xtremejg10
Enthusiast
This trick is very useful especially when all the vpn account providers are full. It has the same speed as using eproxy+openvpn or eproxy+ssh depending on your area or the remote proxy you used. This trick doesn't need account unlike on openvpn and ssh.
Steps for the eproxy:
1. Create new config on eproxy.
2. On view tab, go to payload generator.
Input:
a. working payload configuration
b. remote proxy and port (get working proxy on You do not have permission to view the full content of this post. Log in or register now.)
c. listen port (8080)
d. you may leave ssh and vpn, but if you want to save it then you may put something there.
3. On view tab again, go to dashboard put any username and password.
4. Tick none on dashboard then start.
Steps for usurf:
1. Open usurf.
2. Click option tab => Proxy settings => Manual proxy settings.
3. Put "127.0.0.1" on Proxy Host and "8080" on Proxy Port without quotation.
4. Then click ok then ok again.
5. Wait till connected.
Now set-up your browser on chrome:
1. Click on 3 dash on the upper right.
2. Settings
3. Go to bottom, click show advanced settings.
4. On network section, click change proxy settings
5. On connections tab, click LAN settings
6. Input 127.0.0.1 on address and 9666 on port.
7. Click ok then ok again.
8. Start browsing.
If usurf can't connect, try other proxy.
Update: Working proxies (August 28, 2016)
210.129.22.168:3128
94.177.242.194:1907
64.137.196.100:3128
94.177.231.60:1907
89.40.114.180:8080
94.177.242.240:3128
94.177.230.195:3128
94.177.241.137:3128
85.143.209.218:3128
64.137.181.83:8888
139.59.246.0:3128
1.162.218.96:3128
107.189.36.34:3128
162.243.36.133:3128
169.45.244.254:3128
I can't guarantee the speed. Meron yung mga mabibilis magconnect diyan na proxy. Hanaping niyo na lang
Credits pa rin to kay sir 0123456 dahil siya and nagpasimula ang paggamit ng eproxy dito sa PHC
Steps for the eproxy:
1. Create new config on eproxy.
2. On view tab, go to payload generator.
Input:
a. working payload configuration
b. remote proxy and port (get working proxy on You do not have permission to view the full content of this post. Log in or register now.)
c. listen port (8080)
d. you may leave ssh and vpn, but if you want to save it then you may put something there.
3. On view tab again, go to dashboard put any username and password.
4. Tick none on dashboard then start.
Steps for usurf:
1. Open usurf.
2. Click option tab => Proxy settings => Manual proxy settings.
3. Put "127.0.0.1" on Proxy Host and "8080" on Proxy Port without quotation.
4. Then click ok then ok again.
5. Wait till connected.
Now set-up your browser on chrome:
1. Click on 3 dash on the upper right.
2. Settings
3. Go to bottom, click show advanced settings.
4. On network section, click change proxy settings
5. On connections tab, click LAN settings
6. Input 127.0.0.1 on address and 9666 on port.
7. Click ok then ok again.
8. Start browsing.
If usurf can't connect, try other proxy.
Update: Working proxies (August 28, 2016)
210.129.22.168:3128
94.177.242.194:1907
64.137.196.100:3128
94.177.231.60:1907
89.40.114.180:8080
94.177.242.240:3128
94.177.230.195:3128
94.177.241.137:3128
85.143.209.218:3128
64.137.181.83:8888
139.59.246.0:3128
1.162.218.96:3128
107.189.36.34:3128
162.243.36.133:3128
169.45.244.254:3128
I can't guarantee the speed. Meron yung mga mabibilis magconnect diyan na proxy. Hanaping niyo na lang
Credits pa rin to kay sir 0123456 dahil siya and nagpasimula ang paggamit ng eproxy dito sa PHC