PHHow to Install
1.Extract Winwos 7 Loader.rar
2.Open Winwos 7 Loader Folder
3.Right Click Winwos Loader.exe
4.Run As Admin
5.Click Install (Your computer will restart)
If Windows failing to boot after you installed the loader? Just do the following.
Note: If the above doesn't fix your boot issue then use the command "bootsect.exe /nt60 ALL /force" instead. Just make sure you remove all USB flash drives before you use the command.
Have you installed the loader but you're not genuine? Just check the following.
Questions and answers
Q. The loaders status says "Modified - Uninstall other cracks", what do I do?
A. You can either find a way to uninstall the other cracks, download WAT Fix or format.You do not have permission to view the full content of this post. Log in or register now.
Q. The loaders status says "Unsupported partition table", why is this?
A. You're either using GPT on a UEFI motherboard or you've got a locked OEM partition. Both problems can be fixed by fully formatting your entire hard drive.
Q. I received the error message "Error finding your systems active partition", what do I have to do?
A. You need to format the whole hard drive with a program like Active@ Kill Disk. This issue is caused by your locked OEM partition. You do not have permission to view the full content of this post. Log in or register now.
Q. I received the error message "Failed to add loader to the boot code", what do I have to do?
A. Disable any system protection. Some types of software block the loader application from installing to the boot code.
Q. I've used a version of the loader before and it failed to work, what do I have to do?
A. If you previously used bootsect to get back into Windows then you first need to press uninstall, reboot and then install the newest version of the loader.
Q. Why was table sorting changed so that it's now disabled by default?
A. Some machines don't like the table order being changed so to make the loader more system compatible we disabled it by default.
Q. I've previously used another activation solution and I think it's modified my systems files, can I fix it?
A. You can first try to uninstall what you originally installed and then try running "sfc.exe /scannow" from command prompt as an administrator.
Q. I lose activation status after my systems been to sleep or has been in hibernation, can I fix it?
A. Go to the advanced options and select to disable type 4 memory, install the loader again and see if that cures it. If you're not cured try to disable type 3 memory instead. If it still fails try selecting the legacy setting.
Q. I installed the loader and my system hangs during the boot process, can I fix it?
A. Go to the advanced options and select to disable type 4 memory, install the loader again and see if that cures it. If you're not cured try to disable type 3 memory instead. If it still fails try selecting the legacy setting.
Q. I installed the loader and rebooted but I'm not activated. The loader application displays the message "BAD SLIC SIZE" or "BAD SLIC DATA", can I fix it?
A. Uninstall the loader, power down and then boot up the system again. Go to the applications advanced options and select to ignore the existing SLIC and then press install.
UEFI motherboards
The loader doesn't work when the systems using GPT. The workaround is to pre-format your hard drive so that it uses MBR instead.
From your BIOS select to boot the Windows DVD without UEFI, go to the repair options, select command prompt and then enter this:
diskpart
list disk
select disk 0
clean
convert mbr
create partition primary
select partition 1
format fs=ntfs quick
Boot the Windows DVD the same way you did the first time and then continue with the installation of Windows. Once complete you can then install the loader.
Checksums
File : Windows Loader.exe
CRC-32 : 46cb9b91
MD4 : d83bc83d477d5374a1025fb45c81fdea
MD5 : 5b56ddfb9e434f444354ab773b125f74
SHA-1 : 74f5913058b469bf6c2fe8f015d94e25edd8938b
You do not have permission to view the full content of this post. Log in or register now.
WINDOWS 8 PERMANENT Ac†ïvâ†ør
Installation Instructions:
How To Activate Windows Permanently
a] Extract rar Permanent Ac†ïvâ†ør
b] Open the folder "Permanent Ac†ïvâ†ør"
c] Right Click on "Windows 8 Permanent Ac†ïvâ†ør [x264+64]" and select "Run as Adminstrator" and let it extract
c] Now click on WINDOWS 8 INSTALL/UNINSTALL which will start the activation process in Windows CMD
d] CMD will ask to confirm the activation, then type Y and hit ENTER to start Activating.
e] Activation process may take couple of minutes.And also your PC will restart once activation is finished.
f] After activation is done and your PC restarts you will get a prompt saying Windows is ativated and other details.
Note : Windows 8 has special improvents as well as security.
Therefore, untill it is not activated, you wont be able to do any personalization to your pc.
This ac†ïvâ†ør must activate your windows Permanently and enable Personlization settings. If it fails to Enable Personlization Settings, Please follow the below instructions [Please remember not to do the below settings if your personalization settings are enabled.]
How to Enable Personalization Setting (First Activate Windows from above precedure)
These instructions are "ONLY AND ONLY" for those who are not able to access the personlization settings after Activating Windows Permanently.
a] Open the folder "Permanent Ac†ïvâ†ør"
b] Right Click on "Personalisation FIX" and select "Run as Adminstrator" and let it extract
3.b] Windows CMD will automatically Run fix and restart your PC
After restart, you should be able to Access Personlization settings.
You do not have permission to view the full content of this post. Log in or register now.
DONT FORGET TO HIT THANKS
1.Extract Winwos 7 Loader.rar
2.Open Winwos 7 Loader Folder
3.Right Click Winwos Loader.exe
4.Run As Admin
5.Click Install (Your computer will restart)
If Windows failing to boot after you installed the loader? Just do the following.
- Boot up the PC from your Windows installation disk
- Select the "Repair your computer" option
- Select "Command Prompt"
- Input "bootsect.exe /nt60 SYS /force" (without quotes)
- Restart the PC
Note: If the above doesn't fix your boot issue then use the command "bootsect.exe /nt60 ALL /force" instead. Just make sure you remove all USB flash drives before you use the command.
Have you installed the loader but you're not genuine? Just check the following.
- Check the details line contains "v2.1"
- Try to validate online at You do not have permission to view the full content of this post. Log in or register now.
Questions and answers
Q. The loaders status says "Modified - Uninstall other cracks", what do I do?
A. You can either find a way to uninstall the other cracks, download WAT Fix or format.You do not have permission to view the full content of this post. Log in or register now.
Q. The loaders status says "Unsupported partition table", why is this?
A. You're either using GPT on a UEFI motherboard or you've got a locked OEM partition. Both problems can be fixed by fully formatting your entire hard drive.
Q. I received the error message "Error finding your systems active partition", what do I have to do?
A. You need to format the whole hard drive with a program like Active@ Kill Disk. This issue is caused by your locked OEM partition. You do not have permission to view the full content of this post. Log in or register now.
Q. I received the error message "Failed to add loader to the boot code", what do I have to do?
A. Disable any system protection. Some types of software block the loader application from installing to the boot code.
Q. I've used a version of the loader before and it failed to work, what do I have to do?
A. If you previously used bootsect to get back into Windows then you first need to press uninstall, reboot and then install the newest version of the loader.
Q. Why was table sorting changed so that it's now disabled by default?
A. Some machines don't like the table order being changed so to make the loader more system compatible we disabled it by default.
Q. I've previously used another activation solution and I think it's modified my systems files, can I fix it?
A. You can first try to uninstall what you originally installed and then try running "sfc.exe /scannow" from command prompt as an administrator.
Q. I lose activation status after my systems been to sleep or has been in hibernation, can I fix it?
A. Go to the advanced options and select to disable type 4 memory, install the loader again and see if that cures it. If you're not cured try to disable type 3 memory instead. If it still fails try selecting the legacy setting.
Q. I installed the loader and my system hangs during the boot process, can I fix it?
A. Go to the advanced options and select to disable type 4 memory, install the loader again and see if that cures it. If you're not cured try to disable type 3 memory instead. If it still fails try selecting the legacy setting.
Q. I installed the loader and rebooted but I'm not activated. The loader application displays the message "BAD SLIC SIZE" or "BAD SLIC DATA", can I fix it?
A. Uninstall the loader, power down and then boot up the system again. Go to the applications advanced options and select to ignore the existing SLIC and then press install.
UEFI motherboards
The loader doesn't work when the systems using GPT. The workaround is to pre-format your hard drive so that it uses MBR instead.
From your BIOS select to boot the Windows DVD without UEFI, go to the repair options, select command prompt and then enter this:
diskpart
list disk
select disk 0
clean
convert mbr
create partition primary
select partition 1
format fs=ntfs quick
Boot the Windows DVD the same way you did the first time and then continue with the installation of Windows. Once complete you can then install the loader.
Checksums
File : Windows Loader.exe
CRC-32 : 46cb9b91
MD4 : d83bc83d477d5374a1025fb45c81fdea
MD5 : 5b56ddfb9e434f444354ab773b125f74
SHA-1 : 74f5913058b469bf6c2fe8f015d94e25edd8938b
You do not have permission to view the full content of this post. Log in or register now.
WINDOWS 8 PERMANENT Ac†ïvâ†ør
Installation Instructions:
How To Activate Windows Permanently
a] Extract rar Permanent Ac†ïvâ†ør
b] Open the folder "Permanent Ac†ïvâ†ør"
c] Right Click on "Windows 8 Permanent Ac†ïvâ†ør [x264+64]" and select "Run as Adminstrator" and let it extract
c] Now click on WINDOWS 8 INSTALL/UNINSTALL which will start the activation process in Windows CMD
d] CMD will ask to confirm the activation, then type Y and hit ENTER to start Activating.
e] Activation process may take couple of minutes.And also your PC will restart once activation is finished.
f] After activation is done and your PC restarts you will get a prompt saying Windows is ativated and other details.
Note : Windows 8 has special improvents as well as security.
Therefore, untill it is not activated, you wont be able to do any personalization to your pc.
This ac†ïvâ†ør must activate your windows Permanently and enable Personlization settings. If it fails to Enable Personlization Settings, Please follow the below instructions [Please remember not to do the below settings if your personalization settings are enabled.]
How to Enable Personalization Setting (First Activate Windows from above precedure)
These instructions are "ONLY AND ONLY" for those who are not able to access the personlization settings after Activating Windows Permanently.
a] Open the folder "Permanent Ac†ïvâ†ør"
b] Right Click on "Personalisation FIX" and select "Run as Adminstrator" and let it extract
3.b] Windows CMD will automatically Run fix and restart your PC
After restart, you should be able to Access Personlization settings.
You do not have permission to view the full content of this post. Log in or register now.
DONT FORGET TO HIT THANKS