🔒 Closed B593s-931 modem po. need help po.

[Babykulit04]

Modem ko Hindi gumana WLAN niya.Hindi ako sigurado sa tawag niyan.Pero may image ako para maktulong kayo sakin. Salamat po sapag pansin . nito .Appreciate ko po mga boss

 

[PesteM DiabolicaE]

baka naman na disable mo.. check mo button

 

[Babykulit04]

Ang problema ko po. AY yang pangalawang Sign sa modem..Hindi siya nag tuturn on..

 

[TresMarias]

blinking ba yan "TEL" sign ?

 

[PesteM DiabolicaE]

parang brick sir.. nakailaw yung telephone eh.. try mo iflash

 

[aiken jhay]

Try mo sir ireset ulet.... Pag ganun p din try to brick n

 

[Babykulit04]

Di parin po ..
di sya parin mag blue light.

 

[TresMarias]

malamang 931 nov yan, wrong flash or nasa equipment mode sya

 

[Babykulit04]

paano po iflash sir?

 

[TresMarias]

try mo kung makaka pasok sa telnet

set manual IP ng LAN Network mo

192.168.1.1

then try mo if papasok sa telnet

 

[Babykulit04]

di parin boss

 

[PesteM DiabolicaE]

malamang 931 nov yan, wrong flash or nasa equipment mode sya

tama ka sir

 

[PesteM DiabolicaE]

Before we begin...set your lan to static...192.168.1.2,then its default subnet mask

do the telnet command...telnet 192.168.1.1...enter

BusyBox vv1.9.1 (2014-11-03 0901 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

# lteat

First confirm, that it is in the equipment mode:

AAT^nvrd=52110
^@
^NVRD: 12,31 00 00 00 00 00 00 00 00 00 00 00


To change equipment mode back to normal

AAT^nvwr=52110,1,0

To confirm if its rewrited

AAT^nvrd=52110

^NVRD: 12,00 00 00 00 00 00 00 00 00 00 00 00

restart your modem...back to its default ip...hope it helps


credit goes who started AT commands...you know who are they...thanks to them....its up to you guys to continue what has begun

Some discovered AT cmd`s for B593s-931(standby for further additional usefull AT cmd)

AAT^CARDLOCK?=(3,0,0 for the result w/c is a permanent lock)i have tried all possible at cmd`s for unlocking,
(AAT^CARDLOCK="xxxxxxxx",AAT^CARDUNLOCK="hash reset counter",AAT^SIMLOCK,AAT^SIMUNLOCK,
AAT^DATALOCK,AAT^DATAUNLOCK....etc..etc)still no luck...but...there`s still a way,nvram id for the cardlock.
Like equipment mode to normal operation wc is located at 52110(like what i`ve posted above)or maybe it is in
52111,or in 8250.A long way to start from 0-65535(nvram read,AAT^NVRD=?)those who are interested for the
discovery....pls feel free to post......ty

AAT^WUUSER?=admin username
AAT^WUPWD?=admin password
AAT^NVRD=?
AAT^NVWR=?

 

[TresMarias]

di parin boss

dapat ganyan ang setting then try mo e-telnet, if ayaw pa rin, hard brick na yan kailangan na ng fullflashing

 

[PesteM DiabolicaE]

nov firmware yan.. semi brick na yan. try mo yung pinost ko

 

[Babykulit04]

pano po yan gawin sir? Newbie po kase ako..Di ko kabisado mga ganyan. Bossing

 

[PesteM DiabolicaE]

pano po yan gawin sir? Newbie po kase ako..Di ko kabisado mga ganyan. Bossing

yan na nga po ang procedure

 

[Babykulit04]

Thank tou po boss

 

[Babykulit04]

I cant Understand it sir.

 

[Babykulit04]

di talaga ako marunong nito.. HAYY.. nakaka lungkot nman