PLDT Boosteven R281 (Band Locking)

[L E N A R]

pano idisable telnet paps? open na din port 22 ko
View attachment 1613946

ito ang pang disable ng TELNET

ubus call wireless wifi_ate_disabled

 

[zmike182]

panu pa to mga master? 3/28 lng kasi malakas pero mayat maya nag 3/xx po any solution?

boss L E N A R baka naman po or boss H4wk3ye

 

[L E N A R]

panu pa to mga master? 3/28 lng kasi malakas pero mayat maya nag 3/xx po any solution?

hahina seguro ang binabato na band 28 kaya mayat maya ay nag 3/xx

 

[zmike182]

hahina seguro ang binabato na band 28 kaya mayat maya ay nag 3/xx

so wala pong magagawa dyan lods? napansin ko lng po kasi sa unli 299 d naman sya lumilipat or nag Xx
pero.sa rocket sim panay na xx nya

 

[sherree]

ito pala dapat yung command..

ubus call router set_dropbear_info '{"dropbear_mode":"1","dropbear_key_type":"0"}'

Salamat po dito.

 

[Xpmove12]

Lods may nahanap kang openwrt na firmware?

Pag na open na ssh at Telnet mga, Lodi. Working na rin ba yung Winscp na ginamit pang dukot at upgrade firmware ng R051 at R01. Ano sa tingin nyo

Gaya dunsa Firmware ng Evoluzn Fx-id3(cat 4) working sa Fx Id4(cat 6 Lte advanced)

Baka pwede rin ipasok yung V008 or V10 firmware ng R051 kay R281

Ano sa tingin nyo mga ka phc, sino gusto sacrificed 1 pc R281

R051 v008 firmware

You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.

R051 V006 Firmware with Winscp from Master Zander telnet user pass: root

 

[L E N A R]

Pag na open na ssh at Telnet mga, Lodi. Working na rin ba yung Winscp na ginamit pang dukot at upgrade firmware ng R051 at R01. Ano sa tingin nyo

Gaya dunsa Firmware ng Evoluzn Fx-id3(cat 4) working sa Fx Id4(cat 6 Lte advanced)

Baka pwede rin ipasok yung V008 or V10 firmware ng R051 kay R281

Ano sa tingin nyo mga ka phc, sino gusto sacrificed 1 pc R281

R051 v008 firmware

You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.

Oo pwedi nang magamit Winscp pag naka enable na ang SSH....
may Dump na ako ng R281 di ko lang alam kung alin eh edit ko

 

[Xpmove12]

Oo pwedi nang magamit Winscp pag naka enable na ang SSH....
may Dump na ako ng R281 di ko lang alam kung alin eh edit ko

Ayos pag ganun na Master

Mag isa kac r281 ko baka madali, yung super rich jan Donate isa kay Master Lenar, para sa experiment code r281

Kahit may outdated firmware pala, yari din sa auto update, need talaga ma block yung auto update mga ka phc, mukhang kelangan experiment code r281, mukhang kelangan din ma try firmware ng R051 kung gagana

 

[oblivion85]

so wala pong magagawa dyan lods? napansin ko lng po kasi sa unli 299 d naman sya lumilipat or nag Xx
pero.sa rocket sim panay na xx nya

Try mo mag enable ng 3rd band like sakin dito mas maganda combination 1&3 instead of 3&28, that way may fallback ka pag n drop ang 28, check mo nalang which bands meron sa area nyo, then pili ka ng mas malakas na bands.

 

[oblivion85]

Pa confirm pala sa iba if nag pa password error pag nag log out sa ssh? So ginagawa ko nlang re enable ang telnet and redo yung passwd command then nag w work ulit ssh. Thanks.

 

[Toa]

Pa confirm pala sa iba if nag pa password error pag nag log out sa ssh? So ginagawa ko nlang re enable ang telnet and redo yung passwd command then nag w work ulit ssh. Thanks.View attachment 1614341

same pero di ganyan error sakin. ang nangyari sakin may password akong nilagay nakalimutan ko hahaha. open telnet ulit tas lagay ulit dropbear commands maliban dun sa ubus tapos passwd tapos close ssh. oks naman na sya

 

[H4wk3ye]

Pa confirm pala sa iba if nag pa password error pag nag log out sa ssh? So ginagawa ko nlang re enable ang telnet and redo yung passwd command then nag w work ulit ssh. Thanks.View attachment 1614341

Ok naman wala pa namang error.

 

[oblivion85]

same pero di ganyan error sakin. ang nangyari sakin may password akong nilagay nakalimutan ko hahaha. open telnet ulit tas lagay ulit dropbear commands maliban dun sa ubus tapos passwd tapos close ssh. oks naman na sya

I see, sakin tama naman password but somehow nag e error everytime na logout ako, tried resetting na rin yung variables same error din.

 

[Xpmove12]

Ok naman wala pa namang error.

View attachment 1614352

Buti pa yung r281 natin may pag-asa yung lumang fx-id3 pinatulan ni pldt, nawala rin openline at bandlocking, d na rin nagana smart at tnt sim, block na rin port sa Telnet, pinalitan na rin admin advance Password, iba naman pinagbuntunan ni Pldt nalipat sa Luma, hahaha umaabot din kac 25 to 40mbps.

Syempre lahat ng naka dito sim, wala na rin sa fx-id3

Lipat na sa Huawei B525 white/black Mamba, expensive, hahahha

Mga Lodi, Masters cno kaya gusto Isugal r281 sa R051 firmware. Mukhang working

 

[oblivion85]

Some small tip pala isang feature that I've always wanted sa router is to enable some Wifi downtime say turn off the wifi from 1:30am - 4:00am; working pala yung luci commands as a cronjob; ⇨ /etc/crontabs/root, then restart the modem nalang to enable.

yung format is min - hr, yung other * for day week month; so 30 1 * * * wifi down will turn off wifi at 1:30 daily and turn it back on at 4:00 daily din.

Now I'm trying to explore how to turn off the LEDs, so far read-only pala yun /sys/class/leds so if meron maka discover pa comment nalang thanks.

Edit: I was able to turn off one LED lang yung rapidly blinking active data transfer led by commenting out yung ledtrigger service under ⇨ /etc/init.d/services.init.

 

[L E N A R]

Pa confirm pala sa iba if nag pa password error pag nag log out sa ssh? So ginagawa ko nlang re enable ang telnet and redo yung passwd command then nag w work ulit ssh. Thanks.View attachment 1614341

ganito na lang gawin mo pag katapos mong irun yung command na.

ubus call router set_dropbear_info '{"dropbear_mode": "1","dropbear_key_type": "99"}'

then eh change mo na yung default password ng ssh

fw_setenv dropbear_password yourpass

pag ka tapos reboot mo lang at tapos na
kahit ilang restore factory reset hindi mawawala yung password

 

[oblivion85]

Thanks, q pala ano command mo boss to show running services like htop? Or separate package to install pa?

 

[L E N A R]

Thanks, q pala ano command mo boss to show running services like htop? Or separate package to install pa?

run mo lang yung command na PS

 

[oblivion85]

run mo lang yung command na PS

Thanks, so far wala nako makita service related to ota and auto upgrade . Maybe about to release na ng update ang pldt we never know. Hopefully mag work mga spells ahaha.

 

[L E N A R]

Thanks, so far wala nako makita service related to ota and auto upgrade . Maybe about to release na ng update ang pldt we never know. Hopefully mag work mga spells ahaha.

sana nga mag work