Recent content by indraaguslesmana

issue fix, with restoring all partition from working LTE module. thank you all.

ok, try with same CP. 1. flash: P28M26ITelkomsel_HKM281_CP_V003-Mod.bin 2. disable Pipe d success. a minute 3. reboot. 4. access 192.168.8.1 write mtd11. P28M26ITelkomsel_HKM281_CP_V003-Mod.sqf, firstboot, reboot. 5. do system reboot. 6. Pipe e success. wait for a minute do reboot. APN is...

so i do uart. boot option 1 with initramfs run command, fw_printenv: fw_printenv bootcmd=tftp baudrate=57600 ethaddr="00:AA:BB:CC:DD:10" BootType=3 bootdelay=1 uboot_ver=V1.1 rootfs_data_fail=0 PCB_SN=P28X21050901xxx SN=P28X2105xxx IMEI=35021407xxx bootargs=console=ttyS1,57600n8...

im not sure, but i do see mtd structure like this. after exploit got ssh access. root@cpe:/# cat /proc/mtd dev: size erasesize name mtd0: 07f80000 00020000 "ALL" mtd1: 00080000 00020000 "Bootloader" mtd2: 00080000 00020000 "Config" mtd3: 00040000 00020000 "Factory" mtd4: 026c0000 00020000...

Hi Lenar, i have different device with identical hardware version like the devices success before. but start with different stock rom version. the initramfs successfully booted up, but when try to sysupgrade failed to boot. when i see uart log its stuck with message "bad magic number 55424923"...

sorry wait to long, i need to reboot after PIPE d, flash to mtd11 done. now how to enable again? is it 'e' argument? Thank you Lenar, it works after PIPE e. final question i have old hkm281 version. without soldering LTE module. do you think is possible to swap to another higher cat...

where is to disable PIPE mode? i try without disable first, ya 8.1 cant be reach. so the goal ssh to AP x.x.1.1, inside ap ssh again to x.x.8.1 right?

i just flash the CP and it fix the issue, i cant write to mtd11 becaouse i dont have. and it cant be force, it must be available before write. Thank you Boss Lenar your update CP, fix my problem.

Thank you lenar, im happy to wait. little clue, i remember 192.168.8.1/24 is default DHCP when device in Stock rom. Telkomsel Orbit Pro HKM281. but i have no idea, it set to virtual wwan_4. maybe its related wwan assign to eth1 when wwan iface already up and running. my br-lan is normal...

i cant follow install P28M26ITelkomsel_HKM281_CP_V003.sqf, because i don't have rootfs partitions now: mtd0: 00080000 00020000 "u-boot" mtd1: 00020000 00020000 "u-boot-env" mtd2: 00040000 00020000 "factory" mtd3: 07dc0000 00020000 "firmware" mtd4: 00400000 00020000 "kernel" mtd5: 079c0000...

Hi, Boss Lenar. Thank you for the great OpenWrt support for the R281. i have issue, the network cell is ready connect., but i see on wwan_4 just local ip 192.168.8.0/24. so when i try to ping 8.8.8.8 or google.com there no internet connection. is it related to checkatvalid, because im not...