Globe RainX The101 Bricked

[Qawe_1423]

kaya yan maibalik

Nabalik kuna Product S/N kaso pag reboot lang nag survive sa factory reset hindi. may tutorial ka boss don sa dalawa?

 

[edcyreysase]

Nabalik kuna Product S/N kaso pag reboot lang nag survive sa factory reset hindi. may tutorial ka boss don sa dalawa?

AT Commands na try mo po?

 

[gerald janua]

TS Thank you sa MTK tool mo na recover kuna router . May signal narin and band lock works fine.
Ang nawawala nalang ay yung Board SN, Product SN at Hardware version. If ever my suggestion po yung marurunong sa ganito paturo kung kaya pa mablik haha kung hindi na kaya okey lang working naman na.

View attachment 4355832

rom-tool and command lods

 

[Qawe_1423]

Ok na po Ito lang ginamit kong command.

mkdir -p /data/jytl_factory
printf '%s' 'Qawe' > /data/jytl_factory/product_sn
printf '%s' 'Qawe' > /data/jytl_factory/board_sn
printf '%s' 'V1.0' > /data/jytl_factory/hw_ver
/etc/init.d/rpcd restart

 

[gerald janua]

Ok na po Ito lang ginamit kong command.

mkdir -p /data/jytl_factory
printf '%s' 'Qawe' > /data/jytl_factory/product_sn
printf '%s' 'Qawe' > /data/jytl_factory/board_sn
printf '%s' 'V1.0' > /data/jytl_factory/hw_ver
/etc/init.d/rpcd restart

mas ok rom-tool command lods

 

[piolopipapz]

May free openline ba sa modem nato ?

meron papz kay boss bugok

 

[Hazel-]

Pano po kung ganto, ang intindi ko may nawawala ata file ako, tanda ko kasi tong mtk client may DA file dati to sa phone na ginamitan ko noon

MS-7C83:~/mtkclient_UnbrickThe101$ sudo python3 mtk.py rl out_folder --skip userdata
Preloader - Status: Waiting for PreLoader VCOM, please reconnect mobile/iot device to brom mode

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.


..........
Port - Device detected
Preloader - Detected regular mode !
Preloader - CPU: MT6880/MT6890 Modem()
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11003000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x992
Preloader - Target config: 0x5
Preloader - SBC enabled: True
Preloader - SLA enabled: False
Preloader - DAA enabled: True
Preloader - SWJTAG enabled: True
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: False
Preloader - Mem write auth: False
Preloader - Cmd 0xC8 blocked: False
Preloader - Get Target info
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca01
Preloader - SW Ver: 0x1
Preloader - ME_ID: 12F2CA45A7FB5C1735F9A297DC75B886
Mtk - We're not in bootrom, trying to crash da...
Exploitation - Crashing da...
Preloader
Preloader - [LIB]: upload_data failed with error: DAA_SIG_VERIFY_FAILED (0x7024)
Preloader
Preloader - [LIB]: Error on uploading da data
Preloader - Status: Waiting for PreLoader VCOM, please reconnect mobile/iot device to brom mode

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.


Port - Device detected
Preloader - Detected regular mode !
Preloader - CPU: MT6880/MT6890 Modem()
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11003000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x992
Preloader - Target config: 0xe5
Preloader - SBC enabled: True
Preloader - SLA enabled: False
Preloader - DAA enabled: True
Preloader - SWJTAG enabled: True
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: True
Preloader - Mem write auth: True
Preloader - Cmd 0xC8 blocked: True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca01
Preloader - SW Ver: 0x1
Preloader - ME_ID: 12F2CA45A7FB5C1735F9A297DC75B886
Preloader
Preloader - [LIB]: Auth file is required. Use --auth option.
PLTools - Loading payload from generic_patcher_payload.bin, 0x538 bytes
Exploitation - Kamakiri Run
Exploitation
Exploitation - [LIB]: Error on sending payload.
PLTools
PLTools - [LIB]: Error on sending payload: /home/joreg/mtkclient_UnbrickThe101/mtkclient/payloads/generic_patcher_payload.bin
MS-7C83:~/mtkclient_UnbrickThe101$

 

[edcyreysase]

Preloader - SBC enabled: True
Preloader - SLA enabled: False
Preloader - DAA enabled: True

Patched yung modem na ginagamit mo po...

 

[Hazel-]

Patched yung modem na ginagamit mo po...

Naka bugok firmware po yan, gusto ko po sana ma backup also gusto ko din po bumalik sa stock firmware kung possible po gamit yung ginawa nyo po

Also naka fusion firmware ako ngayon