🚗 Cars · Motorcycles Aerox V2 going 200cc

[momosama]

Meron ba sainyo na nakapag boreup na ng aerox to 200cc? Anong mga parts pinalitan nyo?

Ang nasa isip ko palang kasi is:

Forge piston 65mm
Gear don sa likod
Jvt na pang gilid
Stage 2 cams

Balak ko din gawing 9lit yung gas tank nakita ko lang din don sa nagvvlog. Touring setup kasi balak ko e.

May kulang pa ba ko? Open for suggestions. Thanks!

 

[Juan Cervantes]

sana totoo benta ko airblade ko para pan dagdag kung sakali

 

[momosama]

sana totoo benta ko airblade ko para pan dagdag kung sakali

Haha totoo yan kuys kay sir mel ko nakita at kay motodeck

 

[bako32]

Usually for going bore up checklists any motorcycle

Piston ( touring usually low med compression type)
Cams
Crank shaft
Piston rod
Porting ports for stock head at major surgery kung need mod /new head (usually big head type)
New stud bolts na mahaba o beefy dpendy yan sa mechanico.
New jets for 180cc-200cc compatible(fi) +1-3 carb size o rejet stock carb setup for 180cc-200cc
Optional starter(if kaya ng starter yung compression then no need for new starter) o gusto magpalaki ng paa mo kaka dadyak kung ayaw mo ng starter
Reprog CDI/ CPU flash/RCDI.
Bigger pipe setup
Stiffer clutch spring
Bola(scooter)
Oil 15w/20w-40/50
Fuel system and pump
High temp type coolant( liquid cold)
Oil cooler(optional)
Fix cam chain tensioner
New cam chain(dependi sa mechanico nag setup)
Shims sandwich gaskets(if yung piston umabot sa head on tdc, masayodong high comp, sa mechanico nag setup)
New pulley system (dependi sa mechanico)
Mechanico na alam yung ginawa at maronung mag compute ng total cc to compression ratio na endi sumasabog.