PLDT Boosteven R281 (Band Locking)

[gallium8]

Try pass notion, Lods

Or backread page 144 to 145, gayahin mo pag set ssh pass

To set up password, log in to telnet then type:
passwd
Pag na set up mo na yung password pwede ka na mag log in sa ssh with root as username and the password that you just set up

 

[pspx010]

Pwede gawin sa android smartphone na rooted, Lods

Install ka rin updated termux

Un lang wla nako rooted smartphone eh. Sya nga pla nakita ko nagpost si master zander mazda, openline with bandlocking na ung r281 nya. Permanent na kayo ung bandlocking nila kahit i reset.?

 

[Ulti_xplorer22]

Un lang wla nako rooted smartphone eh. Sya nga pla nakita ko nagpost si master zander mazda, openline with bandlocking na ung r281 nya. Permanent na kayo ung bandlocking nila kahit i reset.?

Mapapagastos kalang, Lods

Pag bibili ka pa sa iba'

Saka pwede naman tau bandlocking via ubus command sa ssh or termux

 

[thegenius]

sa wakas balik serbisyo na r281 ko hehehe madaming salamat sa master na nag remote.

 

[Ulti_xplorer22]

sa wakas balik serbisyo na r281 ko hehehe madaming salamat sa master na nag remote.

Nagpa remote ka, Lods

Kanino kay Master Zander or Zxshiels

 

[thegenius]

Nagpa remote ka, Lods

Kanino kay Master Zander or Zxshiels

kay Master Zxshiels

 

[Ulti_xplorer22]

kay Master Zxshiels

Oks Lodi, Kaya mo daw gawin ung request Aimee. Na maging permanent ung disabled r281

Ung D2k, hehe

 

[thegenius]

Oks Lodi, Kaya mo daw gawin ung request Aimee. Na maging permanent ung disabled r281

Ung D2k, hehe

d2k lang alam ko sa r281 may ginawa na si sir jerome na bin wala ng auto update yun yun din gamit ko.

 

[Ulti_xplorer22]

Without flashing customized firmware

edit yung cronstab at tr069 settings

d2k lang alam ko sa r281 may ginawa na si sir jerome na bin wala ng auto update yun yun din gamit ko.

Lods, Pero sabi, Lods Hawk.

May kulang daw inde na edit ung cronstab kaya mag a updates pa rin kac kulang da2

 

[thegenius]

Without flashing customized firmware

edit yung cronstab at tr069 settings



Lods, Pero sabi, Lods Hawk.

May kulang daw inde na edit ung cronstab kaya mag a updates pa rin kac kulang da2

not sure po pero yung gamit ko 24/7 na na andar di namn nag uupdate kaya sure ako na fully disabled na yung update. saka wala ng values yung mga tr069 nya para binura ata ng master pag compile nya ng bin.

 

[Ulti_xplorer22]

not sure po pero yung gamit ko 24/7 na na andar di namn nag uupdate kaya sure ako na fully disabled na yung update. saka wala ng values yung mga tr069 nya para binura ata ng master pag compile nya ng bin.

Wala pa kac new updates na Lumabas, Lods.

Na verify ni Lods, hawk kahapon open daw ung access dunsa cronstab kaya, need manual edit yung codes sa ssh/termux

 

[thegenius]

Wala pa kac new updates na Lumabas, Lods.

Na verify ni Lods, hawk kahapon open daw ung access dunsa cronstab kaya, need manual edit yung codes sa ssh/termux

as long as walang values yung config nya walang manyayari sa modem kasi error lang yun sa logs lalabas.

 

[Ulti_xplorer22]

as long as walang values yung config nya walang manyayari sa modem kasi error lang yun sa logs lalabas.

Oks Lodi sa r051 ko kc, nag updates pa rin sa latest version 10.1.1 kac kulang ung edit sa crons tab.

Ewan sa r281 kac, inde pa naglalabas baseband v5 na gaya sa r051

 

[_ameee]

Pano yan lods mag set ng permanent password. Pasensya na, gusto ko lang matuto peru if wala talaga, mag donate nalang ako.

Ito na yong router.

after enabling telnet...

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LOG IN TO TELNET
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
COPY and RUN these codes:
ubus call router set_dropbear_info '{"dropbear_mode":"1","dropbear_key_type":"99"}'
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
passwd

ENTER DESIRED Pásswørd

fw_setenv dropbear_password your created pw
EXAMPLE: fw_setenv dropbear_password root
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DISABLE TELNET AFTER CHANGING Pásswørd
ubus call wireless wifi_ate_disabled
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LOG IN TO SSH (USE PUTTY FOR WINDOWS)
vim /etc/init.d/services.init

NOTES: press 'i' to enter insert mode, do your edits # to comment out a line.
Then press ESC to enter normal mode again, then ":wq" to save and exit. If you made some mistakes you press ":q!" to quickly exit without saving, ":q" to also exit a file.
Also in normal mode you can press "dd" if you want to delete a line rather than commenting it out; keys h,j,k,l also acts as navigation keys in normal mode.


COMMENT OUT TR069 command using #
COMMENT OUT OTA command using #
SEE PAGE 28 by master LENAR
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------



-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
OPTIONAL: (by MASTER H4WK)

DISABLE TR069 Disclaimer: Not yet proven but until now modem not updated. Perform at your own risk. So far walang negative effect sa modem ko.
1. ssh 192.168.8.1

2. type cd //

3. type cd etc/config

4. type vim tr069 (vim is a linux text editor). below text will appear on console:
config tr069 option tr069_enable '1'
option dimcomplete '0'
option boot_state '0'
option acs_mreboot '0' o
ption conn_name 'roy'
option conn_psw 'roy'
option acs_url 'You do not have permission to view the full content of this post. Log in or register now.'
option acs_username 'notion'
option acs_password 'notion'
option inform_enable '1'
option inform_interval '300'
option manufacturer 'Mavell' o
ption model 'L20_1826_p704' o
ption oui '123456'

5. edit option tr069_enable '1' here's how to edit vim. - press insert - move cursor to the text to edit using arrow keys -
edit text to option tr069_enable '0' - press ESC -type :wq (that's colon + "wq")

6. DONE! -Other options I think is to comment out everything using "#" or delete the tr069 file but I haven't done these 2 yet. - there's also a file named " Firewall" in the same directory (etc/config), you can also use vim to edit the text and edit "ACCEPT" to "REJECT" or again comment out all the text using "#" yan ung last lods

para di ka na mahirapan lodi

 

[pspx010]

Hindi, nk

Mapapagastos kalang, Lods

Pag bibili ka pa sa iba'

Saka pwede naman tau bandlocking via ubus command sa ssh or termux

AOpenline na ung sa akin. I mean, kung nagawa na nila ipermanent na disabled na ung auto update. Ibig sabihin may pagasa pa talaga ung mga r281 natin sa permanent openline, bandlocking, etc...

 

[Ulti_xplorer22]

Hindi, nk
AOpenline na ung sa akin. I mean, kung nagawa na nila ipermanent na disabled na ung auto update. Ibig sabihin may pagasa pa talaga ung mga r281 natin sa permanent openline, bandlocking, etc...

Tama ka, Lods. Antay natin na may maglabas, full customized firmware na kumpleto block updates, used muna ung temporary block updates

Pwede lang kac ipatong sa mga naka unlock na at inde na rin mawawala

 

[_ameee]

not sure po pero yung gamit ko 24/7 na na andar di namn nag uupdate kaya sure ako na fully disabled na yung update. saka wala ng values yung mga tr069 nya para binura ata ng master pag compile nya ng bin.

ano version ng r281 mo lods?

ano version ng r281 mo lods?

at wala din bang issue after flashing? baka kasi mawala yung openline ng modem ko after flashing

 

[randomthinker123]

ano version ng r281 mo lods?


at wala din bang issue after flashing? baka kasi mawala yung openline ng modem ko after flashing

hindi naman lods nawawala openline after flashing. basta yubg mtd4 ang niflash.

 

[_ameee]

naiflash ko na. sadly, up parin yung files sa /rom/etc/config/ota or tr069 para sana unlireset na. wala ding nagbago sa tr069 ko at ota sa etc/config

 

[Black-Anbu]

Good evening mga lods. Pasenya na huling tanong at suko na ako

Pano to ma resolve? Ginaya ko lang sa vid tut peru may authentication hinihingi. Tia