❓ Help 100 PESOS LOAD SA MAKAKATULONG SAKIN.

Status
Not open for further replies.

Phc-Miscrits

🎗️D' PROD1GY
ang akin phone ay asus t00j
then yung problem nya ay di sya nag boboot (boot loop)
ff.webp

yan lang sya di sya matapos mag loading

tinry kona mag flash ng custom rom and use asus flash tool kaso may proble parin
NOTE: before masira yung cp ko ang kanyang android version ay 5.1 lollipop
 
ito pre gawin mo di ko na need ng load libre lang ito gawin mo
Press and hold Power button (no. 4 still continue press and hold), so now we hold Volume Up Button + Power Button together. Wait until vibrate appear at ASUS ZENFONE GO ZB450KL, then release Power button (do not release Volume Up button)
 
[XX='Phc-Miscrits, c: 230255, m: 1535321'][/XX] basta pre gawin mo yan wala namang masama if gagawin mo eh proven and tested ko na yan may Asus rin ako dati pre Asus Zenfone 4 tapos yung na bootloop rin ganyan rin ginawa ko naayos try mo gawin yan
 
date kase mga ilang months na inupgrade ko yung android version from kitkat to lollipop, tapos edi success naman kaso katapos ng upgrade dina gumagana yung phone ko kapag hindi naka charge( nag hahang sya kapag ginamit ng hindi naka charge) tapos ayon ngayon naboot loop nalang bigla
 
ZENFONE 5 (T00F, T00J) ONLY!

Required downloads:



Steps:
  1. Install the Intel USB Drivers
  2. Rename the Jelly Bean Firmware file, changing the extension from .raw to .zip
  3. Create a directory for all the files (e.g.: C:\zenfone)
  4. Extract the contents of the Jelly Bean Firmware and ADB+Fastboot on the directory you just created
  5. Copy the file of Offline Update Image Script (sec_offline_update_image.cmd) to the same directory
  6. Shutdown your phone and start in droidboot mode (Power + Vol. Up)
  7. Plug the USB
  8. Assert that your device is connected, check by running the command fastboot devices on a Command Prompt
  9. Go to the directory you created before and run the file sec_offline_update_image.cmd as administrator
  10. When your device reboot again into bootloader, check if there was no errors (the userdata erase error can be ignored with no problems). If there was any error, I recommend you to go back and check if you done all steps correctly. If not, just use the volume buttons to select the option 'Reboot' and activate it by pressing the Power key
 
Status
Not open for further replies.

About this Thread

  • 40
    Replies
  • 896
    Views
  • 10
    Participants
Last reply from:
laxus456

Trending Topics

Online now

Members online
1,052
Guests online
1,196
Total visitors
2,248

Forum statistics

Threads
2,274,053
Posts
28,953,385
Members
1,235,036
Latest member
chris_1234567
Back
Top