Globe RainX The101 Bricked

Prophecy666 · Thu at 11:23 PM

May free openline ba sa modem nato ?

zuudash1 · Fri at 3:54 AM

Pabookmark for future reference

marukoy · Fri at 9:59 AM

edcyreysase said:
edcyreysase said:

You do not have permission to view the full content of this post. Log in or register now.

Eto na guys. Refer nalang dito sa Github ko po hehe

Reply lang kung may question. Thanks!

Click to expand...

edcyreysase · Fri at 12:04 PM

marukoy said:
[Hidden content]

Di pa tested po. paki try nalang

edcyreysase · Fri at 12:05 PM

Qawe_1423 said:
View attachment 4335587
May pag asa paba to TS. haha

saan po yung Serial located po hehe. tas pa send nalang full log nang iyan po

Qawe_1423 · Fri at 12:42 PM

edcyreysase said:
saan po yung Serial located po hehe. tas pa send nalang full log nang iyan po

marukoy · Fri at 7:11 PM

edcyreysase said:
Di pa tested po. paki try nalang

ako na magsasabi hindi yan gagana at di gumana

jcamanansala · Fri at 7:16 PM

Ayaw talaga sa Windows, Ubuntu WSL.

Qawe_1423 · Fri at 9:26 PM

edcyreysase said:
saan po yung Serial located po hehe. tas pa send nalang full log nang iyan po

C:\Users\Administrator\Downloads\mtkclient_UnbrickThe101-main>python mtk.py --preloader preloader.bin w rootfs_a C:\Users\Administrator\Downloads\rootfs_a.img
Preloader - Status: Waiting for PreLoader VCOM, please reconnect mobile/iot device to brom mode

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.

.....Port - Device detected

Preloader - Detected regular mode !
Preloader - CPU: MT6880/MT6890 Modem()
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11003000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x992
Preloader - Target config: 0xe0
Preloader - SBC enabled: False
Preloader - SLA enabled: False
Preloader - DAA enabled: False
Preloader - SWJTAG enabled: False
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: True
Preloader - Mem write auth: True
Preloader - Cmd 0xC8 blocked: True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca01
Preloader - SW Ver: 0x1
Preloader - ME_ID: 2025874F5F2DE0AB63875732107A1C94
DaHandler - Device is unprotected.
DaHandler - Device is in BROM-Mode. Bypassing security.
DaHandler - Unprotected device, we assume we can ρá†ch directly !
DaHandler
DaHandler - [LIB]: Failed to dump preloader from ram, provide a valid one via --preloader option
DAXML - Uploading xflash stage 1 from MTK_DA_V6.bin
XmlFlashExt - Patching da2 ...
DA2 32-Bit detected.
XmlFlashExt
XmlFlashExt - [LIB]: Write not allowed not patched.
XmlFlashExt
XmlFlashExt - [LIB]: Hash binding not patched.
DAXML - Successfully uploaded stage 1, jumping ..
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DAXML - DA Stage 1 successfully loaded.
DAXML - Uploading stage 2...
Progress: |██████████| 100.0% Upload: (0x2CAA0/0x2CAA0), 661.43 KB/s
DAXML - Successfully booted to stage 2
DAXML - Reconnected to DA stage 2
DAXML
DAXML - [LIB]: xread: Wrong length (0 bytes: empty)
DAXML - DA XML SLA is disabled
XmlFlashExt
XmlFlashExt - [LIB]: UFS ufshcd_queuecommand not found, skipping UFS ρá†ch.
Main - Handling da commands ...
DAXML - Batch done: 0x400 bytes, total 0x400/0x400
Progress: |██████████| 100.0% Upload: (0x4000000/0x4000000), 31.08 MB/s s left
Wrote C:\Users\Administrator\Downloads\rootfs_a.img to sector 616512 with sector count 131072.

C:\Users\Administrator\Downloads\mtkclient_UnbrickThe101-main>python mtk.py --preloader preloader.bin w rootfs_a C:\Users\Administrator\Downloads\rootfs_b.img

Successful naman yung upload nung rootfs_a.img at rootfs_b.img using windows TS. kaso dead parin haha. Wala na ata pag asa yung sakin. Ito pa Log nya sa UART same nung kanina

[DL] 00009C40 00000000 010701

F0: 102B 0000
F3: 4002 0000 [0200]
F3: 1006 0033
F3: 4001 00E0
F2: 1002 0000
F6: 102C 0000
F1: 1004 0000
F1: 1004 0000 [0200]
00: 1005 0000
F3: 4002 0000 [0200]
F3: 4001 00E0
F2: 1002 0000
F6: 102C 0000
01: 102A 0001
02: C001 0001
03: 1027 0001
04: 1005 0000
BP: 0860 00D0 [0001]
EC: 0000 0000 [0200]
T0: 0000 A0DE [010A]
System halt!

edcyreysase · Sat at 12:19 AM

marukoy said:
ako na magsasabi hindi yan gagana at di gumana

aights aights. kung hindi, hinde.

edcyreysase · Sat at 12:30 AM

Qawe_1423 said:
C:\Users\Administrator\Downloads\mtkclient_UnbrickThe101-main>python mtk.py --preloader preloader.bin w rootfs_a C:\Users\Administrator\Downloads\rootfs_a.img
Preloader - Status: Waiting for PreLoader VCOM, please reconnect mobile/iot device to brom mode

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.

.....Port - Device detected
Preloader - Detected regular mode !
Preloader - CPU: MT6880/MT6890 Modem()
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11003000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x992
Preloader - Target config: 0xe0
Preloader - SBC enabled: False
Preloader - SLA enabled: False
Preloader - DAA enabled: False
Preloader - SWJTAG enabled: False
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: True
Preloader - Mem write auth: True
Preloader - Cmd 0xC8 blocked: True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca01
Preloader - SW Ver: 0x1
Preloader - ME_ID: 2025874F5F2DE0AB63875732107A1C94
DaHandler - Device is unprotected.
DaHandler - Device is in BROM-Mode. Bypassing security.
DaHandler - Unprotected device, we assume we can ρá†ch directly !
DaHandler
DaHandler - [LIB]: Failed to dump preloader from ram, provide a valid one via --preloader option
DAXML - Uploading xflash stage 1 from MTK_DA_V6.bin
XmlFlashExt - Patching da2 ...
DA2 32-Bit detected.
XmlFlashExt
XmlFlashExt - [LIB]: Write not allowed not patched.
XmlFlashExt
XmlFlashExt - [LIB]: Hash binding not patched.
DAXML - Successfully uploaded stage 1, jumping ..
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DAXML - DA Stage 1 successfully loaded.
DAXML - Uploading stage 2...
Progress: |██████████| 100.0% Upload: (0x2CAA0/0x2CAA0), 661.43 KB/s
DAXML - Successfully booted to stage 2
DAXML - Reconnected to DA stage 2
DAXML
DAXML - [LIB]: xread: Wrong length (0 bytes: empty)
DAXML - DA XML SLA is disabled
XmlFlashExt
XmlFlashExt - [LIB]: UFS ufshcd_queuecommand not found, skipping UFS ρá†ch.
Main - Handling da commands ...
DAXML - Batch done: 0x400 bytes, total 0x400/0x400
Progress: |██████████| 100.0% Upload: (0x4000000/0x4000000), 31.08 MB/s s left
Wrote C:\Users\Administrator\Downloads\rootfs_a.img to sector 616512 with sector count 131072.

C:\Users\Administrator\Downloads\mtkclient_UnbrickThe101-main>python mtk.py --preloader preloader.bin w rootfs_a C:\Users\Administrator\Downloads\rootfs_b.img

Successful naman yung upload nung rootfs_a.img at rootfs_b.img using windows TS. kaso dead parin haha. Wala na ata pag asa yung sakin. Ito pa Log nya sa UART same nung kanina

[DL] 00009C40 00000000 010701

F0: 102B 0000
F3: 4002 0000 [0200]
F3: 1006 0033
F3: 4001 00E0
F2: 1002 0000
F6: 102C 0000
F1: 1004 0000
F1: 1004 0000 [0200]
00: 1005 0000
F3: 4002 0000 [0200]
F3: 4001 00E0
F2: 1002 0000
F6: 102C 0000
01: 102A 0001
02: C001 0001
03: 1027 0001
04: 1005 0000
BP: 0860 00D0 [0001]
EC: 0000 0000 [0200]
T0: 0000 A0DE [010A]
System halt!

Anong firmware version po ba ito originally before po nagkaganito po?

try mo po flash seccfg.img and lk_a.img lk_b.img

Qawe_1423 · Sat at 5:52 AM

edcyreysase said:
Anong firmware version po ba ito originally before po nagkaganito po?

try mo po flash seccfg.img and lk_a.img lk_b.img

C:\Users\Administrator\Desktop\mtkclient_UnbrickThe101-main>python mtk.py --preloader preloader.bin w lk_a C:\Users\Administrator\Desktop\RA_M1_v7.00.02g\lk_a.img
Preloader - Status: Waiting for PreLoader VCOM, please reconnect mobile/iot device to brom mode

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.

.........Port - Device detected

Preloader - Detected regular mode !
Preloader - CPU: MT6880/MT6890 Modem()
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11003000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x992
Preloader - Target config: 0xe0
Preloader - SBC enabled: False
Preloader - SLA enabled: False
Preloader - DAA enabled: False
Preloader - SWJTAG enabled: False
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: True
Preloader - Mem write auth: True
Preloader - Cmd 0xC8 blocked: True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca01
Preloader - SW Ver: 0x1
Preloader - ME_ID: 2025874F5F2DE0AB63875732107A1C94
DaHandler - Device is unprotected.
DaHandler - Device is in BROM-Mode. Bypassing security.
DaHandler - Unprotected device, we assume we can ρá†ch directly !
DaHandler
DaHandler - [LIB]: Failed to dump preloader from ram, provide a valid one via --preloader option
DAXML - Uploading xflash stage 1 from MTK_DA_V6.bin
XmlFlashExt - Patching da2 ...
DA2 32-Bit detected.
XmlFlashExt
XmlFlashExt - [LIB]: Write not allowed not patched.
XmlFlashExt
XmlFlashExt - [LIB]: Hash binding not patched.
DAXML - Successfully uploaded stage 1, jumping ..
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DAXML - DA Stage 1 successfully loaded.
DAXML - Uploading stage 2...
Progress: |██████████| 100.0% Upload: (0x2CAA0/0x2CAA0), 1.29 MB/s
DAXML - Successfully booted to stage 2
DAXML - Reconnected to DA stage 2
DAXML
DAXML - [LIB]: xread: Wrong length (0 bytes: empty)
DAXML - DA XML SLA is disabled
XmlFlashExt
XmlFlashExt - [LIB]: UFS ufshcd_queuecommand not found, skipping UFS ρá†ch.
Main - Handling da commands ...
DAXML - Batch done: 0x400 bytes, total 0x400/0x400
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x400 bytes, total 0x400/0x400
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x4200 bytes, total 0x4200/0x4200
Done |██████████| 100.0% Upload: (0x100000/0x100000),0.00 MB/s
Wrote C:\Users\Administrator\Desktop\RA_M1_v7.00.02g\lk_a.img to sector 545856 with sector count 2048.

C:\Users\Administrator\Desktop\mtkclient_UnbrickThe101-main>python mtk.py --preloader preloader.bin w lk_b C:\Users\Administrator\Desktop\RA_M1_v7.00.02g\lk_b.img
Preloader - Status: Waiting for PreLoader VCOM, please reconnect mobile/iot device to brom mode

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.

...........

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.

Port - Device detected

Preloader - Detected regular mode !
Preloader - CPU: MT6880/MT6890 Modem()
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11003000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x992
Preloader - Target config: 0xe0
Preloader - SBC enabled: False
Preloader - SLA enabled: False
Preloader - DAA enabled: False
Preloader - SWJTAG enabled: False
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: True
Preloader - Mem write auth: True
Preloader - Cmd 0xC8 blocked: True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca01
Preloader - SW Ver: 0x1
Preloader - ME_ID: 2025874F5F2DE0AB63875732107A1C94
DaHandler - Device is unprotected.
DaHandler - Device is in BROM-Mode. Bypassing security.
DaHandler - Unprotected device, we assume we can ρá†ch directly !
DaHandler
DaHandler - [LIB]: Failed to dump preloader from ram, provide a valid one via --preloader option
DAXML - Uploading xflash stage 1 from MTK_DA_V6.bin
XmlFlashExt - Patching da2 ...
DA2 32-Bit detected.
XmlFlashExt
XmlFlashExt - [LIB]: Write not allowed not patched.
XmlFlashExt
XmlFlashExt - [LIB]: Hash binding not patched.
DAXML - Successfully uploaded stage 1, jumping ..
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DAXML - DA Stage 1 successfully loaded.
DAXML - Uploading stage 2...
Progress: |██████████| 100.0% Upload: (0x2CAA0/0x2CAA0), 1.72 MB/s
DAXML - Successfully booted to stage 2
DAXML - Reconnected to DA stage 2
DAXML
DAXML - [LIB]: xread: Wrong length (0 bytes: empty)
DAXML - DA XML SLA is disabled
XmlFlashExt
XmlFlashExt - [LIB]: UFS ufshcd_queuecommand not found, skipping UFS ρá†ch.
Main - Handling da commands ...
DAXML - Batch done: 0x400 bytes, total 0x400/0x400
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x400 bytes, total 0x400/0x400
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x4200 bytes, total 0x4200/0x4200
Done |██████████| 100.0% Upload: (0x100000/0x100000),0.00 MB/s
Wrote C:\Users\Administrator\Desktop\RA_M1_v7.00.02g\lk_b.img to sector 944192 with sector count 2048.

C:\Users\Administrator\Desktop\mtkclient_UnbrickThe101-main>python mtk.py --preloader preloader.bin w seccfg C:\Users\Administrator\Desktop\RA_M1_v7.00.02g\seccfg.img
Preloader - Status: Waiting for PreLoader VCOM, please reconnect mobile/iot device to brom mode

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.

....Port - Device detected

Preloader - Detected regular mode !
Preloader - CPU: MT6880/MT6890 Modem()
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11003000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x992
Preloader - Target config: 0xe0
Preloader - SBC enabled: False
Preloader - SLA enabled: False
Preloader - DAA enabled: False
Preloader - SWJTAG enabled: False
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: True
Preloader - Mem write auth: True
Preloader - Cmd 0xC8 blocked: True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca01
Preloader - SW Ver: 0x1
Preloader - ME_ID: 2025874F5F2DE0AB63875732107A1C94
DaHandler - Device is unprotected.
DaHandler - Device is in BROM-Mode. Bypassing security.
DaHandler - Unprotected device, we assume we can ρá†ch directly !
DaHandler
DaHandler - [LIB]: Failed to dump preloader from ram, provide a valid one via --preloader option
DAXML - Uploading xflash stage 1 from MTK_DA_V6.bin
XmlFlashExt - Patching da2 ...
DA2 32-Bit detected.
XmlFlashExt
XmlFlashExt - [LIB]: Write not allowed not patched.
XmlFlashExt
XmlFlashExt - [LIB]: Hash binding not patched.
DAXML - Successfully uploaded stage 1, jumping ..
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DAXML - DA Stage 1 successfully loaded.
DAXML - Uploading stage 2...
Progress: |██████████| 100.0% Upload: (0x2CAA0/0x2CAA0), 1.29 MB/s
DAXML - Successfully booted to stage 2
DAXML - Reconnected to DA stage 2
DAXML
DAXML - [LIB]: xread: Wrong length (0 bytes: empty)
DAXML - DA XML SLA is disabled
XmlFlashExt
XmlFlashExt - [LIB]: UFS ufshcd_queuecommand not found, skipping UFS ρá†ch.
Main - Handling da commands ...
DAXML - Batch done: 0x400 bytes, total 0x400/0x400
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x400 bytes, total 0x400/0x400
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x200 bytes, total 0x200/0x200
DAXML - Batch done: 0x4200 bytes, total 0x4200/0x4200
Done |██████████| 100.0% Upload: (0x80000/0x80000),0.00 MB/s
Wrote C:\Users\Administrator\Desktop\RA_M1_v7.00.02g\seccfg.img to sector 272448 with sector count 1024.

C:\Users\Administrator\Desktop\mtkclient_UnbrickThe101-main>

Upload successful naman, pero same parin error.
Hindi ko tanda kung anung V7 to TS. Haha

edcyreysase · Sat at 10:34 AM

Qawe_1423 said:
Upload successful naman, pero same parin error.
Hindi ko tanda kung anung V7 to TS. Haha

try mo po boot_a tas boot_b. kung di parin, try mo po isa-isahin po

Qawe_1423 · Sat at 6:45 PM

edcyreysase said:
try mo po boot_a tas boot_b. kung di parin, try mo po isa-isahin po

Ayaw parin TS. Pero thank you sa pag tulong and sa Tools mo bypass security PL. Try ko sa SPflash tool V6

jcamanansala · Sat at 11:18 PM

TS, baka may DA file ka na ginamit dito baka pwede makahingi?

marukoy · Sat at 11:20 PM

edcyreysase said:
try mo po boot_a tas boot_b. kung di parin, try mo po isa-isahin po

pakilapag ng software version nyo po ng the101.

jcamanansala · Sat at 11:29 PM

marukoy said:
pakilapag ng software version nyo po ng the101.

edcyreysase · Sun at 12:31 AM

marukoy said:
pakilapag ng software version nyo po ng the101.

Yung latest po. RA_M1_v7.2.03g

jcamanansala · Sun at 11:43 AM

TS, ang weird ng unit ko kasi dapat false lahat to. Baka meron kang DA or .auth file na pwede ko itest. Un na lang talaga kulang ko.

Preloader - SBC enabled: True
Preloader - SLA enabled: False
Preloader - DAA enabled: True

...DeviceClass - Detected 0xe8d:0x2000 device at: COM5
Port - Device detected

Port - Handshake successful.
Preloader - Detected regular mode !
Preloader - CPU: MT6880/MT6890 Modem()
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11003000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x992
Preloader - Target config: 0x5
Preloader - SBC enabled: True
Preloader - SLA enabled: False
Preloader - DAA enabled: True
Preloader - SWJTAG enabled: True
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: False
Preloader - Mem write auth: False
Preloader - Cmd 0xC8 blocked: False
Preloader - Get Target info
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca01
Preloader - SW Ver: 0x1
Preloader - ME_ID: 2A89263494E179E2C9FD527E1C40D0FE
Mtk - We're not in bootrom, trying to crash da...
Exploitation - Crashing da...
Preloader
Preloader - [LIB]: upload_data resp error : Cannot configure port, something went wrong. Original message: PermissionError(13, 'Access is denied.', None, 5)
Preloader
Preloader - [LIB]: Error on uploading da data
Preloader - Status: Waiting for PreLoader VCOM, please reconnect mobile/iot device to brom mode

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.

...DeviceClass - Detected 0xe8d:0x3 device at: COM10
Port - Device detected

Port - Handshake successful.
Preloader - Detected regular mode !
Preloader - CPU: MT6880/MT6890 Modem()
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11003000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x992
Preloader - Target config: 0xe5
Preloader - SBC enabled: True
Preloader - SLA enabled: False
Preloader - DAA enabled: True
Preloader - SWJTAG enabled: True
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: True
Preloader - Mem write auth: True
Preloader - Cmd 0xC8 blocked: True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca01
Preloader - SW Ver: 0x1
Preloader - ME_ID: 2A89263494E179E2C9FD527E1C40D0FE
Preloader
Preloader - [LIB]: Auth file is required. Use --auth option.
PLTools - Loading payload from generic_patcher_payload.bin, 0x538 bytes
Exploitation - Kamakiri Run
Exploitation
Exploitation - [LIB]: Error on sending payload.
PLTools
PLTools - [LIB]: Error on sending payload: C:\Users\ADMIN\Downloads\mtkclient_UnbrickThe101-main\mtkclient\payloads\generic_patcher_payload.bin

edcyreysase · Sun at 12:35 PM

jcamanansala said:
TS, ang weird ng unit ko kasi dapat false lahat to. Baka meron kang DA or .auth file na pwede ko itest. Un na lang talaga kulang ko.

Preloader - SBC enabled: True
Preloader - SLA enabled: False
Preloader - DAA enabled: True

...DeviceClass - Detected 0xe8d:0x2000 device at: COM5
Port - Device detected
Port - Handshake successful.
Preloader - Detected regular mode !
Preloader - CPU: MT6880/MT6890 Modem()
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11003000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x992
Preloader - Target config: 0x5
Preloader - SBC enabled: True
Preloader - SLA enabled: False
Preloader - DAA enabled: True
Preloader - SWJTAG enabled: True
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: False
Preloader - Mem write auth: False
Preloader - Cmd 0xC8 blocked: False
Preloader - Get Target info
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca01
Preloader - SW Ver: 0x1
Preloader - ME_ID: 2A89263494E179E2C9FD527E1C40D0FE
Mtk - We're not in bootrom, trying to crash da...
Exploitation - Crashing da...
Preloader
Preloader - [LIB]: upload_data resp error : Cannot configure port, something went wrong. Original message: PermissionError(13, 'Access is denied.', None, 5)
Preloader
Preloader - [LIB]: Error on uploading da data
Preloader - Status: Waiting for PreLoader VCOM, please reconnect mobile/iot device to brom mode

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.

...DeviceClass - Detected 0xe8d:0x3 device at: COM10
Port - Device detected
Port - Handshake successful.
Preloader - Detected regular mode !
Preloader - CPU: MT6880/MT6890 Modem()
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11003000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x992
Preloader - Target config: 0xe5
Preloader - SBC enabled: True
Preloader - SLA enabled: False
Preloader - DAA enabled: True
Preloader - SWJTAG enabled: True
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: True
Preloader - Mem write auth: True
Preloader - Cmd 0xC8 blocked: True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca01
Preloader - SW Ver: 0x1
Preloader - ME_ID: 2A89263494E179E2C9FD527E1C40D0FE
Preloader
Preloader - [LIB]: Auth file is required. Use --auth option.
PLTools - Loading payload from generic_patcher_payload.bin, 0x538 bytes
Exploitation - Kamakiri Run
Exploitation
Exploitation - [LIB]: Error on sending payload.
PLTools
PLTools - [LIB]: Error on sending payload: C:\Users\ADMIN\Downloads\mtkclient_UnbrickThe101-main\mtkclient\payloads\generic_patcher_payload.bin

Ahh ganyan pala kung bago

Globe RainX The101 Bricked

Eternal Poster

Forum Expert

Leecher

Leecher

Enthusiast

Forum Expert

Enthusiast

Enthusiast

Leecher

Leecher

Enthusiast

Leecher

Enthusiast

Enthusiast

Forum Expert

Enthusiast

Leecher

Enthusiast

Leecher

Similar threads

About this Thread

Trending Topics

Online now

Forum statistics