What's new
By:

❓ Help Converge 300mbps on main router, 100mbps capped on LAN cable connected router/repeater

N

Nokubi Nana

Elite
Meron ba dito same na naka experience na nag cacapping yung speed ng wifi extender router gamit lan cable? sa akin kasi pag unang saksak pa lang yung repeater, 300mbps pa naman, pero after few minutes mag cacap na siya sa 100mbps, na try ko na yung mga solutions na magpalit ng bagong lan cable, ilipat lipat ng port yung cable, saka naka unlimited naman yung speed settings sa admin, ganun pa din talaga. Pero sa main router, 300mbps pa din ang speed.
 
Sort by date Sort by votes
IkaMusume said:
Same issue dito, kahit anong cable (Cat5, or Cat6) or router gamitin ko same parin ang speed ng router as extender. nasa 100mbps lang
Click to expand...
Hindi kaya parang FUP (Fair Use Policy) ni Converge yun? na only 1 router can broadcast maximum speed, then if gumamit ng 2nd router (for extender) is naka limit na sa 100mbps, hahaha.

Ma try nga i turn off yung Wifi ng main router, may option kasi na pwede patayin yung router ng main, mag aact nalang siya as modem, if may effect siya.
 
Upvote 0 Downvote
MinervaLux said:
Hindi kaya parang FUP (Fair Use Policy) ni Converge yun? na only 1 router can broadcast maximum speed, then if gumamit ng 2nd router (for extender) is naka limit na sa 100mbps, hahaha.

Ma try nga i turn off yung Wifi ng main router, may option kasi na pwede patayin yung router ng main, mag aact nalang siya as modem, if may effect siya.
Click to expand...
Tatlong extender ang nilagay ko, silang lahat 100mbps -- iba ibang model ng routers. may tplink, huawei, at 'yung old pldt router. Old or New routers walang pinagkaiba ang speed.

May nabasa naman ako sa LTT forums na need daw iconfigure ang LAN Cable RJ45 about sa mga color codings and chuchu, walang documentation if proven ba 'yun or hindi, may isang forum naman nagsasabi most likely 10/100 lang sagad ng isang ethernet port
 
Upvote 0 Downvote
MinervaLux said:
AC23/AC2100, same model lang siya na CN version.
Click to expand...

nakita ko 'yung manual. nothing obvious. mukhang na-try mo na lahat ng pwedeng subukan.
ganito rin 'yung nasa manual in AP mode:
1740647644666.webp


me paraan ba sa tenda (maski dun sa main router moe) na malaman kung anong speed nag-negotiate 'yung interconnected Ethernet ports nila? just to check kung anong speed nagkaunawaan 'yung dalawang router.

di kasi readily available dito ang Tenda, or i would try to get my hands on one just to check. di ko alam kung gaano ka-reliable 'yung auto-neg (at this point) ng Tenda.

i would ask you to check na hindi nag-ooverlap 'yung wifi channels ng main at piggy-back router, pero you report the same behaviour maski connected by cable 'yung client sa tenda.

baka me mahihiraman ka ng ibang router just to test...
 
Upvote 0 Downvote
nitro7 said:
nakita ko 'yung manual. nothing obvious. mukhang na-try mo na lahat ng pwedeng subukan.
ganito rin 'yung nasa manual in AP mode:
View attachment 3564830

me paraan ba sa tenda (maski dun sa main router moe) na malaman kung anong speed nag-negotiate 'yung interconnected Ethernet ports nila? just to check kung anong speed nagkaunawaan 'yung dalawang router.

di kasi readily available dito ang Tenda, or i would try to get my hands on one just to check. di ko alam kung gaano ka-reliable 'yung auto-neg (at this point) ng Tenda.

i would ask you to check na hindi nag-ooverlap 'yung wifi channels ng main at piggy-back router, pero you report the same behaviour maski connected by cable 'yung client sa tenda.

baka me mahihiraman ka ng ibang router just to test...
Click to expand...
sa main router wala, sa tenda naka set naman lahat ng ports into unlimited speed (which is 300mbps max sa 2.4, and 1700mbps sa 5ghz.

Tried resetting to factory reset yung main modem/router kahapon, ganon pa din haha, last resort nalang siguro for troubleshoot is mag try ng ibang router as extender, baka yung sa akin na talaga may problema.
 
Upvote 0 Downvote
kung malapit ka lang (o mas tama yatang kung malapit lang ako 😁), meron akong mga commercial-grade access point (aruba/ruckus/ubiquiti) na pwede mo sanang subukan. hehehe
 
Upvote 0 Downvote
Update ko lang, bumili ako gigabit cat6 cable vention ang tatak para branded but same result -- 100mbps parin, anyways i'm using EG8145V59 router (default converge router and based sa specs kaya niya 10mbps to 1000mbps sa ethernet ports) with 325mbps bandwidth speed. sinubukan ko 4 routers/ap so if modem lang ni converge ang problem or mga routers(extenders)

1. Tl-WR840N - 300mbps advertised speed pero 100mbps parin ang max
2. Evoluzn FX-ID7 - 100mbps lang talga max based sa specs
3. TL-WA855RE - 300mbps advertised speed pero 100mbps parin ang max
4. MW301R - 300mbps advertised speed pero 100mbps parin ang max


consistent result so parang si EG8145V59 ang problem.
 
Upvote 0 Downvote
IkaMusume said:
Update ko lang, bumili ako gigabit cat6 cable vention ang tatak para branded but same result -- 100mbps parin, anyways i'm using EG8145V59 router (default converge router and based sa specs kaya niya 10mbps to 1000mbps sa ethernet ports) with 325mbps bandwidth speed. sinubukan ko 4 routers/ap so if modem lang ni converge ang problem or mga routers(extenders)

1. Tl-WR840N - 300mbps advertised speed pero 100mbps parin ang max
2. Evoluzn FX-ID7 - 100mbps lang talga max based sa specs
3. TL-WA855RE - 300mbps advertised speed pero 100mbps parin ang max
4. MW301R - 300mbps advertised speed pero 100mbps parin ang max


consistent result so parang si EG8145V59 ang problem.
Click to expand...
wala kabang laptop na may lan port? dapat isang araw lang na kita ang problema yan pramis may duda ako sa tenda talaga na basura yan
 
Upvote 0 Downvote
PHC_LaCe12 said:
wala kabang laptop na may lan port? dapat isang araw lang na kita ang problema yan pramis may duda ako sa tenda talaga na basura yan
Click to expand...
Kapag naka connect sa laptop or pc ang lan cable full blast ang internet while kapag connected namana sa mga modem/router/ap 100mbps lang ang kaya nilang ibuga

for reference eto naka pc ako
1741006747835.webp
 
Upvote 0 Downvote
IkaMusume said:
Update ko lang, bumili ako gigabit cat6 cable vention ang tatak para branded but same result -- 100mbps parin, anyways i'm using EG8145V59 router (default converge router and based sa specs kaya niya 10mbps to 1000mbps sa ethernet ports) with 325mbps bandwidth speed. sinubukan ko 4 routers/ap so if modem lang ni converge ang problem or mga routers(extenders)

1. Tl-WR840N - 300mbps advertised speed pero 100mbps parin ang max
2. Evoluzn FX-ID7 - 100mbps lang talga max based sa specs
3. TL-WA855RE - 300mbps advertised speed pero 100mbps parin ang max
4. MW301R - 300mbps advertised speed pero 100mbps parin ang max


consistent result so parang si EG8145V59 ang problem.
Click to expand...

wired will always be more stable than wifi. pero linawin lang natin... sa mga nabanggit mong router, ang tatlo (TI-WR840N, TL-WA855RE at MW301R) ay meron lamang Fast Ethernet ports (100 Mbps) for uplink. maski pa sabihin natin na 100% efficiency 'yung wifi part nila, ang koneksyon patungo sa internet o main router ay hanggang 100 Mbps lang. ito ang magiging bottle neck pag sinubukan mong mag-speedtest.

question lang sa Evoluzn FX-ID7... 100 Mbps? mukhang iba 'yun FX-ID7 ng pldt kesa dito sa You do not have permission to view the full content of this post. Log in or register now. na ito. pero kung 100 Mbps ang spec nung pldt version, eh di talaga maaasahang lumampas ito.

IkaMusume said:
Kapag naka connect sa laptop or pc ang lan cable full blast ang internet while kapag connected namana sa mga modem/router/ap 100mbps lang ang kaya nilang ibuga

for reference eto naka pc ako
View attachment 3575286
Click to expand...

true. particularly for most consumer grade routers and access points that are currently in use. however, technology now exists to give us better wifi connections. obviously, it needs to be supported by both access point (or wifi router) and the device connecting. of course, devices with newer tech (802.11AX, 802.11BE) cost a fair bit more than the current mainstream ones.

having a gigabit connection, i get 940+ Mbps down / 500+ Mbps up from a wired connection. this one's from my S24U in my living room connecting to my access point ceiling-mounted in the hallway:

1741033387050.webp


btw, kita public IP address mo dito. some people might interpret that as an invite for a DoS attack.
 
Upvote 0 Downvote
IkaMusume said:
Update ko lang, bumili ako gigabit cat6 cable vention ang tatak para branded but same result -- 100mbps parin, anyways i'm using EG8145V59 router (default converge router and based sa specs kaya niya 10mbps to 1000mbps sa ethernet ports) with 325mbps bandwidth speed. sinubukan ko 4 routers/ap so if modem lang ni converge ang problem or mga routers(extenders)

1. Tl-WR840N - 300mbps advertised speed pero 100mbps parin ang max
2. Evoluzn FX-ID7 - 100mbps lang talga max based sa specs
3. TL-WA855RE - 300mbps advertised speed pero 100mbps parin ang max
4. MW301R - 300mbps advertised speed pero 100mbps parin ang max


consistent result so parang si EG8145V59 ang problem.
Click to expand...
Hello, i think yung GPON nga talaga may problema, may mga nakikita ako sa shopee na GPON lang without WLAN capability, itry ko bumili then doon ko directly ikabit yung both old GPON w/ WLAN capability, + yung Tenda Router ko, sana gumana.
 
Upvote 0 Downvote
IkaMusume said:
Wait din ako sa update mo idol, kapag gumana sa'yo bibili din ako
Click to expand...
Mukhang yung provided na GPON nga problema, gumana yung binili ko, pero single lan port lang siya, buti meron akong switch dito kaya may extra ports na, naka connect both yung old GPON ko, pero as router nalang, and yung tenda router, both 300mbps na binabato na speed sa 5ghz.
 
Upvote 0 Downvote
MinervaLux said:
Mukhang yung provided na GPON nga problema, gumana yung binili ko, pero single lan port lang siya, buti meron akong switch dito kaya may extra ports na, naka connect both yung old GPON ko, pero as router nalang, and yung tenda router, both 300mbps na binabato na speed sa 5ghz.
Click to expand...
good to hear you've found a solution.

question lang, di ba pwedeng completely bypass 'yung ONT? bale as a Layer 2 port/connection lang s'ya at yung router mo na ang magtrabaho as router.
 
Upvote 0 Downvote
nitro7 said:
good to hear you've found a solution.

question lang, di ba pwedeng completely bypass 'yung ONT? bale as a Layer 2 port/connection lang s'ya at yung router mo na ang magtrabaho as router.
Click to expand...
yup, ganon na nga, bumili ako ng 3rd party ONT, parang bridge lang to convert the fiber to LAN Port.

Fiber -> ONT -> Switch -> 2 Routers

Pero i think ang problema talaga dito is yung original na provided ni ISP, mag almost 5 years na din e, baka bumigay na yung sa LAN Ports, possibly kinalawang since malapit ako sa dagat kaya nag degrade na din.

I know pwede palitan ng ISP to possible for free kaya lang nababasa ko kasi inaabot ng weeks ang process ng replacement tapos parang may reactivation period pa yata na walang internet for around 48 hours+, which is inconvenient para sa akin, so i think band aid solution lang muna to, HAHAHA.
 
Upvote 0 Downvote

About this Thread

  • 41
    Replies
  • 3K
    Views
  • 12
    Participants
Last reply from:
jonileponce

New Topics

Trending Topics

Online now

Members online
465
Guests online
2,493
Total visitors
2,958

Forum statistics

Threads
2,269,894
Posts
28,932,043
Members
1,241,665
Latest member
markjay20
Back
Top