☁️ SoftEther Udpgate public softether relay servers

Cebu · May 4, 2018

Captain Underpants said:
Requirements:

Sobrang Pogi

Walang Mental Problems

hahahaha grabe ang requirements

Captain Underpants · May 4, 2018

yan2xme said:
sir palapag sa thread mo
Miami Server
Host: 45.77.75.87 or yanix01.softether.net
Port: 5555 or 443
Virtual Hub: YAN
Users: yan01,yan02,yan03 and yan04
Auth: Anonymous
Server Location: Miami
Limit Users: 30 users

UPDATE (5/3/2018):
Note wala na tong limit
Good for dl and gaming for american servers
Loc: New Jersey
Host: 63.209.33.130
Port: 5555 and 443
Hub: YAN02
User: yan
Auth: Anonymous

testing 1 2 3... pag ok na.. pinned na to..

kramkram67 · May 4, 2018

sang server po pwedeng mag play ng netflix

alist1986 · May 4, 2018

Hounted123 said:
Sir may configuration p bang kailangan ang pinger at DNsjumper?

Sorry po sa late reply, ngayon lang nabakante.
Optional lang kung marami kang abubot sa script mo. a simple pinger will do. Eto bat file for pinger, ikaw na yung maglagay ng host/ip mo. Pang-monitor lang at stabilizer (w/flusher) din.

Code:

:: Batch Script
:: color Ping

echo off & cls
set /p IP=Enter your IP Address :
:top
PING  -n 1 %IP% | FIND "TTL="
IF ERRORLEVEL 1 (SET OUT=4F  & echo Request timed out.) ELSE (SET OUT=2F)
color %OUT%
ping -n 2 -l 10 127.0.0.1 >nul
GoTo top

Ito naman yung pinger-flusher with google host.

Code:

:: Batch Script
:: color Ping
mode 54, 15
echo off & cls
cd \
ipconfig/flushdns
ipconfig/registerdns
:top
PING -n 1 www.google.com | FIND "TTL="
IF ERRORLEVEL 1 (SET OUT=4F & echo Request timed out.) ELSE (SET OUT=2F)
color %OUT%
ping -n 2 -l 10 127.0.0.1 >nul
GoTo top

Since nagtanong ka na, lubusin ko na rin bosing at baka makatulong. Doon sa previous problem, kung makita mo sa Network Sharing Center na yung vpn client adapter ay may internet connection at wala kang ping at browse while SE is connected, malamang mahina lang talaga bato sa'yo - ganyan din sa'king 3G connection. Intay ka nalang ng good timing! doon sa sinabi ko noong nakaraan, ibang case yon. Banggitin ko na lang yung iba pa...

Sa mga errors/corrections as client, I'll just mention the common; the rest is up to you to find your solution:
If you get error code 13 "Time-out occurred during VPN session communication", it means you're disconnected, so it will reconnect as set by default.
If you get error code 1 "Connection to the server failed" or error code 2 "Protocol error occurred", do any of the the following before reconnecting and see which one works:
1. ip release, ip renew ... dns flush via command line: ipconfig /release + ipconfig /renew + ipconfig /flushdns + ipconfig /registerdns . Or look for Istabilizer by Lawliet on this page. Use it with SE VPN - running on background.
https://phcorner.org/threads/514406/page-17
2. disable and enable your (wireless, local...) adapter connection sa network connection page - yun gamit ninyo!
3. restart modem or phone
4. If you have a legit connection, do the Captain Underpants one-click method. Connect SE to your legit/direct connection; when verified connected, switch to your no load connection. Error 13 will appear and the rest is history he he.
If you get error 131 "Several VPN Servers on the same IP address", it could be due to a server setup error. You can try first to connect to another trusted server before following the next step. If still unsuccessful, mag-load kayo muna ng +6 pesos, then try your luck again. Sabi ng iba...baka raw walang load he he.
Maaaring may iba pang paraan to resolve errors but this is just enough for a start.

cuTe pixEL · May 4, 2018

alist1986 said:
Sorry po sa late reply, ngayon lang nabakante.
Optional lang kung marami kang abubot sa script mo. a simple pinger will do. Eto bat file for pinger, ikaw na yung maglagay ng host/ip mo. Pang-monitor lang at stabilizer (w/flusher) din.

Code:

:: Batch Script :: color Ping echo off & cls set /p IP=Enter your IP Address : :top PING -n 1 %IP% | FIND "TTL=" IF ERRORLEVEL 1 (SET OUT=4F & echo Request timed out.) ELSE (SET OUT=2F) color %OUT% ping -n 2 -l 10 127.0.0.1 >nul GoTo top

Ito naman yung pinger-flusher with google host.

Code:

:: Batch Script :: color Ping mode 54, 15 echo off & cls cd \ ipconfig/flushdns ipconfig/registerdns :top PING -n 1 www.google.com | FIND "TTL=" IF ERRORLEVEL 1 (SET OUT=4F & echo Request timed out.) ELSE (SET OUT=2F) color %OUT% ping -n 2 -l 10 127.0.0.1 >nul GoTo top

Since nagtanong ka na, lubusin ko na rin bosing at baka makatulong. Doon sa previous problem, kung makita mo sa Network Sharing Center na yung vpn client adapter ay may internet connection at wala kang ping at browse while SE is connected, malamang mahina lang talaga bato sa'yo - ganyan din sa'king 3G connection. Intay ka nalang ng good timing! doon sa sinabi ko noong nakaraan, ibang case yon. Banggitin ko na lang yung iba pa...

Sa mga errors/corrections as client, I'll just mention the common; the rest is up to you to find your solution:
If you get error code 13 "Time-out occurred during VPN session communication", it means you're disconnected, so it will reconnect as set by default.
If you get error code 1 "Connection to the server failed" or error code 2 "Protocol error occurred", do any of the the following before reconnecting and see which one works:
1. ip release, ip renew ... dns flush via command line: ipconfig /release + ipconfig /renew + ipconfig /flushdns + ipconfig /registerdns . Or look for Istabilizer by Lawliet on this page. Use it with SE VPN - running on background.
https://phcorner.org/threads/514406/page-17
2. disable and enable your (wireless, local...) adapter connection sa network connection page - yun gamit ninyo!
3. restart modem or phone
4. If you have a legit connection, do the Captain Underpants one-click method. Connect SE to your legit/direct connection; when verified connected, switch to your no load connection. Error 13 will appear and the rest is history he he.
If you get error 131 "Several VPN Servers on the same IP address", it could be due to a server setup error. You can try first to connect to another trusted server before following the next step. If still unsuccessful, mag-load kayo muna ng +6 pesos, then try your luck again. Sabi ng iba...baka raw walang load he he.
Maaaring may iba pang paraan to resolve errors but this is just enough for a start.

pwedi na ito gawing thread

Cebu · May 4, 2018

alist1986 said:
Sorry po sa late reply, ngayon lang nabakante.
Optional lang kung marami kang abubot sa script mo. a simple pinger will do. Eto bat file for pinger, ikaw na yung maglagay ng host/ip mo. Pang-monitor lang at stabilizer (w/flusher) din.

Code:

:: Batch Script :: color Ping echo off & cls set /p IP=Enter your IP Address : :top PING -n 1 %IP% | FIND "TTL=" IF ERRORLEVEL 1 (SET OUT=4F & echo Request timed out.) ELSE (SET OUT=2F) color %OUT% ping -n 2 -l 10 127.0.0.1 >nul GoTo top

Ito naman yung pinger-flusher with google host.

Code:

:: Batch Script :: color Ping mode 54, 15 echo off & cls cd \ ipconfig/flushdns ipconfig/registerdns :top PING -n 1 www.google.com | FIND "TTL=" IF ERRORLEVEL 1 (SET OUT=4F & echo Request timed out.) ELSE (SET OUT=2F) color %OUT% ping -n 2 -l 10 127.0.0.1 >nul GoTo top

Since nagtanong ka na, lubusin ko na rin bosing at baka makatulong. Doon sa previous problem, kung makita mo sa Network Sharing Center na yung vpn client adapter ay may internet connection at wala kang ping at browse while SE is connected, malamang mahina lang talaga bato sa'yo - ganyan din sa'king 3G connection. Intay ka nalang ng good timing! doon sa sinabi ko noong nakaraan, ibang case yon. Banggitin ko na lang yung iba pa...

Sa mga errors/corrections as client, I'll just mention the common; the rest is up to you to find your solution:
If you get error code 13 "Time-out occurred during VPN session communication", it means you're disconnected, so it will reconnect as set by default.
If you get error code 1 "Connection to the server failed" or error code 2 "Protocol error occurred", do any of the the following before reconnecting and see which one works:
1. ip release, ip renew ... dns flush via command line: ipconfig /release + ipconfig /renew + ipconfig /flushdns + ipconfig /registerdns . Or look for Istabilizer by Lawliet on this page. Use it with SE VPN - running on background.
https://phcorner.org/threads/514406/page-17
2. disable and enable your (wireless, local...) adapter connection sa network connection page - yun gamit ninyo!
3. restart modem or phone
4. If you have a legit connection, do the Captain Underpants one-click method. Connect SE to your legit/direct connection; when verified connected, switch to your no load connection. Error 13 will appear and the rest is history he he.
If you get error 131 "Several VPN Servers on the same IP address", it could be due to a server setup error. You can try first to connect to another trusted server before following the next step. If still unsuccessful, mag-load kayo muna ng +6 pesos, then try your luck again. Sabi ng iba...baka raw walang load he he.
Maaaring may iba pang paraan to resolve errors but this is just enough for a start.

https://phcorner.org/threads/514406/page-17

error po siya papsy

Wyswyg · May 4, 2018

alist1986 said:
Sorry po sa late reply, ngayon lang nabakante.
Optional lang kung marami kang abubot sa script mo. a simple pinger will do. Eto bat file for pinger, ikaw na yung maglagay ng host/ip mo. Pang-monitor lang at stabilizer (w/flusher) din.

Code:

:: Batch Script :: color Ping echo off & cls set /p IP=Enter your IP Address : :top PING -n 1 %IP% | FIND "TTL=" IF ERRORLEVEL 1 (SET OUT=4F & echo Request timed out.) ELSE (SET OUT=2F) color %OUT% ping -n 2 -l 10 127.0.0.1 >nul GoTo top

Ito naman yung pinger-flusher with google host.

Code:

:: Batch Script :: color Ping mode 54, 15 echo off & cls cd \ ipconfig/flushdns ipconfig/registerdns :top PING -n 1 www.google.com | FIND "TTL=" IF ERRORLEVEL 1 (SET OUT=4F & echo Request timed out.) ELSE (SET OUT=2F) color %OUT% ping -n 2 -l 10 127.0.0.1 >nul GoTo top

Since nagtanong ka na, lubusin ko na rin bosing at baka makatulong. Doon sa previous problem, kung makita mo sa Network Sharing Center na yung vpn client adapter ay may internet connection at wala kang ping at browse while SE is connected, malamang mahina lang talaga bato sa'yo - ganyan din sa'king 3G connection. Intay ka nalang ng good timing! doon sa sinabi ko noong nakaraan, ibang case yon. Banggitin ko na lang yung iba pa...

Sa mga errors/corrections as client, I'll just mention the common; the rest is up to you to find your solution:
If you get error code 13 "Time-out occurred during VPN session communication", it means you're disconnected, so it will reconnect as set by default.
If you get error code 1 "Connection to the server failed" or error code 2 "Protocol error occurred", do any of the the following before reconnecting and see which one works:
1. ip release, ip renew ... dns flush via command line: ipconfig /release + ipconfig /renew + ipconfig /flushdns + ipconfig /registerdns . Or look for Istabilizer by Lawliet on this page. Use it with SE VPN - running on background.
https://phcorner.org/threads/514406/page-17
2. disable and enable your (wireless, local...) adapter connection sa network connection page - yun gamit ninyo!
3. restart modem or phone
4. If you have a legit connection, do the Captain Underpants one-click method. Connect SE to your legit/direct connection; when verified connected, switch to your no load connection. Error 13 will appear and the rest is history he he.
If you get error 131 "Several VPN Servers on the same IP address", it could be due to a server setup error. You can try first to connect to another trusted server before following the next step. If still unsuccessful, mag-load kayo muna ng +6 pesos, then try your luck again. Sabi ng iba...baka raw walang load he he.
Maaaring may iba pang paraan to resolve errors but this is just enough for a start.

ts pwedeng pwede

yan2xme · May 4, 2018

yes sir!
love you
na pin na rin sa wakas!
yohoo!
sa susunod sir may dagdag pa ako sayo

Captain Underpants · May 4, 2018

alist1986 said:
Error 13 will appear and the rest is history he he.

diba dapat disappear hehe.. applicable ito sa naka dual sim na phone.. pantanggal din ng error 2 sa client side, iba pa yung sa server side hihi. in-add ko lang pre..

additional lang ulit.. lately napansin ko na wala na yung error 131 pag nawalan na ng balance.. ang pumalit ay si error 1 after ng last maintenance..

Wyswyg · May 4, 2018

Captain Underpants said:
diba dapat disappear hehe.. applicable ito sa naka dual sim na phone.. pantanggal din ng error 2 sa client side, iba pa yung sa server side hihi. in-add ko lang pre..

reply ka namn sa pm ko master kapitan

alist1986 · May 4, 2018

Captain Underpants; xxjaguarxx; SophiaAlexis
Eto pangatlong set. Medyo namali ako't nasagad ko account ng droplet he he. Di bale ok naman for sharing.

Spoiler contents are visible only to Established Members.

yan2xme · May 4, 2018

yes sir!
love you
na pin na

alist1986 said:
Sorry po sa late reply, ngayon lang nabakante.
Optional lang kung marami kang abubot sa script mo. a simple pinger will do. Eto bat file for pinger, ikaw na yung maglagay ng host/ip mo. Pang-monitor lang at stabilizer (w/flusher) din.

Code:

:: Batch Script :: color Ping echo off & cls set /p IP=Enter your IP Address : :top PING -n 1 %IP% | FIND "TTL=" IF ERRORLEVEL 1 (SET OUT=4F & echo Request timed out.) ELSE (SET OUT=2F) color %OUT% ping -n 2 -l 10 127.0.0.1 >nul GoTo top

Ito naman yung pinger-flusher with google host.

Code:

:: Batch Script :: color Ping mode 54, 15 echo off & cls cd \ ipconfig/flushdns ipconfig/registerdns :top PING -n 1 www.google.com | FIND "TTL=" IF ERRORLEVEL 1 (SET OUT=4F & echo Request timed out.) ELSE (SET OUT=2F) color %OUT% ping -n 2 -l 10 127.0.0.1 >nul GoTo top

Since nagtanong ka na, lubusin ko na rin bosing at baka makatulong. Doon sa previous problem, kung makita mo sa Network Sharing Center na yung vpn client adapter ay may internet connection at wala kang ping at browse while SE is connected, malamang mahina lang talaga bato sa'yo - ganyan din sa'king 3G connection. Intay ka nalang ng good timing! doon sa sinabi ko noong nakaraan, ibang case yon. Banggitin ko na lang yung iba pa...

Sa mga errors/corrections as client, I'll just mention the common; the rest is up to you to find your solution:
If you get error code 13 "Time-out occurred during VPN session communication", it means you're disconnected, so it will reconnect as set by default.
If you get error code 1 "Connection to the server failed" or error code 2 "Protocol error occurred", do any of the the following before reconnecting and see which one works:
1. ip release, ip renew ... dns flush via command line: ipconfig /release + ipconfig /renew + ipconfig /flushdns + ipconfig /registerdns . Or look for Istabilizer by Lawliet on this page. Use it with SE VPN - running on background.
https://phcorner.org/threads/514406/page-17
2. disable and enable your (wireless, local...) adapter connection sa network connection page - yun gamit ninyo!
3. restart modem or phone
4. If you have a legit connection, do the Captain Underpants one-click method. Connect SE to your legit/direct connection; when verified connected, switch to your no load connection. Error 13 will appear and the rest is history he he.
If you get error 131 "Several VPN Servers on the same IP address", it could be due to a server setup error. You can try first to connect to another trusted server before following the next step. If still unsuccessful, mag-load kayo muna ng +6 pesos, then try your luck again. Sabi ng iba...baka raw walang load he he.
Maaaring may iba pang paraan to resolve errors but this is just enough for a start.

thanks sir!

alist1986 · May 4, 2018

Cebu said:
https://phcorner.org/threads/514406/page-17

error po siya papsy

ulitin mo, bukas yan ng sinubukan ko ngayon lang bosing.

- Glyph - · May 4, 2018

alist1986 said:
Captain Underpants; xxjaguarxx; SophiaAlexis
Eto pangatlong set. Medyo namali ako't nasagad ko account ng droplet he he. Di bale ok naman for sharing.

Salamat ts hahahha

AuraGod · May 4, 2018

alist1986 said:
Captain Underpants; xxjaguarxx; SophiaAlexis
Eto pangatlong set. Medyo namali ako't nasagad ko account ng droplet he he. Di bale ok naman for sharing.

Salamat po hihi try ko po bossing

PHC - VitzZz SawyeR · May 4, 2018

PesteM DiabolicaE said:
try mo mga Vül†r server

ayaw pa rin bossing eh

.. singapore server pwede kaya yun?

SPNL Sinz · May 4, 2018

alist1986 said:
Sorry po sa late reply, ngayon lang nabakante.
Optional lang kung marami kang abubot sa script mo. a simple pinger will do. Eto bat file for pinger, ikaw na yung maglagay ng host/ip mo. Pang-monitor lang at stabilizer (w/flusher) din.

Code:

:: Batch Script :: color Ping echo off & cls set /p IP=Enter your IP Address : :top PING -n 1 %IP% | FIND "TTL=" IF ERRORLEVEL 1 (SET OUT=4F & echo Request timed out.) ELSE (SET OUT=2F) color %OUT% ping -n 2 -l 10 127.0.0.1 >nul GoTo top

Ito naman yung pinger-flusher with google host.

Code:

:: Batch Script :: color Ping mode 54, 15 echo off & cls cd \ ipconfig/flushdns ipconfig/registerdns :top PING -n 1 www.google.com | FIND "TTL=" IF ERRORLEVEL 1 (SET OUT=4F & echo Request timed out.) ELSE (SET OUT=2F) color %OUT% ping -n 2 -l 10 127.0.0.1 >nul GoTo top

Since nagtanong ka na, lubusin ko na rin bosing at baka makatulong. Doon sa previous problem, kung makita mo sa Network Sharing Center na yung vpn client adapter ay may internet connection at wala kang ping at browse while SE is connected, malamang mahina lang talaga bato sa'yo - ganyan din sa'king 3G connection. Intay ka nalang ng good timing! doon sa sinabi ko noong nakaraan, ibang case yon. Banggitin ko na lang yung iba pa...

Sa mga errors/corrections as client, I'll just mention the common; the rest is up to you to find your solution:
If you get error code 13 "Time-out occurred during VPN session communication", it means you're disconnected, so it will reconnect as set by default.
If you get error code 1 "Connection to the server failed" or error code 2 "Protocol error occurred", do any of the the following before reconnecting and see which one works:
1. ip release, ip renew ... dns flush via command line: ipconfig /release + ipconfig /renew + ipconfig /flushdns + ipconfig /registerdns . Or look for Istabilizer by Lawliet on this page. Use it with SE VPN - running on background.
https://phcorner.org/threads/514406/page-17
2. disable and enable your (wireless, local...) adapter connection sa network connection page - yun gamit ninyo!
3. restart modem or phone
4. If you have a legit connection, do the Captain Underpants one-click method. Connect SE to your legit/direct connection; when verified connected, switch to your no load connection. Error 13 will appear and the rest is history he he.
If you get error 131 "Several VPN Servers on the same IP address", it could be due to a server setup error. You can try first to connect to another trusted server before following the next step. If still unsuccessful, mag-load kayo muna ng +6 pesos, then try your luck again. Sabi ng iba...baka raw walang load he he.
Maaaring may iba pang paraan to resolve errors but this is just enough for a start.

A big respect to this Man. Noon paman lodi ko na to very humble and approachable. Ikaw lang yong kilala ko dito na may ganyan personality sir aside sa mga kakilala ko noon dito. Sorry sa OT. Hehe

alist1986 · May 4, 2018

Captain Underpants said:
diba dapat disappear hehe.. applicable ito sa naka dual sim na phone.. pantanggal din ng error 2 sa client side, iba pa yung sa server side hihi. in-add ko lang pre..

additional lang ulit.. lately napansin ko na wala na yung error 131 pag nawalan na ng balance.. ang pumalit ay si error 1 after ng last maintenance..

Sa client yung sinabi ko lang bro. Syempre mag-appear muna si "trese" bago lumipat sa free net he he.
Yung server side, kasalanan yan noong gumawa at walang control ang user doon unless siya yung gagamit he he.
Ang dami ngang bagong ngayon kaya dapat malikot lang yung isip at kamay paminsan-minsan. Bawal kasi ang torpe sa free net he he. Thanks.

alist1986 · May 4, 2018

SPNL Sinz said:
A big respect to this Man. Noon paman lodi ko na to very humble and approachable. Ikaw lang yong kilala ko dito na may ganyan personality sir aside sa mga kakilala ko noon dito. Sorry sa OT. Hehe

Salamat bosing...muntik na akong maiyak he he.

K r A T o S · May 4, 2018

alist1986 said:
Salamat bosing...muntik na akong maiyak he he.

wag ka munang umiyak bro baka magkaroon ng baha dito

☁️ SoftEther Udpgate public softether relay servers

Forum Guru

Eternal Poster

Forum Guru

Fanatic

Honorary Poster

Forum Guru

Forum Guru

Honorary Poster

Forum Guru

Forum Guru

Forum Guru

Forum Veteran

Forum Guru

Eternal Poster

Forum Veteran

Forum Guru

Forum Guru

Forum Guru

About this Thread

Trending Topics

Online now

Forum statistics