🔒 Closed Reprogram android phone/s

[madj2x19]

Hi po sa lahat pahelp po sana, kailngan ko po i-reprogram yung android phone ko.. sino po nakakaalam ng kung pano gawin. phone details: CB Flare J1 " meron lumalabas na "Unfortunately the process com.android.phone has stopped." . . . kung meron po nakakaalam please help! thanks

 

[K1LLER EYE]

try mo po factory reset or hard reset

 

[madj2x19]

try mo po factory reset or hard reset

Natry ko na paps, maghard reset pero ganun pa rin. parang corrupted ung OS.

 

[calypso]

You do not have permission to view the full content of this post. Log in or register now.

Lollipo yan.. ano current os mo?

Drivers :

You do not have permission to view the full content of this post. Log in or register now.

Flash tool :


You do not have permission to view the full content of this post. Log in or register now.


PROCEDURE :

Flash Pac file Stock Rom

Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
NOTE: UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.
Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset. you can search a procedure in google.

 

[Slappy111]

kaya pa ng fac reset yan

 

[madj2x19]

You do not have permission to view the full content of this post. Log in or register now.

Lollipo yan.. ano current os mo?

Drivers :

You do not have permission to view the full content of this post. Log in or register now.

Flash tool :


You do not have permission to view the full content of this post. Log in or register now.


PROCEDURE :

Flash Pac file Stock Rom

Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
NOTE: UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.
Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset. you can search a procedure in google.

Salamat po dito sa tools at info, Try ko po gawin..

 

[calypso]

Salamat po dito sa tools at info, Try ko po gawin..

Ano current os mo?

 

[madj2x19]

Ano current os mo?

Lollipop sir, Itinry ko na kaso ayaw gumana nun press volume and and down then connect the cable.. walang nagyayari. Panu kaya yun?

 

[calypso]

Lollipop sir, Itinry ko na kaso ayaw gumana nun press volume and and down then connect the cable.. walang nagyayari. Panu kaya yun?

Install mu lahat?


Dapat walang batt during e plug mo cp to pc
Click dapat start button before plug

 

[madj2x19]

Install mu lahat?


Dapat walang batt during e plug mo cp to pc
Click dapat start button before plug

Nagkakaroon ng error s driver installation failed.. gumagamit ako windows 10, compatible b?

 

[calypso]

Nagkakaroon ng error s driver installation failed.. gumagamit ako windows 10, compatible b?

Disable mu driver signature? Paano? E youtube mo.. madali lang