❓ Help BM623M DG to 622M Problem

[HiV]

Nag downgrade ako ng Modem ko BM623M to 622M

Ayus pa naman sya dun sa GP procedure, na aaccess ko GUI nya dun..then after reflashing BM622M Firmware dun na ang problema ko..

1. GUI not accessed
2. Tapos continuous refreshing ng LAN nya

Sana me maka tulong sakin d2.

Maraming Salamat!!

 

[HiV]

After ko i hard reset need ko pa ba i unplug ung power sir?

Ilidan need ko pa ba mag static ip pag flash ako ng GP firmware?

 

[Yiskha]

unplug? yes....
static ip? no need ginagamit lang yun pag 169 ang ip mo,,,pero flashing ang best dun pag 169

 

[HiV]

Sir windspreader ang gamit ko kasi..so now ang modem ko is naka GP firmware kaso sabi mo hindi napatungan ng GP firmware..

Me ibang way pa ba pano ko downgrade to?

 

[Yiskha]

sabi mo hindi napatungan ng GP firmware

let me clear....diba galing sa bm623 to nagdown ka ng 622m but failed tama? kaya nagpalit ka ng gp firm...but nun nagchange ka ng 22m ulet ayan yung lumabas..tama ba pagkakaintindi ko?


eto yung sagot ko dyan,,,first yung downgrading mo from 23m to 22m dapat inulit mo lang... 2nd yung down mo naman sa gp to 22m hindi rin sya successful kasi gp parin yung logo mo need mo lang ulitin sya...

ang tanong ko lang alam mo ba yung tamang procedure at kung panu malaman kung tapos na ang flashing?

 

[HiV]

Ah ok!

Sir sa mga nabasa ko kasing mga tut is ganito

1st kasi need mo pa daw idowngrade ung 23m to GP then to 622m (un po kasi nabasa ko) so ang ginawa ko is that procedure..pero after the last procedure andun na ung error which is continuous refreshing ung lan connection lang..so yang pinakita ko sir na GP GUI is ung 1st Step lang po, so ung 1st step lang ang successful..GP to 622m = unsuccessful

 

[Yiskha]

ah,,,eh di ulitin mo lang flash mo lang ulet then if hindi kumagat hard reset unplug then plug...pag ayaw parin repeat procedure lang... basta sa flashing wait mong magsteady lahat ng lights as in steady hindi na umaandap andap...

 

[HiV]

ahhh ok..so ung ang problema..kasi hindi ko nahihintay ung andap andap..me katagalan pala dapat 5 mins hindi pa pwede sir?

 

[Yiskha]

hindi ko alam ilang minutes yun basta wait mong magsteady lahat ng lights at yun yung indication na fully flash na sya

 

[HiV]

cge sir maraming salamat..un cguro ang mali ko, tamang step pero kulang

 

[Yiskha]

madadali mo rin yan,,,pag nakuha mo yung tamang procedure pancit na pancit nalang sayo yang flashing

 

[Senpai]

ganito, ulitin ko ang procedure

from bm623m punta ka sa gui nya reflash mo dun firmware v4 greenpacket,or reflash mo sa winspread pero dapat alam mo proper procedure dito mahirap na,
then log in as admin then from gui ulit upload mo dun ang bm622m firmware v16 or 17 maalin sa dalawa
wag na yung iba para safe. after successful upgrade nya, magiging bm622m ya pero sa 10.1.1.254
gawin mo, Press mo 1 minute sa likod.
magiging okay na yan,

 

[Yiskha]

Lift :jawdrop:

 

[HiV]

Adda ditan ni boss Lift

Boss ito kasi ung problema nito eh..napansin ko kasi ung 623m ko eh na downgrade na..so nung pagdating sakin nung modem eh hindi ko na ma access ung GUI nya.Boss lift pa pm naman thanks.

 

[🤖]

Dear HiV,

Since 2 years have passed since the last reply in this thread, I am locking it to prevent necroposting. Feel free to start a new thread or contact any forum staff if you want this to be reopened.

Thread closed.