❓ Help DITO ZTE K10 BATTERY PORT

[Baabaam]

There is a version of the ZTE k10 modem with an external battery,
I ordered the DITO version and noticed that the back cover is different so i decided to open and check the main board and to my surprise there is a JST connector for the battery.
I immediately tested to see if it will work, but to no avail it did NOT!

I plugged in a 4.2v battery directly injecting the voltage but i think the firmware has disabled the battery option.

So my question is, is it possible to have it enabled if someone is able to flash a stock firmware?

 

[taurexn]

wala as in hindi part ng firmware yan, nasa hardware kasi by factory hindi naisama ang charging module sa board -siguro para affordable at nasa memorandum of agreement ni dito at manufacturer, same lang sa zlt s10 na may international version na may charging module at battery included

 

[Baabaam]

so i guess it's easier just to add a battery and a UPS board and solder it directly sa positive and negative pins ng dc port. i saw a board with step up and step down modules sa shopee hehe

 

[taurexn]

yes, pwede yan as a workaround para may internal rechargeable battery yun modem

 

[wh4yt]

Thanks po