PHKrizza Babies
Contributor
please insert pa din
-
Welcome to PHCorner Forums! Sign up for free to unlock full access and exclusive privileges, including:
- Asking questions about computer and mobile issues
- Discovering internet tips for your mobile network and computer
❓ Help Help me ssd and hard disk na read sa bios pero kpag excute na ayaw
- Thread starter Krizza Babies
- Start date
Solution
Krizza Babies
Contributor
Panu mag install minsan di binabasa yung ssd pati hdd tapos kpag nag install ako os wlang nababasa na drive kaya di makatuloy
Krizza Babies
Contributor
minsan po ayaw basahin talaga
laptop or Desktop ? saan ka ba mag install ng OS
Pag laptop kasi need mo hanapin yung Driver na Compatible sa Model ng Laptop mo .
ganto yung gagawin mo . pero need mo lang mahanap yung driver na Compatible sayo
To install an operating system (OS) on an SSD using Intel Rapid Storage Technology (Intel RST), you’ll need to load the Intel RST driver during OS installation so the installer can recognize the SSD—especially when the BIOS is set to RAID mode.
WHEN IS INTEL RST DRIVER NEEDED?
You’ll need the Intel RST driver during OS installation if:
- Your BIOS SATA mode is set to RAID (not AHCI).
- You're using a RAID array of SSDs or HDDs.
- The Windows installer cannot detect your SSD even though it’s properly connected.
STEP-BY-STEP: Installing OS with Intel RST Driver
- Restart and enter BIOS/UEFI (commonly F2, DEL, or ESC).
- Set SATA Mode to RAID.
- Save and exit.
- Go to your motherboard or laptop manufacturer's website (preferred).
- Or get from Intel:
Intel RST F6 Driver Download (Latest) - Extract the ZIP and copy the driver folder to a USB flash drive.
- Plug in the USB with the RST driver.
- Boot from your Windows installer (USB/DVD).
- On the “Where do you want to install Windows?” screen, you may not see any drives.
- Click “Load driver”.
- Browse to your USB > locate the folder with RST driver.
- Select the correct driver version for your system (e.g. x64 for 64-bit).
- Once loaded, your SSD should now appear.
- Select the SSD or RAID volume.
- Format if needed, then install Windows as usual.
OPTIONAL: Install Full Intel RST Software After Setup
Once Windows is installed:
- Download and install full Intel RST software (not just driver) from your OEM or Intel's website.
Krizza Babies
Contributor
desktoplaptop or Desktop ? saan ka ba mag install ng OS
Pag laptop kasi need mo hanapin yung Driver na Compatible sa Model ng Laptop mo .
ganto yung gagawin mo . pero need mo lang mahanap yung driver na Compatible sayo
To install an operating system (OS) on an SSD using Intel Rapid Storage Technology (Intel RST), you’ll need to load the Intel RST driver during OS installation so the installer can recognize the SSD—especially when the BIOS is set to RAID mode.
You’ll need the Intel RST driver during OS installation if:
- Your BIOS SATA mode is set to RAID (not AHCI).
- You're using a RAID array of SSDs or HDDs.
- The Windows installer cannot detect your SSD even though it’s properly connected.
- Restart and enter BIOS/UEFI (commonly F2, DEL, or ESC).
- Set SATA Mode to RAID.
- Save and exit.
- Go to your motherboard or laptop manufacturer's website (preferred).
- Or get from Intel:
- Extract the ZIP and copy the driver folder to a USB flash drive.
- Plug in the USB with the RST driver.
- Boot from your Windows installer (USB/DVD).
- On the “Where do you want to install Windows?” screen, you may not see any drives.
- Click “Load driver”.
- Browse to your USB > locate the folder with RST driver.
- Select the correct driver version for your system (e.g. x64 for 64-bit).
- Once loaded, your SSD should now appear.
- Select the SSD or RAID volume.
- Format if needed, then install Windows as usual.
Once Windows is installed:
- Download and install full Intel RST software (not just driver) from your OEM or Intel's website.
PHC_LaCe12
Forum Master
PHC_LaCe12
Forum Master
ahh di parin na sulotion? baka pwede tayo mag pm tol
- Status