Closed Bm622m 2012 no signal lights cannot access gui

[mhaney]

pahelp po, BM623m DG to BM622m 2012, No signal lights and cannot access GUI.. please help thanks

 

[xown]

baka hindi compatible or nasira na.

 

[mhaney]

baka hindi compatible or nasira na.

nagamit ko sya ng 1month sir, than bigla nlng nawalan ng signal tapos di mkapasok sa Gui nya.. try ko na din ireflash gamit winspreader ayaw pa din mgblink ng signal lights

 

[Senpai]

So ano talagang firmware nya? bm623m or bm622m?

 

[xown]

yung mac na ginamit mo blank wan. nakasama siguro ang sayo. bomba mac

 

[mhaney]

So ano talagang firmware nya? bm623m or bm622m?

bm622m boss lift teka ss ko yun ipconfig

 

[Senpai]

tingin ng ipconfig tsaka ng arp -a

 

[mhaney]

eto lumalabas pag nag-ipconfig akowait lang arp boss lifteto yun arp nya

 

[Senpai]

okay 169 ip ka, ibig sabihin corrupted firmware / wrong insertion of firmware

eto gawin mo Reflash ka sa Dv235t greenpacket firmware You do not have permission to view the full content of this post. Log in or register now. after succesful flashing binasa ng network adapter mo si firmware, re Flash ka ulit to BM622m 2012 Firmware You do not have permission to view the full content of this post. Log in or register now.
dapat mabasa ng network adapter mo si firmware,di dapat 169 ip

then use this command of Putty or Telnet

For Putty

User:MT7109

Password:wimax

apinfo > /etc/default.cfg

sncfg commit

sncfg reset

sncfg default

reboot

---------------------

For Telnet

User:Firefly

Password:$P4mb1h1r4N4m4nT0!!

apinfo > /etc/default.cfg

sncfg commit

sncfg reset

sncfg default

reboot

---------
After this command at succesful mukang bago na ulit ang web gui mo,Master mac at default na ulit


*Note: Always Check arp -a on cmd yung Default Gateway 10.1.1.254 for dv firmware 192.168.254.1 for bm622m
*Keep in mind na dapat atleast mabasa ng network adapter mo si firmware,dapat di 169 ip,kung 169 ip parin. Reflash kalang ng reflash hanggang magkadefault gateway ka.

 

[mhaney]

okay 169 ip ka, ibig sabihin corrupted firmware / wrong insertion of firmware

eto gawin mo Reflash ka sa Dv235t greenpacket firmware You do not have permission to view the full content of this post. Log in or register now. after succesful flashing binasa ng network adapter mo si firmware, re Flash ka ulit to BM622m 2012 Firmware You do not have permission to view the full content of this post. Log in or register now.
dapat mabasa ng network adapter mo si firmware,di dapat 169 ip

then use this command of Putty or Telnet

For Putty

User:MT7109

Password:wimax

apinfo > /etc/default.cfg

sncfg commit

sncfg reset

sncfg default

reboot

---------------------

For Telnet

User:Firefly

Password:$P4mb1h1r4N4m4nT0!!

apinfo > /etc/default.cfg

sncfg commit

sncfg reset

sncfg default

reboot

---------
After this command at succesful mukang bago na ulit ang web gui mo,Master mac at default na ulit


*Note: Always Check arp -a on cmd yung Default Gateway 10.1.1.254 for dv firmware 192.168.254.1 for bm622m
*Keep in mind na dapat atleast mabasa ng network adapter mo si firmware,dapat di 169 ip,kung 169 ip parin. Reflash kalang ng reflash hanggang magkadefault gateway ka.

salamat boss try ko na ngayon kung magiging successful..

 

[seekandreach]

pahelp po, BM623m DG to BM622m 2012, No signal lights and cannot access GUI.. please help thanks

pre nagawa mo ba Bm623m mo natangal mo ba sa blank wan?

 

[mhaney]

pre nagawa mo ba Bm623m mo natangal mo ba sa blank wan?

Hindi pre, flasher na need.. nsa repair pa til now

 

[jhayar27]

panu po mag reflash?

 

[mhaney]

Reflash ic na un toy ko.. di n mkuha sa winspreder

 

[jhayar27]

nwala lng ledlights nung signal ko pero working xa

 

[nielmark03]

Lift

Good evenong sir,

ganito po kasi din problema ko sa bm622m modem ko.
ginawa ko na po yung steps na sinabi nyu.
kasu lng HINDI ko po MA-ACCESS WEB GUI at TELNET 192.168.254.1

ano po gagawin ko?
salamat po.

 

[Senpai]

bm622m ho ba yan? na hard reset nyo na? nacheck nyo na SSH nya? open putty type 192.168.254.1

 

[nielmark03]

Lift

bm622m po.
salamat po sa post nyu.
nakuha ko rin sa wakas gamit yung putty

time vintage nlng po ang problem.
merun po ba kayung script ?
hehe

 

[paulskie3]

I have the sane prob. But dv235t ang model ko. The led light keeps on blinking and ndi ako nakaka access s gui.

 

[bryanace23]

sir pareho po kme ng prob. Ang nangyare kc.. nakita ko po ung TUT nyo n Bm622m 2013 > dv smart gp > bm622m 2012 about downgrade. Nung ngflash ako papuntang smart successful, then nung after ko n pong iflash ng 2012 ayaw po gumana... tpos wla n po biglang ilaw 5 leds ko... nastock n po ako sa smartbro n GUI at ang IP po ay 192.168.254.1


tnx po if my iba p pong solusyon gnwa ko n po ulit yung sinabi nyo dito pero ayaw p dn pong umilaw at ayaw n pong mapalitan ng firmware...


Salamat
 
sir ayaw po umilaw sakin... khit mgreflash ako ayaw po tla... nstock n po ako sa smartbro then wlang ilaw. 192.168.254.1 ang ip