nitro7's latest activity

last time na nag-OpenWRT ako, it was on a Netgear R7000. worked well enough with the limitations on the Broadcom chipset. i've been using Mikrotiks for about a decade... RB3011, and now CCR2004.

tell us what you want to do, para tugma ang sagot. also, anong mikrotik ang gamit mo - specifically with or without built-in wifi?

it would barely simplify things for you, pero pwede kang magsimula sa OpenWRT Supported Hardware.

Bakit iba standard kung lalake gumawa niyan? Ok lang yun pag lalake despite the fact natinatago? Yung "baka magalit" is never an excuse sa panloloko, regardless of gender.

me nabibiling "printhead cleaning solution", o kaya google mo lang 'yung DIY version nito - tulad ng Windex + water.

look at what is detailed in your plan's T&C. i doubt that any specific statement against sharing will be explicitly defined. tbh, mahirap i-police ito, apart from abnormal amount of data used. kung merong specific item about "fair use" sa...

salamat pala dito sir. gumana yung Bridge mode ni mamba. mark ko solution. HEHEHE Pero d ko mapatagus yung DUAL NAT.

Observe ko muna toh sir, etong Bridge Mode c Mamba. going to OpenWRT router.

thanks bro, hirap kasi makahanap ng matinong payong. tipong kaunti hangin lipad parang hinubaran ng palda basa ka for sure or saklap wasak yun bearing or pagkakatahi sa mga gilid ng payong

kung bridged: kung double-NAT:

not sure kung merong seller sa philippines, eh. it was specifically designed for wellington's windy weather. medyo pricey, pero matibay. 'yan ang makikita mo dito with the parents on the sidelines of their kids' netball or rugby games during the...

been a while since i had OpenWRT... di ba nalilimit ang pwede mong gawin kapag connected via LAN port? in effect, parang AP mode na rin kasi ito. can you apply VLAN 22 to a port going to 5v5 for Vendo? pag nagkat'yempo, i'll have a look at an...

first/best option is to set Mamba to bridge, and give all the routing functions to OpenWRT. kapag hindi na-bridge si Mamba, try the dual-NAT approach, noting na dapat magkaiba ang DHCP range nila (Mamba & OpenWRT) to avoid conflict.

looks like si Mamba lang ang DHCP server mo at 192.168.13.x. tama ba? connect Mamba LAN port to OpenWRT LAN port, and it should work. pero basically, di mo magagamit 'yung ibang OpenWRT features dun sa second router. otherwise, kung Mamba LAN...

not necessarily, unless you have a more capable router to use as your gateway. having OpenWRT does open up some features. ang kailangan talaga ay isa lang ang gateway na nagpe-perform ng NAT (network address translation) from your internal IP...

di ko alam kung available d'yan ang Blunt Umbrellas, pero subok na ito sa gale-force winds ng Wellington.

anong itsura ng nozzle check output? mukhang me blocked nozzles na ito. it can be quite an exercise to clean/unblock it. me nabibiling printhead cleaning solution. dagdag mo sa budget ang ink, dahil kokonsumo ng ink ito after flushing.

wala namang mawawala kung susubukan mo, other than your own time setting it up and testing. pero kung ako lang... di lang kasi OS ang nangangailangan ng memory. 8GB is too tight for most of today's applications. planuhin mo na ang extra 16GB...

kailangan mo i-check kung anong available sa lugar nila. confirm kung sinong FWA provider ang may network connectivity na abot sa kanila. kung walang reliable, starlink lang siguro ang pag-asa.

check if you have more than one DHCP server running. like with the Mamba and Main OpenWRT routers. parang na-mention mo sa kabila na hindi naka-bridge 'yung mamba.