PHThere are two ways to restore JetSteamTM series switches to factory default, one is to use the web interface, but sometimes you may not be able to log on the web interface. In this case, you should use console to restore it to factory default. This way only should be used when you have forgotten the user name or the password. In this case, you should use console to restore it to factory default.
Use serial cable to connect your switch to a computer. Then power off the switch.
Step 1:
On your computer click start-> All Programs-> Accessories -> Communications-> Hyper Terminal to run Hyper Terminal. And there will pop up a dialog box as shows. Enter a name, here we use test for example. Then click OK.
Step 2:
Change Port Settings as Picture 3 shows.
Bits per second: 38400
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Step 3:
Power on the switch, when you see Press CTRL-B to enter the bootrom (or bootutil), please press CTRL+B quickly, then you will see a boot-util cli.
Step 4:
Please input reset after “[TP-LINK]:”, and press Enter. Then input reboot after“[TP-LINK]:”, and press Enter again. Then you will see the switch is rebooting. And the switch will be restored to factory default.
Note: Please DO NOT do any other operations, or it may damage your switch.
Hello so halata naman na galing yan sa mismong website ng tplink .
pero inote ko narin na any terminal app pwede nyo gamitin jan like putty,hyperterminal,tera term. basta yung setting o configuration nyo sa com port o serial port is yung nasa step 2.
eto yung link for the reference
You do not have permission to view the full content of this post. Log in or register now.
wala lang naisipan ko lang magshare . hehehe.
Use serial cable to connect your switch to a computer. Then power off the switch.
Step 1:
On your computer click start-> All Programs-> Accessories -> Communications-> Hyper Terminal to run Hyper Terminal. And there will pop up a dialog box as shows. Enter a name, here we use test for example. Then click OK.
Step 2:
Change Port Settings as Picture 3 shows.
Bits per second: 38400
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Step 3:
Power on the switch, when you see Press CTRL-B to enter the bootrom (or bootutil), please press CTRL+B quickly, then you will see a boot-util cli.
Step 4:
Please input reset after “[TP-LINK]:”, and press Enter. Then input reboot after“[TP-LINK]:”, and press Enter again. Then you will see the switch is rebooting. And the switch will be restored to factory default.
Note: Please DO NOT do any other operations, or it may damage your switch.
Hello so halata naman na galing yan sa mismong website ng tplink .
pero inote ko narin na any terminal app pwede nyo gamitin jan like putty,hyperterminal,tera term. basta yung setting o configuration nyo sa com port o serial port is yung nasa step 2.
eto yung link for the reference
You do not have permission to view the full content of this post. Log in or register now.
wala lang naisipan ko lang magshare . hehehe.