PHFor HPI Version >>Click Here<<
How to create Virtual WiFi using SVL?, and is it work like HPI Version?
[+] The Answer is Yes
How it Works?
[+] Creating your own WiFi in your PC/Laptop, can share internet from Internet Adaptor to Hosted WiFi Adaptor.
Instruments needs:
[+] SVL Injector(from link You do not have permission to view the full content of this post. Log in or register now.)
[+] Laptop or PC
[+] Administrator User for Windows(Not Guest User)
[+] WiFi Adaptor or Bulit-in WiFi Adaptor
[+] CMD
[+] Brain
For Laptop or PC:
(Note: No WiFi Adaptor, No Results)
1. Make sure you are running Administrator User in your Laptop or PC.
2. Visit and Download SVL Installer at above link.
3. Until it finished, open SVL App.
4. Setup your own credentials and payload too(make sure it's working) for SVL App.
5. Install TAP Driver via Tool > Install TAP > Choose if your device running if 32bit or 64bit.
6. Run CMD turn to "Run As Administrator".(Requires Administrator User, not Guest/Standard User)
Type of the following command.
Setup for SSID and Password(must 8-digit characters).
Format: netsh wlan set hostednetwork mode=allow ssid=<Any> key=<ANY>
Example: netsh wlan set hostednetwork mode=allow ssid=MarcBuday key=goodluckyourmission
After your setup, must be appeared:
The hosted network mode has been set to allow.
The SSID of the hosted network has been successfully changed.
The user key passphrase of the hosted network has been successfully changed.
To start Virtual WiFi, must perform command:
netsh wlan start hostednetwork
To stop Virtual WiFi, must perform command:
netsh wlan stop hostednetwork
Then you can minimize the cmd should use later, if you want.
7. Go to Control Panel > Network and Sharing Centre > Change Adapter Settings > Open Properties who have TAP-Windows Adapater V9
8. Open TAP-Windows Adapter V9's Properties:
9. Click panel of Sharing.
10. Check the Allow other network users to connect through this computer's Internet connection.
11. Choose Microsoft Hosted Network Virtual Adapter via Home network connection.
12. Click Settings.
13. Choose port, example 1700 and 1701
14. Then ok, at the end of Properties.
15. Back to SVL App, in Tunnel Panel should use Forward to Tun2Sock.
16. Click Connect.
17. Connect your device at your own Virtual WiFi.
Enjoy...
If not working, but success.. Try cdc your SVL
How to create Virtual WiFi using SVL?, and is it work like HPI Version?
[+] The Answer is Yes
How it Works?
[+] Creating your own WiFi in your PC/Laptop, can share internet from Internet Adaptor to Hosted WiFi Adaptor.
Instruments needs:
[+] SVL Injector(from link You do not have permission to view the full content of this post. Log in or register now.)
[+] Laptop or PC
[+] Administrator User for Windows(Not Guest User)
[+] WiFi Adaptor or Bulit-in WiFi Adaptor
[+] CMD
[+] Brain
For Laptop or PC:
(Note: No WiFi Adaptor, No Results)
1. Make sure you are running Administrator User in your Laptop or PC.
2. Visit and Download SVL Installer at above link.
3. Until it finished, open SVL App.
4. Setup your own credentials and payload too(make sure it's working) for SVL App.
5. Install TAP Driver via Tool > Install TAP > Choose if your device running if 32bit or 64bit.
6. Run CMD turn to "Run As Administrator".(Requires Administrator User, not Guest/Standard User)
Type of the following command.
Setup for SSID and Password(must 8-digit characters).
Format: netsh wlan set hostednetwork mode=allow ssid=<Any> key=<ANY>
Example: netsh wlan set hostednetwork mode=allow ssid=MarcBuday key=goodluckyourmission
After your setup, must be appeared:
The hosted network mode has been set to allow.
The SSID of the hosted network has been successfully changed.
The user key passphrase of the hosted network has been successfully changed.
To start Virtual WiFi, must perform command:
netsh wlan start hostednetwork
To stop Virtual WiFi, must perform command:
netsh wlan stop hostednetwork
Then you can minimize the cmd should use later, if you want.
7. Go to Control Panel > Network and Sharing Centre > Change Adapter Settings > Open Properties who have TAP-Windows Adapater V9
8. Open TAP-Windows Adapter V9's Properties:
9. Click panel of Sharing.
10. Check the Allow other network users to connect through this computer's Internet connection.
11. Choose Microsoft Hosted Network Virtual Adapter via Home network connection.
12. Click Settings.
13. Choose port, example 1700 and 1701
14. Then ok, at the end of Properties.
15. Back to SVL App, in Tunnel Panel should use Forward to Tun2Sock.
16. Click Connect.
17. Connect your device at your own Virtual WiFi.
Enjoy...
If not working, but success.. Try cdc your SVL