🔒 Closed PLDT FIBR SUPERADMIN ACCESS-RP2646 and RP2684

[gepongepon]

Thank you! Gumana na cya may tips po ba kayo para hindi nila muling iupdate yung settings? Thank you again intelligent masters!

 

[Telecommunications]

help po bkit gnito? i tried everything na paraan ..di maka pasok sa debug switch yn lng lumalabas
RP2631

 

[ickie1593]

help po bkit gnito? i tried everything na paraan ..di maka pasok sa debug switch yn lng lumalabas
RP2631

Try nyo po na iclose muna yung browser na gamit nyo then tska ulit kayo maglogin sa superadmin

 

[arkimonching]

Sir, I already enabled all lan ports via admin access ang prob ko is no internet connection pa din ung ports 2-4 ko? Pano kaya workaround dito sir?

 

[araragi05]

Boss, tatlong apply button po ang nandiyan. Make sure na pag na-enable mo na click mo ang tamang apply. If i-enable mo ang Web admin switch click apply yung sa ilalim ng enable ganon din sa telnet switch.

Pag ka apply ko po nung mga option jan, pagka reload ng browser, nabalik po sa pagging disabled sya,

 

[ickie1593]

Pag ka apply ko po nung mga option jan, pagka reload ng browser, nabalik po sa pagging disabled sya,

Apply nyo po 1 by 1

 

[araragi05]

Apply nyo po 1 by 1

Ganon paren po sir.

 

[ickie1593]

Ganon paren po sir.

Kung Fibr ONU po modem nyo, try nyo po muna ireset gamit yung maliit na butas sa likod then tska nyo ireconfigurr. If Huawei naman po modem nyo, di po pwede ireset kasi kaylangan ireconfigure ng trch ang mga huawei modem

 

[arkimonching]

Sir, I already enabled all lan ports via admin access ang prob ko is no internet connection pa din ung ports 2-4 ko? Pano kaya workaround dito sir?

mga sir up ko lang question ko

 

[ickie1593]

mga sir up ko lang question ko

Kapag ganun po tawag nyo sa 171 tapos request po kayo paenable yung lan ports,,

Wala po kasi dynamic ip ang lan 2-4 kapag tayo nagenable

 

[arkimonching]

Kapag ganun po tawag nyo sa 171 tapos request po kayo paenable yung lan ports,,

Wala po kasi dynamic ip ang lan 2-4 kapag tayo nagenable

ok sir maraming salamat

 

[razorshock]

Natry ko naa naka ENABLE na ung Switch at Web option. Wala parin. Yung sa telnet GET Command, unknown command.

 

[drecki]

got it enabled. I had the same problem na d gumagana all passwords for RP2684,
I did this:
enabled telnet and web admin switch on debug, then went to cmd as admin and enabled user account on telnet. and logged in using adminpldt z6dUABtl270qRxt7a2uGTiw

it seems like the reason I was unable to log in was that the adminpldt account was disabled on telnet after a reboot

 

[ickie1593]

got it enabled. I had the same problem na d gumagana all passwords for RP2684,
I did this:
enabled telnet and web admin switch on debug, then went to cmd as admin and enabled user account on telnet. and logged in using adminpldt z6dUABtl270qRxt7a2uGTiw

it seems like the reason I was unable to log in was that the adminpldt account was disabled on telnet after a reboot

Kung nung wala pa po update ng RP2631 or later version si PLDT at naaccess nyo na po si adminpldt or si admin before, kung ano po yung pinalit nyo na password yun pa din po ang current password nya at hindi yung default password na nasa itaas

 

[PHC_Dret]

Bakit kaya nag error ako nag nilologin ko iyan? Thanks po

 

[veoseph]

Thank you.. RP2684.. Na=access ko na adminpldt using IE.

 

[PHC-Spectre]

Paward

 

[xConvictx]

Step 1. login as super admin use credentials below;
Fiberhome AN5506-04-FA (RP2631) / AN5506-04-FAT (RP2646) / HG6245D
Username: f~i!b@e#r$h%o^m*esuperadmin
Password: s(f)u_h+g|u
Step 2. Click on "Debug Switch" Enable the Web Admin Switch then click apply button. After that logout then login again your adminpldt account.

 

[zentrix06]

successfully logged onto telnet using gepon as username and password
and then username: enable and password: gepon as password for 2nd login

however "get web admin username adminpldt" returns unknown command kaya di ko pa rin maka-access adminpldt
ok na sana hanggang cd web.. tas hindi rin pala pwede =__=

View attachment 789631

Sir, nagtry ako gepon as username and pw kaso di nagwork. any other trick for this? Thanks in advance

 

[gwizcabanatuan]

This save my day lol