🔒 Closed Flash intallation failed

[jaeBen]

Mga sir pahelp naman po kasi pag nag flash ako ng firmware sa oppo ko na na bootlop nag failed po sya..
Pag nag flash naman po ako using sp flash tool ayaw pa rin gumana still on the logo pa rin po.. thanks in advance po.

BTW: oppo r831k neo 3 po unit ko.

 

[Koharu]

Baka po corrupted yung file? Try to redownload yung firmware

 

[Shinsuke Nishizono]

Anong error kapag nagflash ng firmware?

 

[jasdah]

Successful po yung flashing pero until logo lng pag open o unsuccessful?

 

[jaeBen]

Tama logo lang po ang lumalabas.

 

[jaeBen]

Anong error kapag nagflash ng firmware?

Oo using sd card nangalahati naman ung operation pero after mag installation failed na

 

[Wrecky16]

try another firmware o kaya kung spflash gamit mo format + download ang gawin mo wag download only para mabura yung mga unwanted files na napapacorrupt ng cellphone mo! try mo rin scanned kung me virus!

 

[Wrecky16]

try another firmware o kaya kung spflash gamit mo format + download ang gawin mo wag download only para mabura yung mga unwanted files na napapacorrupt ng cellphone mo! try mo rin scanned kung me virus!

 

[jaeBen]

try another firmware o kaya kung spflash gamit mo format + download ang gawin mo wag download only para mabura yung mga unwanted files na napapacorrupt ng cellphone mo! try mo rin scanned kung me virus![/QU
Ganon nga po. Format + download. San po ung scanned

 

[jasdah]

Tama logo lang po ang lumalabas.

Try mo i download yung exact firmware at right location country ng unit mo e update mo din yung usb drivers mo then dapat tama yung mga commands sa sp flashtool before mo i run ang procedure

 

[Shinsuke Nishizono]

Oo using sd card nangalahati naman ung operation pero after mag installation failed na

Try mo mang advanced mode sa SP Flash Tool using by this shortcut CTRL+ALT+T .

 

[jaeBen]

Try mo mang advanced mode sa SP Flash Tool using by this shortcut CTRL+ALT+T .

Salamat subukan ko

 

[jaeBen]

Try mo i download yung exact firmware at right location country ng unit mo e update mo din yung usb drivers mo then dapat tama yung mga commands sa sp flashtool before mo i run ang procedure

Pano sya hanapin boss if this is rigth country.

 

[Shinsuke Nishizono]

Salamat subukan ko

Forget ko pala , try mo magformat sa format section.

check mo format except bootloader. Tapos start mo.

Kung nagfailed sira na ng emmc nyan sir.

 

[jasdah]

Pano sya hanapin boss if this is rigth country.

Ang firmware po kasi may specifications yan depende sa model at saang bansa nka sell halimbawa yung pinaflash mo now is release within china tpos yung unit mo here from philippines di mo tlga ma flash yan due to kernel issue uncompatible sa hardware specs kaya maghanap k ng firmware exactly else ung universal like all country supported na firmware ng unit mo

 

[jasdah]

jaeBen

You do not have permission to view the full content of this post. Log in or register now.

 

[jaeBen]

Ang firmware po kasi may specifications yan depende sa model at saang bansa nka sell halimbawa yung pinaflash mo now is release within china tpos yung unit mo here from philippines di mo tlga ma flash yan due to kernel issue uncompatible sa hardware specs kaya maghanap k ng firmware exactly else ung universal like all country supported na firmware ng unit mo

I see.. salamat.

 

[jasdah]

Your welcome po

 

[Wrecky16]

Internal RAM:

External RAM:

Type = DRAM

Size = 0x40000000 (1024MB/8192Mb)

NAND Flash:


ERROR: NAND Flash was not detected!



EMMC:



EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)

EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)

EMMC_PART_RPMB Size = 0x0000000000400000(4MB)

EMMC_PART_GP1 Size = 0x0000000000000000(0MB)

EMMC_PART_GP2 Size = 0x0000000000000000(0MB)

EMMC_PART_GP3 Size = 0x0000000000000000(0MB)

EMMC_PART_GP4 Size = 0x0000000000000000(0MB)

EMMC_PART_USER Size = 0x00000001d2000000(7456MB)



============ EMMC Test ============



EMMC Pattern Test(0x5A5A):



boss paano pag ganyan palit nand flash na ba yan? nag kavirus kasi kata f1s kahit anong sp flash ko ayaw mabuhay kahit sa miracle box!

 

[jasdah]

Internal RAM:

External RAM:

Type = DRAM

Size = 0x40000000 (1024MB/8192Mb)

NAND Flash:


ERROR: NAND Flash was not detected!



EMMC:



EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)

EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)

EMMC_PART_RPMB Size = 0x0000000000400000(4MB)

EMMC_PART_GP1 Size = 0x0000000000000000(0MB)

EMMC_PART_GP2 Size = 0x0000000000000000(0MB)

EMMC_PART_GP3 Size = 0x0000000000000000(0MB)

EMMC_PART_GP4 Size = 0x0000000000000000(0MB)

EMMC_PART_USER Size = 0x00000001d2000000(7456MB)



============ EMMC Test ============



EMMC Pattern Test(0x5A5A):



boss paano pag ganyan palit nand flash na ba yan? nag kavirus kasi kata f1s kahit anong sp flash ko ayaw mabuhay kahit sa miracle box!

di naman yan mag error tatlo lng kasi dapat nka press buttons kay sp during flashing
flash download at upgrade

Basta tama ung mediatek usb drivers na nkainstall sa Pc mo