🖥️ PC App Samsung_FRP_Tool

[drox-PH-Ceb]

click me: You do not have permission to view the full content of this post. Log in or register now.
for drivers: link here: https://phcorner.org/threads/gsm-driver-installer.1972253/#post-27926821
setup passcode: drox

 

[drox-PH-Ceb]

all tecn0 frp so far walang kawala basta frp lang...
may bagong update pag error sa extracting just download and install 7z

 

[drox-PH-Ceb]

 

[drox-PH-Ceb]

samsung A30 frp done


inifinx Note 30 5g frp done

 

[juls0292]

parasaan po ito master

 

[drox-PH-Ceb]

tecno pop 6 passcode and frp. For passcode just hard reset this use this tool to remove frp.

 

[Gabbyx]

Salamat paps

 

[flyingpike05]

boss pwede po eto sa tecno spark 10c at samsung galaxy A05?

 

[Hybrid1987]

Thanks idol

 

[drox-PH-Ceb]

boss pwede po eto sa tecno spark 10c at samsung galaxy A05?

pwede yan pero sa a05 di ako sure pero sa spark 10c tested ko na

 

[azofs]

Boss need activate po

Key: ba69a05b3b8f425f8b0f669a504c3088

 

[drox-PH-Ceb]

Boss need activate po

Key: ba69a05b3b8f425f8b0f669a504c3088

activated done

 

[flyingpike05]

all tecn0 frp so far walang kawala basta frp lang...
may bagong update pag error sa extracting just download and install 7z

all tecn0 frp so far walang kawala basta frp lang...
may bagong update pag error sa extracting just download and install 7z

View attachment 2947597View attachment 2947598



View attachment 2947596

boss wala namang instruction kung panu gawin ang frp removal. dapat nka on lang ba ang tecno spark 10c?
or need e power off muna? tsaka anung button yung pindutin pra ma detact ng tool yung celfon?

View attachment 2947597View attachment 2947598



View attachment 2947596

boss wala namang instruction kung panu e remove yung frp ng tecno spark 10c.
basta naka open lang ba ang phone sabay remove frp

Boss anu po yung driver needed to install para sa tecno spark 10c?
procedure would be helpful

boss pag click ko ng remove frp.
server not running?

 

[drox-PH-Ceb]

boss wala namang instruction kung panu gawin ang frp removal. dapat nka on lang ba ang tecno spark 10c?
or need e power off muna? tsaka anung button yung pindutin pra ma detact ng tool yung celfon?

boss wala namang instruction kung panu e remove yung frp ng tecno spark 10c.
basta naka open lang ba ang phone sabay remove frp

Boss anu po yung driver needed to install para sa tecno spark 10c?
procedure would be helpful

boss pag click ko ng remove frp.
server not running?

pasinsya boss hindi ko na ilagay kasi baka may tech na magalit.
pero sige lang ilabas ko na total matagal na itong triks na ito.
Ang maganda dito napaka safe talaga...
1. Una kung may password hard reset muna gamit dalawang mahiwagang kamay
2. Enable testmode para ma install ang driver then reboot pc. (makikita mo sa "universal mtp browser" sa tool ko)
3. Open "Universal MTP browser"
4. Click "Open Youtube"
5. On your cellphone screen right upper side click sa tatlong dot. -->then click "watch tv" para maka connect ka sa wifi
6. After maka connect sa wifi just hit back then click "youtube privacy" para ma open mo ang browser.
7. Pag na open na ang browser mo type "You do not have permission to view the full content of this post. Log in or register now." click "Open dial pad"
8. Then type engineering code (makikita sa directory folder ng Samsung FRP Tool) pag katapos type ng engineering code
automatic ma enable adb na yan.
9. Click Remove FRP [adb mode]
10. Allow usb debugging on your device
done!!!
if hindi ma detect just make sure to install adb drivers... thank you...
so far tested sa lahat ng infinix, tecno, etc.

kung may tanong paki láρág lang sa ibaba.

 

[flyingpike05]

pasinsya boss hindi ko na ilagay kasi baka may tech na magalit.
pero sige lang ilabas ko na total matagal na itong triks na ito.
Ang maganda dito napaka safe talaga...
1. Una kung may password hard reset muna gamit dalawang mahiwagang kamay
2. Enable testmode para ma install ang driver then reboot pc. (makikita mo sa "universal mtp browser" sa tool ko)
3. Open "Universal MTP browser"
4. Click "Open YøùTùbé"
5. On your cellphone screen right upper side click sa tatlong dot. -->then click "watch tv" para maka connect ka sa wifi
6. After maka connect sa wifi just hit back then click "YøùTùbé privacy" para ma open mo ang browser.
7. Pag na open na ang browser mo type "You do not have permission to view the full content of this post. Log in or register now." click "Open dial pad"
8. Then type engineering code (makikita sa directory folder ng Samsung FRP Tool) pag katapos type ng engineering code
automatic ma enable adb na yan.
9. Click Remove FRP [adb mode]
10. Allow usb debugging on your device
done!!!
if hindi ma detect just make sure to install adb drivers... thank you...
so far tested sa lahat ng infinix, tecno, etc.

kung may tanong paki láρág lang sa ibaba.

maraming salamat boss
saan pwd ma download ang adb driver na iyan, just in case hindi ma detect

 

[drox-PH-Ceb]

maraming salamat boss
saan pwd ma download ang adb driver na iyan, just in case hindi ma detect

dito https://phcorner.org/threads/gsm-driver-installer.1972253/#post-27926821

 

[drox-PH-Ceb]

another infinix passcode and frp
for passcode just hard reset.

pasinsya boss hindi ko na ilagay kasi baka may tech na magalit.
pero sige lang ilabas ko na total matagal na itong triks na ito.
Ang maganda dito napaka safe talaga...
1. Una kung may password hard reset muna gamit dalawang mahiwagang kamay
2. Enable testmode para ma install ang driver then reboot pc. (makikita mo sa "universal mtp browser" sa tool ko)
3. Open "Universal MTP browser"
4. Click "Open YøùTùbé"
5. On your cellphone screen right upper side click sa tatlong dot. -->then click "watch tv" and click connect wifi.
6. After maka connect sa wifi just hit back then click "YøùTùbé privacy" para ma open mo ang browser.
7. Pag na open na ang browser mo type "You do not have permission to view the full content of this post. Log in or register now." click "Open dial pad"
8. Then type engineering code (makikita sa directory folder ng Samsung FRP Tool) pag katapos type ng engineering code
automatic ma enable adb na yan.
9. Click Remove FRP [adb mode]
10. Allow usb debugging on your device
done!!!
if hindi ma detect just make sure to install adb drivers... thank you...
so far tested sa lahat ng infinix, tecno, etc.

kung may tanong paki láρág lang sa ibaba.

 

[flyingpike05]

dito https://phcorner.org/threads/gsm-driver-installer.1972253/#post-27926821

salamat boss.
panu pala maglagay ng tecno spark 10c sa test mode

 

[drox-PH-Ceb]

salamat boss.
panu pala maglagay ng tecno spark 10c sa test mode

yung pc lang ang e test mode then yung cp engineering mode

yung pc lang ang e test mode then yung cp engineering mode yung purpose is para ma enable ang usb debugging ng phone.

 

[flyingpike05]

yung pc lang ang e test mode then yung cp engineering mode

boss wala namang emergency call pag na hard reset ka ng phone?
panu mkapasok sa engineering mode? salamat