Cfw openwrt request_releases:(openvpn for 4mb routers)

[linux_noob]

boss pa isang kulit pa...eto netgear wireless g router WGR614 v9

not supported! better luck next time...

 

[Sarahjhane05]

not supported! better luck next time...

hahahahahahaha...cge nxtime hanap pako sa mga tropa ko....sky router pwede bha

 

[linux_noob]

hahahahahahaha...cge nxtime hanap pako sa mga tropa ko....sky router pwede bha

wag ka nang mag-hanap pa ng iba... tplink na lang targetin mong router

 

[Sarahjhane05]

wag ka nang mag-hanap pa ng iba... tplink na lang targetin mong router

cge cge boss..tnx sa advice

 

[SEPOY-PHC]

naka-openwrt ka na di ba? upgrade firmware ka lang. UNCHECK keep settings sa pag-uupgrade para ma-iwasan possible errors. eto firmware mo. ka-bubuild ko lang.

tplink MR3420 v2 CFW / Openwrt 18.06.1

You do not have permission to view the full content of this post. Log in or register now.

naka-openwrt ka na di ba? upgrade firmware ka lang. UNCHECK keep settings sa pag-uupgrade para ma-iwasan possible errors. eto firmware mo. ka-bubuild ko lang.

tplink MR3420 v2 CFW / Openwrt 18.06.1

You do not have permission to view the full content of this post. Log in or register now.

thank you so much. update ako boss pag na upgrade ko na thanks

 

[YAMYAM1029]

TPLink WA801ND v3 CFW

You do not have permission to view the full content of this post. Log in or register now.

maraming salamat master

 

[linux_noob]

maraming salamat master

Welcome! working sa yo?

 

[YAMYAM1029]

error master ?

 

[linux_noob]

View attachment 521785

error master ?

subukan mong i-rename yung bin file. make it short like openwrt.bin

use factory bin kasi naka-stock firmware ka pa? at sure ka bang V3 801nd router mo?

 

[YAMYAM1029]

subukan mong i-rename yung bin file. make it short like openwrt.bin

use factory bin kasi naka-stock firmware ka pa? at sure ka bang V3 801nd router mo?

ganun pa din master.. yep stock firmware pa

 

[linux_noob]

View attachment 521809


View attachment 521810


ganun pa din master.. yep stock firmware pa

sir paki-send dito screenshot ng router info sticker sa likod or sa ilalim ng router mo. subukan kong mag-rebuild ng cfw para sa router mo mamayang gabi.

 

[YAMYAM1029]

sir paki-send dito screenshot ng router info sticker sa likod or sa ilalim ng router mo. subukan kong mag-rebuild ng cfw para sa router mo mamayang gabi.

ito master..maraming salamat

 

[linux_noob]

ito master..maraming salamat

ok abangan mo mamayang gabi... re-upload ako ng new cfw para jan.

 

[YAMYAM1029]

ma

ok abangan mo mamayang gabi... re-upload ako ng new cfw para jan.

maraming salamat master

 

[YAMYAM1029]

ok abangan mo mamayang gabi... re-upload ako ng new cfw para jan.

master wala pa bang cfw ? thank you in advance

 

[SEPOY-PHC]

thank you so much. update ako boss pag na upgrade ko na thanks

boss sa pano po mag add ng vpn dun? na upgrade ko na boss. thanks

 

[linux_noob]

master wala pa bang cfw ? thank you in advance

sensya na sir. late reply. busy lang talaga. pasilip silip lang ako dito sa phc. anyways about your router. i found out na naka-locked na pala firmware ng ganyang router starting from version 3. Nag-tataka kasi ako kung bakit nag-eerror sayo yung cfw build ko since sa pagkaka-tanda ko nung binuild ko yun eh wala naman akong na-encounter na error sa image builder kaya nag-search ako openwrt page and here is the info that i got...

"Since v3 hardware, TP-Link has started shipping with the new locked TP-link firmware. Investigation into this locking mechanism is still in progress, but the device does support tftp flashing. To use this feature, press and hold the reset button while powering on. The device will use the ip address 192.168.0.86, and attempt to load a new firmware from a tftp server at 192.168.0.66. The v3 is looking for the file: wa801ndv3_tp_recovery.bin. Rename your openwrt-ar71xx-generic-tl-wa801nd-v3-squashfs-factory.bin file to wa801ndv3_tp_recovery.bin, confirmed working as of trunk r49037. "

sir subukan mo yang procedures na nilagay ko diyan.

may cfw builds are targeted for tplink router that has unlocked bootloader. check mo kung gagana yang procedures na yan.

 

[linux_noob]

boss sa pano po mag add ng vpn dun? na upgrade ko na boss. thanks

gamit ka winscp sa windows. upload mo yung ovpn files sa /root folder.

command for running ovpn files stored at /root folder is

cd /root

openvpn filename ng ovpn mo example

openvpn sg1server.ovpn

kung gusto mong palitan yung 3 default na monthlysg servers

lagay mo yung ovpn file mo sa folder na /root/openvpn_default_servers

delete/replace mo na lang yung file na 1.ovpn 2.ovpn 3.ovpn ng sarili mong ovpn

 

[YAMYAM1029]

sensya na sir. late reply. busy lang talaga. pasilip silip lang ako dito sa phc. anyways about your router. i found out na naka-locked na pala firmware ng ganyang router starting from version 3. Nag-tataka kasi ako kung bakit nag-eerror sayo yung cfw build ko since sa pagkaka-tanda ko nung binuild ko yun eh wala naman akong na-encounter na error sa image builder kaya nag-search ako openwrt page and here is the info that i got...

"Since v3 hardware, TP-Link has started shipping with the new locked TP-link firmware. Investigation into this locking mechanism is still in progress, but the device does support tftp flashing. To use this feature, press and hold the reset button while powering on. The device will use the ip address 192.168.0.86, and attempt to load a new firmware from a tftp server at 192.168.0.66. The v3 is looking for the file: wa801ndv3_tp_recovery.bin. Rename your openwrt-ar71xx-generic-tl-wa801nd-v3-squashfs-factory.bin file to wa801ndv3_tp_recovery.bin, confirmed working as of trunk r49037. "

sir subukan mo yang procedures na nilagay ko diyan.

may cfw builds are targeted for tplink router that has unlocked bootloader. check mo kung gagana yang procedures na yan.

maraming salamat sa tulong mo sir master try ko to..feedback ako sa status

 

[PHC-Phats]

boss ano maganda router na supported sa openwrt na kaya ang 10 device at ok ang speed?