"dropbear_mode":"1","dropbear_key_type":"0"}'

Lods, sa termux po ba ito irurun? Panop po iinstall si openwrt?

 

[L E N A R]

Lods, sa termux po ba ito irurun? Panop po iinstall si openwrt?

sa termux po yan irurun after mung ma-enable ang telnet..

 

[Am-Am]

nakailang palit nako ng band sa R051..mahina padin ...mukang nakakapagsisi na bumili agad ako ng R051 ahh ..hindi kasi ako nakapagsearch agad na single band lang pala to .....maremidiohan pa kaya ito ng external antenna?..sa palagay nyo mga master?

 

[L E N A R]

H4wk3ye kaya kayang maka-receive ng band 7 & 42 ito..

 

[Toa]

View attachment 1618412
H4wk3ye kaya kayang maka-receive ng band 7 & 42 ito..

if naka enable default baka kaya. yung band 42 nga lang high freq di nasasagap ng built in antenna pati ng globe mimo ko. wala din CA. need ng wide band antenna yung mga compatible sa 5g frequency

 

[H4wk3ye]

View attachment 1618412
H4wk3ye kaya kayang maka-receive ng band 7 & 42 ito..

Try natin enable NG-RAN and E-UTRAN kasi ng try ako ayaw eh Master LENAR.

 

[kulapow10101]

ito pala dapat yung command..

ubus call router set_dropbear_info '{"dropbear_mode":"1","dropbear_key_type":"0"}'

Tulong lods, tinry ko to sa Virtual box using Openwrt OS. Error sya.

 

[kulapow10101]

View attachment 1618412
H4wk3ye kaya kayang maka-receive ng band 7 & 42 ito..

May tutorial kaba sir pano enable ang telnet? Inadd ko na sya sa Firewall Services ng R281 ko. Pero denied padin.

 

[oblivion85]

Master Lenar, may command ba for ZNLOCKBAND through ubus call sa terminal? Thanks.

 

[H4wk3ye]

View attachment 1618412
H4wk3ye kaya kayang maka-receive ng band 7 & 42 ito..

Guyz subukan niyo naman Band 7 sa inyo. Para malaman natin nag try ako wala ako nakukuhang signal baka sa area ko lang talaga. Sa mga may 5G device diyan phone or modem try niyo naman Band 7 mga Master

 

[Toa]

Guyz subukan niyo naman Band 7 sa inyo. Para malaman natin nag try ako wala ako nakukuhang signal baka sa area ko lang talaga.

View attachment 1618519View attachment 1618521View attachment 1618522View attachment 1618523

wala din sakin sa built in tsaka globe mimo. sa phone din wala band 7 eh kaya baka walang binabato talaga pero mahirap din makasagap ng band 7 outdoor band talaga yan

 

[L E N A R]

Master Lenar, may command ba for ZNLOCKBAND through ubus call sa terminal? Thanks.

ito ubus command

ubus call version set_atcmd_info '{"atcmd":"AT+ZNLOCKBAND=1,0,5,0"}'

 

[oblivion85]

ito ubus command

ubus call version set_atcmd_info '{"atcmd":"AT+ZNLOCKBAND=1,0,5,0"}'

Thanks boss.