nitro7's latest activity

Meron po tool dyan, pera pang bayad.

konting details pa... how do you know your ac pro is connected to your router? can you see it getting an ip address from your dhcp server (router)? if you know the ip address, can you just point the app to that ip address? are you sure your ac...

yes, depende sa gear at know-how ng kapitbahay madaling gawin 'yan. pero, kinausap mo na ba sila? kung me arrangement kayo, posible rin na hindi nila alam. baka me nabago silang setting at ito ang naging side-effect para sa iyo, kahit di naman...

kung problematic na sa umpisa, how can you trust it to maintain data integrity? i would suggest you consider using the known/proven brands. in fact, you can refer to the TP-Link tested media.

i will do a normal printhead clean for that, and i would expect it to clear the nozzle. 'yung deepclean pag malala na, as in maraming gaps, and in some cases, di mo na makita 'yung isang color. note na bukod sa magastos ito sa ink (not so much an...

hopefully it's not the case. there's also a chance na umalagwa lang 'yung papel. kung ayos naman ang print niya ngayon, ok lang 'yan. you can run a nozzle check to be sure it's fine.

wtheal is thisss

earphones/headphones are used interchangeably these days... ano bang preference mo? in-ears / over-ears / on-ears? open / closed / anc? wired / wireless? "pang-matagalan", do you mean battery life (runtiime)? service life (pang-ilang taong...

para sa ganito, di lang capacity ang titingnan mo pati rin ang sustained delivery - power or current rating na kayang i-sustain. i know xiaomi and cuktech (pretty much the same company) have good ones, but i've never used them. also consider...

blot? did you use thick paper? anyway, for the most part don't overthink it. hehehe enjoy mo muna. it should serve you pretty well for some time.

base doon sa kapitbahay namin, malaki na business niya, may sariling hardware shop, gasolinahan, fastfood (parang krispyking), pero nagtratrabaho parin. kaya kung ok lang trabaho mo, walang stress, tuloy mo lang ts para dagdag ipon para iinvest.

for me, that's actually the best solution. just to use it regularly. epsons will last you years if you print at least weekly. yung resetter is commonly used pag ayaw na mag-print, because the printer assumes the ink pad is full. so you replace...

Lahat naman may FUP. Kahit naman SL sa ibang bansa eh may FUP talaga. And besides, dagat ang pinag-uusapan dito (based sa post ni OP) so starlink is the recommended choice sa use-case niya. Alangan namang kakablehan mo ng fiber yung barko. LMAO...

Kahit pa dumating si Amazon Leo, kung ganyan din ang TOS at babalahurain niyo din harap-harapan ang TOS ni Amazon Leo, ganyan din mangyayari.... Pinoy nga naman talaga. îllégâl na gawain pero todo defend pa at sasabihing "diskarte" daw yun...

i don't know about practical (for some of the reasons shared below), but it should be possible. according to gemini, it's as simple as [1] uploading (to your router) the file you want to print, and [2] setting up scheduled cron job to spit it...

mas practical gawin sya sa OpenWRT routers kaso sabi ni google A.I. mode di daw kaya ~_~ hoping against hope na mapagana pa din.

Update* Mukhang bumalik na sa normal di na sya gaano na-dc (1 or 2 times in 5 hrs pero mas ok na un kaysa naman buong gabi every 3minutes) Salamat po sa mga recommendations sir RgnL and nitro7 Ganito n po ung ginawa ko Yung sa wifi na 2.4ghz...

Nung nirename mo ba yung wifi niyo ay naka enabled ba yung band steering? Yung magkasama ang 2.4 at 5ghz sa iisang wifi Kung oo, i try mo muna ioff at sa 2.4ghz ka mag connect kung magiging stable na. Possible lang kasi na naka connect sa 2.4ghz...

don't worry, i also intend to get this working. just for the heck of it, because i know some people do it. i have also read that some printers have this capability built into the firmware/software. some say it's as easy as getting gmail to print...

sa tingin ko ay hindi ok ang config mo kasi walang internet. hehehe /export file=anonymised_config.rsc hide-sensitive tapos post mo dito 'yung config mo. i'm sure someone can help.