🔒 Closed How to repair bm622 2009 blank wan

[AnotherWays]

enable telnet
follow this

telnet 192.168.1.1
Login: wimax
PASS: wimax820

ATP> display allmacaddr
ATP> setallmacaddr "enter your Mac"
ATP> save
ATP> exit

Upload ng Fresh ADVANCE config file (SEE IN THE ATTACHMENT)
Run the bm622 2011 (Upgrader Tool)
Upgrade to 2011 firmware.


After Successful Upgrade


telnet 192.168.1.1
Login:Firefly
PASS: $P4mb1h1r4N4m4nT0!!

ATP> display allmacaddr
ATP> "set serial number command"
ATP> xiugai macdizhi "Your Mac"
ATP> diag restore default

Done! {Blank Wan Solve}

For Manual Upgrade via CMD
1. Copy the bm622firmware.bin to c:\(your firmware file location)
2. RUN cmd
3. cd "c:/" then press Enter
4. tftp –i 192.168.1.1 put bm622firmware.bin
5. wait till finish
6. done!

 

[EXCLUSTEVE]

thanks try ko mamaya to

 

[AnotherWays]

thanks try ko mamaya to

sige lang po

 

[headknocker]

How to enable TFTP Service?

Go to start menu and type "Turn Windows Features on or off" in the Search bar and select the 1st result and press Enter


a window will popped-up. After the window loads, look for TFTP Client, tick the checkbox and click OK

The window will automatically close, please wait a moment.

 

[PrincessX122]

kuya pwide po ba to sa WinSpreader?? ang firmware ayaw kasi mag load ehh laging retry .

 

[AnotherWays]

kuya pwide po ba to sa WinSpreader?? ang firmware ayaw kasi mag load ehh laging retry .

opo pwede po

 

[PrincessX122]

ayaw din gomagana.. sa winSpreder. di ma kita ang file po.

 

[headknocker]

ayaw din gomagana.. sa winSpreder. di ma kita ang file po.

Hindi babasahin ng winspreader yung firmware kasi bin file po ang format. I-upload nyo na lang via GUI mismo o kaya via TFTP

 

[kikokiko]

Sir, connected po b yan sa ganitong problem po ..salamat po..... pano po ggawin ko pde dito ....

 

[PrincessX122]

GUI di ako maka pasok sa admin?? user lang

Hindi babasahin ng winspreader yung firmware kasi bin file po ang format. I-upload nyo na lang via GUI mismo o kaya via TFTP

 

[ulanbukas]

pa try nga po sir 2009

 

[Senpai]

Tested mo na to? may dalawa kase akong 2009 blank wan e

 

[Wangerts]

nice thread

 

[nitz9318]

Thank You Sir sa pag share di ko na nga alam ang gagawin ko sa BM622 ko thanks ulit

 

[khaydee]

pa try po sir salamat

 

[lheyo]

View attachment 17535

enable telnet
follow this

telnet 192.168.1.1
Login: wimax
PASS: wimax820

ATP> display allmacaddr
ATP> setallmacaddr "enter your Mac"
ATP> save
ATP> exit

Upload ng Fresh ADVANCE config file (SEE IN THE ATTACHMENT)
Run the bm622 2011 (Upgrader Tool)
Upgrade to 2011 firmware.


After Successful Upgrade


telnet 192.168.1.1
Login:Firefly
PASS: $P4mb1h1r4N4m4nT0!!

ATP> display allmacaddr
ATP> "set sêrïâl number command"
ATP> xiugai macdizhi "Your Mac"
ATP> diag restore default

Done! {Blank Wan Solve}

For Manual Upgrade via CMD
1. Copy the bm622firmware.bin to c:\(your firmware file location)
2. RUN cmd
3. cd "c:/" then press Enter
4. tftp –i 192.168.1.1 put bm622firmware.bin
5. wait till finish
6. done!

tanx...pa bookmarks po muna,,,

 

[ulanbukas]

asan pala config na ilalagay?

 

[pantyliner69]

thanks po dito nagawa ko po wimax ng kapitbahay namen

 

[Hacki20]

bakit hindi maupgrade bm622 2009 puro retry may ibang ways pa ba?

 

[silver1603]

May naka try na ba? working po ba?