🔒 Closed Checking media failure - Lenovo Laptop

[mariee_juanna]

Model: Lenovo Legion Y520

pag open ko po ng laptop may nakalagay na "Boot Device Missing" tapos ginawa ko po ito:

1. Restart your PC.
2. When the initial startup screen with the Lenovo logo appears, immediately press F2 to enter the BIOS setup. The actual key you need to press may vary from different models, but for most Lenovo laptops, it will be F2.
3. In the BIOS setup menu, select the Boot tab and press Enter.
4. Check the boot order and make sure your PC’s hard drive is in the first slot. If not, swap the order of boot devices so that your hard drive is first.
5. Highlight Boot Mode, press Enter, and swap from UEFI to Legacy Support.
6. Under that option, swap UEFI to Legacy First
7. Go to the Exit tab, highlight Exit saving changes, and press Enter

na open naman sya. pero nag error ulit. so restart ulit ng laptop tapos, checking media na ang nakalagay, then mag restart ulit. pabalik balik lang na ganoon. natapunan kc ng tubig yung laptop. pwde pa kaya un maayos?