🛠️ Tools Free CFW: Full OpenVPN for Openwrt Routers

[kolpiup]

sir pwede po kaya ako mka hinge access?

 

[linux_noob]

ginawa ko po procedure sir nagflash ako via wifi kasi nga po wala ako pc,nasa 40% na sya bigla nalang wala connection sa wifi.tapos yun na po reboot nalang sya

so nag-flash ka via stock tplink firmware upgrade page. ok, alin po sa 2 file yung ginamit mo?

 

[PHC-Shawn]

supported po to pero di ko pa na-bubuild. ill release your firmware tomorrow. paki-antay na lang

Thank you very much boss aabangan ko po

 

[xingkit]

so nag-flash ka via stock tplink firmware upgrade page. ok, alin po sa 2 file yung ginamit mo?

ung una po ginamit ko sir kasi nga po stock fw pa po sya

 

[linux_noob]

ung una po ginamit ko sir kasi nga po stock fw pa po sya

factory or sysupgrade bin file? just answer it... thanks

 

[xingkit]

sec. lng reboot

factory or sysupgrade bin file? just answer it... thanks

factory po

 

[linux_noob]

sec. lng reboot

factory po

nung na-disconnect ka sa wifi while flashing is still on 40%, ano ginawa mo?

1. inibo or nireboot mo ba yung router manually?
2. sinubukan mo ba ulet kumonek sa wifi ng router?

 

[xingkit]

nung na-disconnect ka sa wifi while flashing is still on 40%, ano ginawa mo?

1. nireboot mo ba yung router?
2. sinubukan mo ba ulet kumonek sa wifi ng router?

nireboot sir
di na ko makakonek sa wifi po kasi nagrereboot nlang sya,saka di na po maacess ang wifi

 

[linux_noob]

nireboot sir
di na ko makakonek sa wifi po kasi nagrereboot nlang sya,saka di na po maacess ang wifi

so nireboot mo manually, indi mo hinayaan na mag-reboot ng kusa yung router? i need an honest answer so can i help you fix your problem or check if there is something on the firmware that i gave you.

 

[xingkit]

hanggang dyan lang po tapos nadisconnected na sa wifi

 

[linux_noob]

View attachment 560308hanggang dyan lang po tapos nadisconnected na sa wifi

tapos ikaw mismo nag-reboot ng router?

 

[xingkit]

so nireboot mo manually, indi mo hinayaan na mag-reboot ng kusa yung router? i need an honest answer so can i help you fix your problem or check if there is something on the firmware that i gave you.

ano po fb nyo sir,pakita ko po kung paano sya magreboot kanina flash ko.di ko po yata pwede upload dito...yes po nireboot ko manual kasi nga po nawala ang wifi connection ko, nataranta nako kaya nireboot ko.

 

[xingkit]

tapos ikaw mismo nag-reboot ng router?

yes po,tapos yun na anggang reboot nlang

 

[linux_noob]

ano po fb nyo sir,pakita ko po kung paano sya magreboot kanina flash ko.di ko po yata pwede upload dito...yes po nireboot ko manual kasi nga po nawala ang wifi connection ko, nataranta nako kaya nireboot ko.

that was your BIGGEST MISTAKE!!! dapat indi mo pinaka-alaman yung router while flashing process is still in progress. normal na lang yun na ma-disconnect ka sa wifi, kasi nirereload nung router yung mga drivers while flashing so ma-didisconnect ka talaga sa wifi. kung hinayaan mo lang sana mag-reboot yung router ng sarili. this bricking will not happen. kahit disconnected ka sa wifi flashing is still happening on the router itself, dapat hinayaan mo na lang na mag-reboot ng kusa yung router.

confirmed it was your flashing procedure mistake. to all newbie here dont try this method. DONT EVER EVER INTERRUPT your router while flashing process is still on progress.

As for your brick router the only chance you can revive is to try tftp flashing. i will give you some link later about tftp flashing procedure. walang kasiguraduhan na mabubuhay ng tftp flashing yan.

kung indi kaya mabuhay ng tftp flashing, you can
also try serial port flashing too, mas madugo procedure nun kasi you need to solder some wires on tx rx grnd of your router. wala rin assurance na mabubuhay nito router mo. you will also need a usb serial port flashing device para makapag-serial port flashing ka. im sorry for your bricked router. wala akong kasalanan dyan. it is your own fault.

 

[paquiboto_20]

pa-rank ka muna sir. read rules number 1. gusto sanang kitang bigyan, pero it looks like that was your first post since you created your account.
magpa-tipaklong ka muna

ok po sir salamat nalang po sa sharing

 

[eyoh]

sa akin 10-15gb hindi na na block..LTE upgrade na ang gamet ko na sim..kasi na block eh..

ngayon hindi na..

yes basta upgrade sim na sir hehehe kahit t.u promo na din gamitin safe na test ko na XD

 

[xingkit]

that was your BIGGEST MISTAKE!!! dapat indi pinaka-alaman yung router while flashing progress is still in progress. normal na lang yun na ma-disconnect ka sa wifi, kasi nirereload nung router yung mga drivers while flashing so ma-didisconnect ka talaga sa wifi. kung hinayaan mo lang sana mag-reboot yung router ng sarili. this bricking will not happen. kahit disconnected ka sa wifi flashing is still happening on the router itself, dapat hinayaan mo na lang na mag-reboot ng kusa yung router.

confirmed it was your flashing procedur mistake. to all newbie here dont this method. DONT EVER EVER INTERRUPT your router while flashing progress is still on progress.

As for your brick router the only chance you can revive is to try tftp flashing. i will give you some link later about tftp flashing procedure. walang kasiguraduhan na mabubuhay ng tftp flashing yan.

kung indi kaya mabuhay ng tftp flashing, you can try serial port flashing too, mad madugo procedure kasi you need to solder some wires on tx rx grnd of your router. walang assurance na mabubuhay nito router mo. you will also need a usb serial port flashing device para makapag-serial port flashing ka. im sorry for bricked router. wala akong kasalanan dyan. it is your own fault.

cge po,sayang naexcited pa namn ako...

 

[romel_tech]

ser yong saken namn di talag ko makapasuk sa webgui patolung namn ser

 

[xingkit]

sayang ang router 8mb flash,250php bye bye

 

[linux_noob]

ser yong saken namn di talag ko makapasuk sa webgui patolung namn ser

reply ako later. charge muna ako ng phone.