🔒 Closed Huawei Pocket Wifi E5573Cs-933 Openline with OpenTelnet & MODDED WEBUI 2019 SMS Fix !!!.....UPDATE.....!!!

[banong_gang]

Salamaf paps, need ko din ito.

 

[Makurpeng]

no need internet na yan try na tested ko yan

Hirap po magjumper dina sa pc namin. Di ma recognize yung usb kapag may nakalagay na wire.

 

[Makurpeng]

Hirap po magjumper dina sa pc namin. Di ma recognize yung usb kapag may nakalagay na wire.

Help naman po walang lumabas na dalawang FC port.

 

[Harold00221511]

Salamat sir

 

[Palay]

Thanks for sharing

 

[Bit-by-Bit]

Thanks for sharing try this later

 

[Maj_skie016]

Sino po may alam pano i open line ang GLOBE LTE MIFI? Patulong po, salamat!

 

[K1LLJ0Y]

pang openline din ba to?

 

[iamhao]

pamarka muna dito sir, salamat po

 

[Kevv]

Good sakin ts. hahaha ayos sya ewan ko nung no vpn ako tas may free mb nag abot ng 22mbps speed ko kaninang umaga nung naubos na net ko ayun vpn mode ulit hahaha ayos to gamitin kaso 1800mhz lang nagana.

 

[Schemix]

Help naman po walang lumabas na dalawang FC port.

install all drivers

 

[fabzkie]

thanks po for sharing sir

 

[KayleJae]

pano po ba gumawa ng jumper? tsaka san po kukuha ng panggawa

 

[Arabanot]

pano po ba gumawa ng jumper? tsaka san po kukuha ng panggawa

if may utp cable yan pwede yan

 

[KayleJae]

if may utp cable yan pwede yan

Pwede po ba yung parang string ng notebook? Or paper clip? Ano pong iba na pwedeng gawin na jumper? Ty po

 

[Arabanot]

Pwede po ba yung parang string ng notebook? Or paper clip? Ano pong iba na pwedeng gawin na jumper? Ty po

try mo yan kasi gamit ko utp cable eh para di na ako mag baklas ng cover sa pocketwifi ko

 

[enad11]

mga boss anu ba magandang pocket wifi ngaun? balak ko kasi bumili yun madali sana iunlock.

 

[Arabanot]

mga boss anu ba magandang pocket wifi ngaun? balak ko kasi bumili yun madali sana iunlock.

933 model may TUT na eh paano maopenline

 

[JohnFord TV]

working na working ts

 

[leovin1995]

Modified by Boss Jerome Laliag with Modded WEBUI


View attachment 632344
View attachment 632345
View attachment 632346
View attachment 632347


E5573Cs-933_UPDATE_21.326.13.00.00 v1.exe

Based on E5573Cs-933_UPDATE_21.326.13.00.00.BIN
Firmware Mod: 06-10-2019 7:30 PM

Firmware Changes

• Kernel tweaks
• Telnet enabled

Kung gusto nyo lagyan ng password ang telnet, iexecute nyo lang ang command na ito "passwd", then itype nyo ang password na iseset nyo. Ang telnet username nya ay "root" ang password ay yung sinet nyo.
Kung gusto nyo iremove ang password ng telnet, iexecute nyo lang ang command na ito "delpasswd".
Kapag gusto nyo naman idisable ang telnet, iexecute nyo lang ang command na ito "dtelnet". (Hindi nyo na maeenable ang telnet kapag dinisable nyo na. Solution is reflashing.)

• atc command added
• dtelnet command added to disable, remove or delete telnet in startup. (Optional pero yung sa akin dinisable ko para mabawasan ang ram usage, maliit lang kasi ram ng pocket wifi.)
• USSD enabled in WebUI (Note: USSD ay not working kapag naka 4G only or nakalocked sa frequency/band. Sa Auto, 2G and 3G lang ito nagana.)
• Frequency/Band Locker in WebUI
• DHCP DNS settings added in WebUI
• Add Device Information parameters in WebUI

How to flash?

* IMPORTANT *
BACKUP IMEI, SERIAL NUMBER and MAC ADDRESS.
* IMPORTANT *

0. Install Drivers from Drivers Folder
1. Do jumper method or open bootpin.jpg and connect micro usb cable at dapat may lalabas na huawei port sa device manager. Kapag wala, ulitin nyo ulit ang process.
View attachment 632348



2. Open Balong USB Downloader click Detect tapos click load choose usbloader.bin pagkatapos nyan may lalabas ng dalawang FC port ...

View attachment 632350
View attachment 632342



3. Open E5573Cs-933_UPDATE_21.326.13.00.00 v1.exe tapos at hintayin lumabas ang ?????????????? ganito.
View attachment 632351
View attachment 632352


4. Kapag nag install finish na, hugutin ang micro usb at ilagay ang battery.
5. Piliting buhayin ang pocket wifi via disconnecting/connecting battery and pressing power button. Kapag ayaw talagang mabuhay, ireflash nyo nalang ulit or ulitin nyo ulit ang step 1-4.
6. Kapag umilaw na, isaksak sa computer.
7. Iconnect ang pocket wifi via micro usb sa computer.

Note: Palitan nyo ng value yung mga nakalagay sa baba.

IF Detected yung pocket wifi nyu as Port sundin ang Option 1 pag detect as RNDIS sundin ang Option 2

Option 1---

Kapag detected ang pocket wifi as port, use DC Unlocker.
* Change Device Info via DC Unlocker
AT^PHYNUM=IMEI,864355037056782 - yung original imei nyu
AT^SN=XSR7S18620002446 - yung original serial nyu
AT^PHYNUM=MACWLAN,5C7D5EE5D8B2 - yung original mac address nyu
AT^SSID=0,"HUAWEI-D8B2" - yung original SSID nyu
AT^WIKEY=0,"86446092" - yung original wifipassword nyu
AT^INFORBU
AT^RESET


Option 2---

Kapag detected naman ang pocket wifi as RNDIS, use putty or telnet then ang IP Address nya ay 192.168.8.1
* Change Device Info via Telnet
atc AT^PHYNUM=IMEI,864355037056782 - yung original imei nyu
atc AT^SN=XSR7S18620002446 - yung original serial nyu
atc AT^PHYNUM=MACWLAN,5C7D5EE5D8B2 - yung original mac address nyu
atc AT^SSID=0,"HUAWEI-D8B2" - yung original SSID nyu
atc AT^WIKEY=0,"86446092" - yung original wifipassword nyu
atc AT^INFORBU
atc AT^RESET

View attachment 632353
View attachment 632354

Note: Palitan nyo ng value yung mga nakalagay sa taas.

* Meaning ng Commands
AT^PHYNUM=IMEI,000000000000000 - set device IMEI.
AT^SN=0000000000000000 - set device serial number.
AT^PHYNUM=MACWLAN,000000000000 - set device mac address.
AT^SSID=0,"HUAWEI-0000" - set device default wifi ssid.
AT^WIKEY=0,"00000000" - set device default wifi password.
AT^INFORBU - save all set config values in after reset.
AT^RESET - restart/reset device.

7. Hintayin mag mabuhay ang pocket wifi.
8. Then ireset nyo ang device nyo by pressing reset button sa pocket wifi para maset ang default values.




Download Files: You do not have permission to view the full content of this post. Log in or register now.
Password: brand ng Pocket Wifi

BIG CREDITS kay boss Jerome Laliag sa kanya galing yung firmware....