🔒 Closed Pano maglock ng band 28 sa fx-id3

[Jonloi32]

Pano maglock ng band28 sa fx-id3

 

[viprasys]

You do not have permission to view the full content of this post. Log in or register now. change mo lang yung ascii letter ng normal letter po

 

[SVT]

Pano po pag ganito ayaw ma tick ng band 1 at band 28?

Ito po router version ko
Device Model:Evoluzn FX-ID3
Router Version:Evoluzn_PLDT_ID3_1.1.0

Salamat

 

[J4Jesse]

Change mo lang 'yung "Times" field as shown below, then click apply. Automatic nang ma-tick ang band 1 and 28.

 

[llana_Rhoades]

thank you sir. Pero pag nicheck ko po yung dashboard after saving eh 5 nanaman po sya. Di ko naman chineck yun po.

 

[Jonloi32]

Pano mag unlock ng fx-id3?

 

[Jonloi32]

You do not have permission to view the full content of this post. Log in or register now. change mo lang yung ascii letter ng normal letter po

Ano po?

 

[SVT]

Yes po na ka chevk na siya sa 1 at 28 pero dashboard band 3 naka show

 

[llana_Rhoades]

Yes po na ka chevk na siya sa 1 at 28 pero dashboard band 3 naka show

Up

 

[llana_Rhoades]

Ano po?

After po ba neto ma llock na manually yung banda po?

 

[Juan_75]

Yes po na ka chevk na siya sa 1 at 28 pero dashboard band 3 naka show

I had the same issue when I learned to set this frequency set-up manually. I believe it's your modem helping you still "get" signal from the tower due to its incapacity to receive a signal from Band 28.

What I did is, I took a very long extension cable, plugged in my modem, then placed my modem in every feasible corner where it can collect the signal.

Please note that I kept the frequencies locked to Bands 3 and 28 while scanning. By default, you will see Band 3 locked in the system. Then, after reaching RSRP of equal to or more than -100 AND SINR of over +5, keep it to where it's placed at that very moment, reboot your modem, and you should see the band change to Band 28 with better internet speed - at least this thing happened to me, may not be applicable to everyone.

 

[llana_Rhoades]

Change mo lang 'yung "Times" field as shown below, then click apply. Automatic nang ma-tick ang band 1 and 28.

View attachment 813397

Napansin ko lang na pag nichange yung Value bg Times eh nawawala yung check sa 1-28.
ibig po ba sabihin neto maactivate lang na magcchange ng band 1/28 mula 12AM-12:15AM po?

 

[hexar1979]

atc AT^HFREQINFO? - Get EARFCN value.
atc AT^FREQLOCK? - Get current EARFCN lock value.
atc AT^FREQLOCK=1,1525,\"03\" - Lock EARFCN value in LTE. [ Replace EARFCN in your current EARFCN. ]
atc AT^FREQLOCK=0 - Disable or remove EARFCN lock value.

 

[rrosales0503]

Sir hexar1979 san po yan nilalagay sa system command po ba? sa advance menu

 

[hexar1979]

dapat naka enable na ang adb at telnet sa modem nyo tapus gamit kau puty...

 

[hexar1979]

ang na test ko palang na working ay sa 936 at 938 credits kay jerome laliag

 

[BernadithLupaypay]

Sir sa putty po ba to or sa command ng advance?

 

[gero88]

Up for the commands from hexar1979. Sa Putty ba yan? or sa commands ng Modem mismo? Thanks.

 

[marion017]

Ff

 

[andrixx]

Ff