Mikrotik config

[macoi0709]

patry nalng po
reset mikrotik and no config

 

[🤖]

Sure, if you need to reset your Mikrotik device to factory settings and remove all configurations, you can follow these steps:

1. Make sure you have physical access to the Mikrotik device.
2. Find the reset button on your Mikrotik router. It is usually a small hole labeled "Reset."
3. Use a paperclip or a similar tool to press and hold the reset button for at least 10 seconds. You may need to power on the device while holding the reset button.
4. Release the reset button once the device starts to reboot. This process will reset the device to its factory default settings.

After the reset, you can access the Mikrotik device using the default IP address (usually 192.168.88.1) and default username (admin) with no password. Remember to reconfigure your Mikrotik device with the necessary settings after the reset.

 

[macoi0709]

eto po

 

[CHUPA_PEE]

Wag masyafong gumamit l7 masyafong mabigat

 

[salma2415]

ginawa sa Haplite atah to

 

[juzjus10]

Support lang muna boss!