Converge Bida Fiber ZTE F679W modem to F670L???

[mrpaupable]

Mga Boss baka naman pwede magpatulong???
Currently Naka Converge Bida fiber ako with ZTE F679W modem, Sinubukan ko gamitin yung disconnected ZTE F670L ko dito pero wala syang internet, may paraan kaya para mapagana ko sya?

Kailangan ko kasi since kailangan naka LAN connection kami sa work, eh ung current zte f679w modem ng bida fiber hindi ma-open yung LAN kahit sa admin access...

Nag-try nako bumili ng Xiaomi 5g Wifi Repeater kaso bumagal sya at hindi stable ang connection...

PATULONG MGA REPAPIPS

 

[trettet]

hindi tlga yan gagana kasi iba ang GPON S/N ng dalawang modem/ONT. Hindi "linya" sa poste ang basehan sa Fiber pra ma ka pag connect ng modem sa network nila kundi ung GPON serial number. Tignan mo sticker sa likod mag kaiba ang GPON S/N.

Para ma change and F670L serial number
Unlock telnet:

1. Download tool: You do not have permission to view the full content of this post. Log in or register now.
2. Install requirements: "pip install -r requirements.txt"
3. Command: "python3 zte_factroymode.py --user admin--pass Converge@zte123 --ip 192.168.1.1 --port 80 telnet open"
4. Login to telnet: "telnet 192.1681.1", use login from step 3.
5. Change GPON S/N and Vendor id
"setmac 1 2176 xxxx" - Vendor ID
"setmac 1 2177 xxxxxxxxx" - Serial Number
6. Set VLAN ID to Surf2Sawa VLAN

 

[mrpaupable]

hindi tlga yan gagana kasi iba ang GPON S/N ng dalawang modem/ONT. Hindi "linya" sa poste ang basehan sa Fiber pra ma ka pag connect ng modem sa network nila kundi ung GPON serial number. Tignan mo sticker sa likod mag kaiba ang GPON S/N.

Para ma change and F670L serial number
Unlock telnet:

1. Download tool: You do not have permission to view the full content of this post. Log in or register now.
2. Install requirements: "pip install -r requirements.txt"
3. Command: "python3 zte_factroymode.py --user admin--pass Converge@zte123 --ip 192.168.1.1 --port 80 telnet open"
4. Login to telnet: "telnet 192.1681.1", use login from step 3.
5. Change GPON S/N and Vendor id
"setmac 1 2176 xxxx" - Vendor ID
"setmac 1 2177 xxxxxxxxx" - Serial Number
6. Set VLAN ID to Surf2Sawa VLAN

Hello boss tinatry ko na to pero di ko po magets ung no.2 san ko po kukunin ung iinstall?
can you explain po sana for like me na di gaano sanay pa

nagkakaerror master pano kaya to

 

[trettet]

Hello boss tinatry ko na to pero di ko po magets ung no.2 san ko po kukunin ung iinstall?
can you explain po sana for like me na di gaano sanay pa

nagkakaerror master pano kaya toView attachment 3603416

install po muna kayo ng python po... python3: You do not have permission to view the full content of this post. Log in or register now.
requirement cya para ma run ang script, pde nyo i remove afterwards kun di nyo na need

for more info, if meron kayo #forbidden#, join us a häçkgpon #forbidden# channel: https://#forbidden#.gg/efDzz8Dt
edit: bawal pala sa rules, pero search nyo lng sa google häçk GPON

 

[mrpaupable]

naka dL na ko nyan boss na install na din ito na new error ko

install po muna kayo ng python po... python3: You do not have permission to view the full content of this post. Log in or register now.
requirement cya para ma run ang script, pde nyo i remove afterwards kun di nyo na need
View attachment 3603443
for more info, if meron kayo #forbidden#, join us a häçkgpon #forbidden# channel: https://#forbidden#.gg/efDzz8Dt
edit: bawal pala sa rules, pero search nyo lng sa google häçk GPON

Kaka-Download and Install ko lang nyan master...ito na new error ko

 

[trettet]

yeah i think meron issue sa requirements.txt
just install manually

pip install requests pycryptodome pyinstaller

 

[mrpaupable]

an

yeah i think meron issue sa requirements.txt
just install manually

pip install requests pycryptodome pyinstaller

o po next ko gagawin?

 

[trettet]

python3 zte_factroymode.py --user admin--pass Converge@zte123 --ip 192.168.1.1 --port 80 telnet open

then telnet to your modem, use the login generated

telnet 192.168.1.1

tapos un na

setmac 2176 vendorid
setmac 2177 serial
reboot

sa serial number ganito format S/N: ZTEG12ABCD576
Vendor Id = ZTEG
Serial = remaining characters

kopyahin mo lang ang vendor id at serial ng S2S mo

then next step kopyahin mo VLAN settings

 

[mrpaupable]

same po eh module not found

 

[trettet]

ano output ng "pip install requests pycryptodome pyinstaller"?

try mo rin
pip3 install requests pycryptodome pyinstaller

if not
python3 -m pip install requests pycryptodome pyinstaller

 

[mrpaupable]

ok ung pinaka-huli na code, sa telnet nlang ako di makapasok "Could not open connection to the host, on port 23: Connect failed" na-open ko na nman ung Telnet Client sa Control Panel pero ganyan padin

 

[trettet]

^iscreenshot mo daw step by step

like ano na output ng

python3 zte_factroymode.py --user admin--pass Converge@zte123 --ip 192.168.1.1 --port 80 telnet open

kailangan naka kabit ang Converge modem mo pag nag run ka nyan

 

[mrpaupable]

ano output ng "pip install requests pycryptodome pyinstaller"?

try mo rin
pip3 install requests pycryptodome pyinstaller

if not
python3 -m pip install requests pycryptodome pyinstaller

"Could not open connection to the host, on port 23: Connect failed"

 

[trettet]

may syntax error pala sorry, may space dapat each argument between user and pass.. ito gamitin mo ulti

python3 zte_factroymode.py --user admin --pass Converge@zte123 --ip 192.168.1.1 --port 80 telnet open

 

[mrpaupable]

may syntax error pala sorry, may space dapat each argument between user and pass.. ito gamitin mo ulti

python3 zte_factroymode.py --user admin --pass Converge@zte123 --ip 192.168.1.1 --port 80 telnet open

ang galing ahaha Wait po nakapasok nako sa TELNET

GG na temp. lock ako...ayaw kasi pumasok nung
admin
Converge@zte123

 

[trettet]

ung username and password sa telnet is ung output ng

python3 zte_factroymode.py --user admin --pass Converge@zte123 --ip 192.168.1.1 --port 80 telnet open

irun mo lang iyan ulit tapos ma uunlock na
parang user=xxxx&pass=xxx

or irestart mo lng ung converge modem

 

[mrpaupable]

ung username and password sa telnet is ung output ng

python3 zte_factroymode.py --user admin --pass Converge@zte123 --ip 192.168.1.1 --port 80 telnet open

irun mo lang iyan ulit tapos ma uunlock na
parang user=xxxx&pass=xxx

or irestart mo lng ung converge modem

typo error dw po

 

[trettet]

setmac 1 2176 xxxx
setmac 1 2177 xxxxxx pala

kulang ng 1

 

[mrpaupable]

ok na master napakahusay

 

[trettet]

reboot

pra ma apply
tapos kopyahin mo VLAN settings

i login mo sa web

username: admin
password: Converge@zte123

sample, critical info is ung VLAN ID ng S2S kopyahin mo sa Converge ZTE

di ako familiar sa S2S na ZTE na admin, pero try mo rin, ganyan din ata ang password nya..
basta ung Internet VLAN ID kopyahin mo

iba din VLAN ID ng TR069, ginagamit ni Converge ang TR069 for monitoring purposes, pero di cya requirement pra mag ka internet ka

ung Internet VLAN ID lang importante