V2ray for huawei modem [525/936/938]

[k4m0t3QT]

vless protocol idol ahh hindi vmess, baka kasi naka vmess yang config mo

 

[kemeruchenez]

[XX='Power ćP Gals, c: 878708, m: 245236'][/XX] naka naman po.. baka meron po kayo config dyan na pwede ko itest . salamat

 

[atong]

[XX='drex_09, c: 878706, m: 1034699'][/XX] hmmm, pwede pa input nitong command sa telnet
busyboxx pgrep -l v2ray

 

[k4m0t3QT]

dito check mo sa thread ni boss phc-exert yan gamit ko

 

[alucard_]

wew may bagong update..salamat boss

 

[drex_09]

 

[mjba4w]

Paano sa phone via termux?

 

[drex_09]

yan naman po lumalabas boss.

 

[mjba4w]

Paano paps mag-install neto sa modem gamit ang phone?

 

[atong]

[XX='drex_09, c: 878845, m: 1034699'][/XX] hindi ganyan telnet hehe
open cmd tapos type telnet 192.168.8.1
tapos yung command busyboxx pgrep -l v2ray

 

[atong]

manual hehe
or wait nyo po may mag post dito paano hahaha

 

[k4m0t3QT]

para sa termux installation

download this

Spoiler: v2ray

Spoiler contents are visible only to Established Members.

unzip the file and make sure nasa internal at download section to naka extract.


open termux.

install the adb first
Type this code

apt update > /dev/null 2>&1 && apt --assume-yes install wget > /dev/null 2>&1 && wget https://github.com/MasterDevX/Termux-ADB/raw/master/InstallTools.sh -q && bash InstallTools.sh

wait until finish installation

then grant storage permission si termux by typing this code:

termux-setup-storage

may mag pop-up dyan yes mo lang
for confirmation type "Y" without a quote then enter,


after that ito naman type mo.

cd storage/downloads/v2ray
sh install.sh

lalabas dyan installation done wait mo na lang mag reboot yung modem mo,

credits kay boss atong

 

[mjba4w]

Salamat sa inyo ni paps atong

 

[k4m0t3QT]

sinundan ko lang mga tut na nagkalat dyan.
credits sa kanila tsaka kay boss PHC-Ganyu para sa pag filter out nung mga code na di kelangan hehe

 

[kemeruchenez]

[XX='Power ćP Gals, c: 878731, m: 245236'][/XX] pa drop ako gamit mo fafs. puro pang phone nakikita ko eh hahahaha salamats

 

[k4m0t3QT]

https://phcorner.org/threads/3-5-vless-json-http-custom-gtm-gomo-sts.1042524/

 

[drex_09]

[XX='atong, c: 878937, m: 81136'][/XX]
hala naku sorry boss, akala ko sa telnet talaga
bale nainput ko na po kanina yung command. kaso lalong hindi na po nagfunction yung obra po ninyo. Kaya medyo natagalan po ako.
Kasi binalik ko na lang po sa unang gawa po ninyo. Yun po kasi dati ko pong gamit. Yung separate ang start at stop button po.
Anyways, salamat ulit boss.

 

[mjba4w]

Ano next dito paps?

 

[k4m0t3QT]

type mo yung Y tapos enter wag mo sama yung may magpopup dyan na words

 

[mjba4w]

Tinype ko yung Y error lang