👨‍🏫 Tutorial How to openline (unlock) and debrand huawei e5573cs-933 (globe)

[acacis]

try ko nga to, sana walang maging problema

 

[zirhcarmstrong]

Sira yung file?

 

[zirhcarmstrong]

HxD pano po ba yun eh wala naman nalabas na serial

 

[zirhcarmstrong]

Sorry for the double post. After third fails. inassemble ko nlng ulit ung device. nakikita ko nman sa wifi ang HUAWEI-4050 (default:HUAWEI-6FF5). kaso di ko alam ang password.

EDIT: Replugged device to another pc, merong nadetect na device sa This PC (My Computer). Ran the Autorun file at nag pop-up na ang home page. Now stuck sa Modify Password, ano default password nito?

pano po ba yan?? Wala pong nalabas na code pag inoopen ko yung HxD

 

[zirhcarmstrong]

Thank you nagets ko na, pero nahirapan ako sa HXD ah. again thank you po ulet super helpful sia.

sir pano yung sa HxD

 

[zirhcarmstrong]

Sir may file access required. Pa accept po nung request

 

[geeversal]

Hi, is this user still active?

 

[geeversal]

Meron 4G LTE. Pero mahina ang signal ng Smart at Sun sa bahay ko, kaya lalakad pa ako ng ilang metro para makasagap ng LTE.

Ang Globe ay malakas kahi sa loob ng babay.View attachment 287274 View attachment 287275

Hi sir, san ko pwede icontact? Meron kasi akong offer sir.

 

[wan23]

i am ali from pakistan . i am working on huawei modem development .i will share method with you thats not vipe NV data . you can just unlock our modem without losing imei seriel webui etc . if you use usbloader.bin then your device performance will be low .
now i created p.a.t.c.h loader for you.

1.boot pin it you will show 1 port name in device manger (pu ui interface- com1 ) . now open p.a.t.c.h loader file and type here com port number .
for example
comport number is com1 . write 1 and type on (enter) .

2.after load my p.a.t.c.h loader you will see 2 com ports in device manger
pc ui interface
application interface

3>now run downgrade firmware 21.320.99.05.00
click on start and finish it .

4> after run terminal and connect to pc ui interface.
and type this command here AT^NVWREX=8268,0,12,1,0,0,0,2,0,0,0,A,0,0,0
this command will be unlock your modem ......

5>now you run upgraded setup 21.326.13.00.00
and click on start and upgrade it . your modem will be unlocked .

file list
You do not have permission to view the full content of this post. Log in or register now.

May nakapg try ba nitong method na to?

 

[HornyDevil]

penge po link ng DC unlocker. ty.

 

[HornyDevil]

working to. kaka try ko lang ngayon.

 

[qkwyx]

working to. kaka try ko lang ngayon.

alin ang na try mo boss? yung quote ni wan23?

 

[navenz_01]

Sa win 10 need i-p@tch yung registry para magwork yung usb device not recognied. Install niyo to sa registry tapos reinstall niyo required drivers, Restart PC. Profit...

You do not have permission to view the full content of this post. Log in or register now.

thanks much sa info ka PHC binasa din sa wakas yung pocket wifi ko sa win 10 na laptop ko,

 

[navenz_01]

A ver big thanks ts sa TUT mo at sa thread nimo nakatulong talaga ng malaki, 100% successfully kung na unlock pocket wifi ko TS, keep share TS nice one

 

[HornyDevil]

alin ang na try mo boss? yung quote ni wan23?

yung tutorial mismo sa page 1.

 

[redarchers]

many thaks sir I'm successfully open line my new huawei E5573CS-933..

 

[eliasdeejay]

Unlocked my pocket wifi thanks

 

[Aztrin_GE]

Success! Salamat dito paps

 

[TRIUNE85]

Sakin un globe ko open na din.

 

[mykeviper23]

Success! Salamat dito paps

congrats! welcome to the club