🔒 Closed Captive portal for Esp8266

[redyw]

Mga papss baka may marunong sa arduino code dito,,
Patulong naman po,,

Pano po yung captive portal na may voucher code

 

[duhastmiech]

// WIFI Vendo... Mikrotik
// try nyo po ito kng gagana sa inyo
// feedback lng po kayo sa akin..

//ARDUINO using NODEMCU ESP8266
//kayo na po bahala mag debug... hope na makuha nyo.. pls help me din kng paano to maayos..

#include <SPI.h>
#include <Wire.h>
#include <Entropy.h>
#include <Ethernet.h>
#include <TelnetClient.h>
#include <LiquidCrystal_I2C.h>

#define randomSeed(s) srandom(s)

unsigned int mins = 0;
unsigned int hours = 0;
unsigned int days = 0;
unsigned int newminuntes = 0;
unsigned int newhourly = 0;
int buttonPress = 0;
int ledState = LOW;
int gates = 0;
int intervals = 0;
int start = 0;

const int ledpin = 5;
const int coinpin = 2;
const int buttonpin = 3;
const int disablepin = 4;

volatile int coins = 0;

unsigned long startMillis = 0;
unsigned long currentMillis = 0;
unsigned long previousMillis = 0;

String script;

uint32_t seed_value;

char letters[36] = {'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0'};

LiquidCrystal_I2C lcd(0x27, 20, 4);

EthernetClient client;
telnetClient tc(client);

//client IP here
byte clientMAC[] = { 0xAB, 0xBC, 0xCD, 0xDE, 0xEF, 0xFA };
IPAddress clientIp (0, 0, 0, 0);

//put here your router's IP address
IPAddress mikrotikRouterIp (0, 0, 0, 0);


void setup() {

pinMode(buttonpin, INPUT);
pinMode(ledpin, OUTPUT);
pinMode(disablepin, OUTPUT);

lcd.begin();
lcd.backlight();

lcd.clear();
lcd.setCursor(0, 0);
lcd.print("initializing....");
lcd.setCursor(0, 2);
lcd.print(" by asantos1");

delay(3000);

digitalWrite(disablepin, HIGH);

Serial.begin(9600);

while (!Serial) {
;
}

Entropy.initialize();

pinMode(buttonpin, INPUT);
pinMode(ledpin, OUTPUT);
pinMode(disablepin, OUTPUT);

lcd.clear();

attachInterrupt(digitalPinToInterrupt(coinpin), coinInterrupt, RISING);

}
void coinInterrupt() {

coins ++;
startMillis = millis();

}
void blinker() {

unsigned long currentMillis = millis();

if (currentMillis - previousMillis >= interval) {

previousMillis = currentMillis;

if (ledState == LOW) {
ledState = HIGH;
} else {
ledState = LOW;
}

digitalWrite(ledpin, ledState);
}
}

void loop() {

if (gate == 0) {

digitalWrite(disablepin, LOW);

lcd.setCursor(0, 1);
lcd.print(" Press Button ");
lcd.setCursor(0, 2);
lcd.print(" to Start ");

while (digitalRead(buttonpin) == LOW) {

interval = 1000;
blinker();
}

gate = 1;
coins = 0;

}

if ((gate == 1) && (start == 0)) {

digitalWrite(disablepin, HIGH);
digitalWrite(ledpin, LOW);

lcd.setCursor(0, 1);
lcd.print(" Insert Coin ");
lcd.setCursor(0, 2);
lcd.print(" ");

start = 1;
startMillis = millis();
}

currentMillis = millis();

if ((start == 1) && (coins < 1) && (currentMillis - startMillis >= 15000)) {

gate = 0;
start = 0;

}

if ((start == 1) && (coins > 0) && (currentMillis - startMillis >= 100)) {

// ADJUST RATES HERE
if (coins < 5) {
mins = coins * 10; // 15min/peso
}
if (coins >= 5 && coins < 10) {
mins = coins * 20; // 20min/peso
}
if (coins >= 10 && coins < 15) {
mins = coins * 30; // 30min/peso
}
if (coins >= 15) {
mins = coins * 45; // 45min/peso
}
hours = floor(mins / 60);
days = floor(hours / 24);
newhours = hours - (days * 24);
newmins = mins - (hours * 60);

Serial.println(coins);
Serial.println(days);
Serial.println(newhours);
Serial.println(newmins);

lcd.setCursor(0, 0);
lcd.print(" Credit: ");
lcd.print(coins, 0);
lcd.print(".00 ");

lcd.setCursor(0, 1);
lcd.print(" ");
lcd.print(days);
lcd.print(" day ");
lcd.print(newhours);
lcd.print(" hr ");
lcd.print(newmins);
lcd.print(" min");



}

currentMillis = millis();

if ((coins > 0) && (currentMillis - startMillis >= 10000)) {

lcd.setCursor(0, 2);
lcd.print(" Press Button to");
lcd.setCursor(0, 3);
lcd.print(" Generate Code");

}

currentMillis = millis();

if ((coins > 0) && (currentMillis - startMillis >= 11000)) {

digitalWrite(disablepin, LOW);

while (digitalRead(buttonpin) == LOW) {
interval = 150;
blinker();

}
digitalWrite(ledpin, LOW);

seed_value = Entropy.random();

randomSeed(seed_value);

char c[2] = {letters[random(36)]};
char o[2] = {letters[random(36)]};
char d[2] = {letters[random(36)]};
char e[2] = {letters[random(36)]};

lcd.setCursor(0, 0);
lcd.print(" CODE GENERATED ");
lcd.setCursor(0, 1);
lcd.print(" ");
lcd.setCursor(0, 2);
lcd.print(" ");
lcd.print(c);
lcd.print(" ");
lcd.print(o);
lcd.print(" ");
lcd.print(d);
lcd.print(" ");
lcd.print(e);
lcd.print(" ");
lcd.setCursor(0, 3);
lcd.print(" ");

script = "ip hotspot user add name=";
script += c;
script += o;
script += d;
script += e;
script += " limit-uptime=";
script += mins;
script += "m profile=hotspot";
int script_len = script.length() + 1;
char mscript[script_len];
script.toCharArray(mscript, script_len);

Ethernet.begin (clientMAC);

//want to use dhcp?
if (!Ethernet.begin (clientMAC)) {
lcd.clear();
lcd.setCursor(0, 0);
lcd.print("DCHP error ");
lcd.setCursor(0, 1);
lcd.print(coins);

while (1);

}

tc.setPromptChar('>');

//CHANGE HERE YOUR USERNAME/PASSWORD
if (tc.login(mikrotikRouterIp, "@admin@", "@@password@@")) {

delay(1000);

tc.sendCommand(mscript);

delay(5000);

tc.disconnect();

lcd.setCursor(0, 0);
lcd.print(" ");
lcd.setCursor(0, 1);
lcd.print(" ");
lcd.print(c);
lcd.print(" ");
lcd.print(o);
lcd.print(" ");
lcd.print(d);
lcd.print(" ");
lcd.print(e);
lcd.print(" ");
lcd.setCursor(0, 2);
lcd.print(" ");
lcd.setCursor(0, 3);
lcd.print(" THANK YOU ");

delay(10000);

lcd.clear();
coins = 0;
gate = 0;
start = 0;
}
}

 

[redyw]

Eto yung sa kabilang thread di po ba

 

[duhastmiech]

para same lang po sila.. try nyo lng po..

 

[redyw]

Mikrotek pa rin kailangan nito,,

Ganito sana magiging setup
Di na dadaan sa mikrotek

PLDT Fibr >> esp8266 >> voucher code client

 

[duhastmiech]

meron po ba kayong update...

 

[redyw]

Wala ehh,, kunti lang alam ko sa pagcode,,

Ano gamit mo microcontroller paps,

 

[duhastmiech]

ok....maganda yan..pwede ka ng gumawa ng robot AI..

 

[nexmojhenpot]

ako lods.. need kulang ng interesado

https://phcorner.org/threads/piso-wifi-code-on-demand.1072318/

 

[redyw]

Walang interesado dun papss
Dito nalang
Hahahaa

 

[redyw]

May paraan ba paps ,na di na dadaan sa mikrotik

 

[redyw]

Parang ganito

PLDT fibr >> nodemcu/esp8266 >> client phone

Voucher type mangyayari through captive portal nang nodemcu/esp8266

 

[nexmojhenpot]

pwede.. kaso ndi kaya handle ni node mcu ung madaming connected..

 

[nexmojhenpot]

check mo pldt sir if pwede maglimit ng time jan then supported sya ng telnet, kapag yes pwede sya gawan ng code.

 

[nexmojhenpot]

bali trabaho lang ni esp gumawa ng user account na may limit. if yung pldt mo pwede magcreate ng user na my limit ang time pwede yan.. ndi c esp ang magcut jan.. trabaho lang nyan taga gawa ng user account mali po kc ata pagkakaintindi nyu sir sa trabaho ni esp kay mikrotik.

 

[redyw]

[XX='nexmojhenpot, c: 1157206, m: 920297'][/XX] wala paps

 

[redyw]

[XX='nexmojhenpot, c: 1157198, m: 920297'][/XX] kahit eto lang muna

 

[redyw]

pwede.. kaso ndi kaya handle ni node mcu ung madaming connected..

Kahit eto lang muna paps ,
Kahit iilan lang muna makaconnect,
Basta gumana nang walang mikrotik

 

[nexmojhenpot]

bakit ayaw mo mikrotik? magsasayang lang ng panahon yung gagawa ng vendo na yan ang gagamitin na net limiter.

 

[samarmamento]

kung naka mikrotik kayo mga lods si Mikhmon gamiton nyo para taga create ng account at taga gawa ng vouchers ng maramihan.