🔒 Closed B315s-936 TATTOO LEVEL UNLOCK EASY & FULL ADMIN

[edmond1675]

How To Unlock Easily

BASA MODE Muna
Ito na Po ung Pinaka-Madaling Paraan Para Ma-Unlock ang 936 na Totto Level
Muka lang mahaba kasi naka Include dito ang mga Picture at kung papaano Mapa-USB MODE ang MODEM
Para Mapa-connect sa PC . USB to USB
At Di binubuksan ang Unit Marami na nag kalat jan na Procedure
Na sayo parin kung saan ka hiyang

I hope na di lalabas ito sa iba

Para sa Mga Newbie na Katulad ko

Follow This
Tool
-LAN CABLE
-USB CABLE MALE TO MALE



YOU NEED THIS FILE's
B315s-936 Tool Unlock Re-Upload bY häçktech28.rar

Pass - phcorner


Ok Game kna ba?

PREPARING USB MODE ( GREEN LIGHT ) sa USB PARA MA-UNLOCK at MA-FULL ADMIN
Paano ?

Follow This

1. Open B593s-22_Multicast_upgrade_tool
Follow The Image


2. Plug LAN CABLE , Plug POWER ADAPTOR

Flashing Color indicator
Coding For Identify Mode

1
Red


2
Blue

Wait Flashing 60 Seconds
Mag Re-restart Yan

3
Blue


4
Red

Press Power + WPS
For 10 Seconds

5
Blue Wait Flashing 60 Seconds Again


6
Restart na sa Green
Close muna si B593s-22_Multicast_upgrade_tool

Means USB MODE na


7. Install Driver FC_Serial_Driver_Setup

8. Connect USB Male to Male
Green


9. Open CID Reader
Check Comport dapat parehas sa CID Reader
Port - Huawei mobile connect - 3G PC UI Interface

Send This
at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0

(this code will permanently unlock your modem)




Send This
AT^SFM=1

(this code will enter your modem into factory mode, preparation for admin mode)




Send This
AT^RESET

(modem will reboot after sending this code)



After That Remove USB
Remove Adaptor

Repeat Flashing


2. Plug LAN CABLE , Plug POWER ADAPTOR
Flashing 60/sec
Wait mo lang Hanggang Mag Automatic Green Color na yan no need Press anything
( USB MODE )


Close B593s-22_Multicast_upgrade_tool

8. Connect USB Male to Male
9. Open CID Reader
Check Comport dapat parehas sa CID Reader


Send This

AT^SFM=0
(this code will exit your modem into factory mode)



Send This
AT^RESET

(modem will reboot after sending this code)


Remove USB / Remove Adaptor
Insert Smart / Sun Sim etc.

Then Plug LAN Cable / Adaptor
Go To Address bar In your browser
Dial Telnet 192.168.8.1



Done. . .

 

[B A N N E D]

eh saan naman ang mga pictures? halatang copy paste

 

[PHC-Hershey]

Hahah working lang yan dun sa old 936 diba ? Tapos minsan di pa kumakagat yung trick na yan para sa download mode. Tagal na nitong tutorial na to eh

 

[ulo0os]

hi sir wrong password, need ko sana ung cid reader. pa update naman po.

 

[Gynyx236]

Matagal na yan ts huli kana by d way slamat
Keep sharing

 

[ulo0os]

hi saan po pwedeng mka dload ng cid reader at huwaei driver, deadlinks kasi sa mga tuts na nabasa ko. pa link po, maraming salamat!

 

[PHC-Hershey]

hi saan po pwedeng mka dload ng cid reader at huwaei driver, deadlinks kasi sa mga tuts na nabasa ko. pa link po, maraming salamat!

Mag aunlock ka ng 936 ?

 

[Gynyx236]

Then hindi lahat ng 936 tattoo modem nakukuha sa usb mode ung iba ayaw tlga

 

[PHC-Hershey]

Then hindi lahat ng 936 tattoo modem nakukuha sa usb mode ung iba ayaw tlga

Baklas modem talaga tapos lagyan ng jumper yung 2 solder spots

 

[AngEl May]

Salamat po lods❤
E attach ko nalang tong dalawang usb wire ko para may male to male usb wire ako salamat❤

 

[Niruuuuu]

same lang po ba yung file na uploaded sa mediafire at 4shared?

 

[rhaishiun009]

Salamat TS need ko to nabura na kasi yung mga files ko..
pero..
wrong password TS...

 

[a.ronald45]

salamat po dito sir.

 

[neversaydie04133]

bossing di po madownload ahmp sayang naman po