🔒 Closed Connected but no browse

[OrochiDesu]

Bakit po ba di nag bo-browse yung sakin?
Connected po softether ko pero wala paring Internet. Pano ba to?

Pc gamit ko

 

[Serenitylove]

Natry mo po magreboot? Phone ba or pc?

 

[OrochiDesu]

Natry mo po magreboot? Phone ba or pc?

Sa pc po.

 

[Serenitylove]

PesteM DiabolicaE

 

[prince cedrick]

cmd / palit ng adapter

 

[Captain Underpants]

Madalas mangyari ito especially if you are connecting to a Local Bridge type of a Server which is currently prone to errors mostly if overly congested of TCP connections, brute-force or a DDOS attacks and or maybe just a badly-configured server.

Pwede rin na na-blocked ng Windows Firewall or Anti-Virus Firewall so you may have to temporarily turn it off..

You can try another SNAT server which is more stable and most produced type of server here in PHC.

If your familiar with settings on your Local Area Network adapter, you can manually connect by making a static ip and DNS address to your VPN Client Adapter.. below is

an example of IPv4 settings..

ip address: 192.168.30.18 (ipconfig /all at CMD to look for the given ip address and Gateway)
subnet mask: 255.255.255.0
gateway: 192.168.30.1

dns address: 8.8.8.8
secondary dns: 208.67.222.222


You may visit the UDPgate Thread for more queries...


Sincerely Yours,
Nyahahaha

 

[OrochiDesu]

Madalas mangyari ito especially if you are connecting to a Local Bridge type of a Server which is currently prone to errors mostly if overly congested of TCP connections, brute-force or a DDOS attacks and or maybe just a badly-configured server.

Pwede rin na na-blocked ng Windows Firewall or Anti-Virus Firewall so you may have to temporarily turn it off..

You can try another SNAT server which is more stable and most produced type of server here in PHC.

If your familiar with settings on your Local Area Network adapter, you can manually connect by making a static ip and DNS address to your VPN Client Adapter.. below is

an example of IPv4 settings..

ip address: 192.168.30.18 (ipconfig /all at CMD to look for the given ip address and Gateway)
subnet mask: 255.255.255.0
gateway: 192.168.30.1

dns address: 8.8.8.8
secondary dns: 208.67.222.222


You may visit the UDPgate Thread for more queries...


Sincerely Yours,
Nyahahaha

Try ko to paps. Salamat

 

[KriKri]

Thanks po