❓ Help Bm622m 2012 due to 169 ip downgraded to gp v7 upgraded to bm622m problem

[Bernel Caduada]

Naka experience na po ba kayo na yung bm622m 2012 niyo biglang nadisconnect, close ang telnet, makaka access sa GIU pero yung mac naging words..?? dami akong nafollow na tut about dito...

Eto po ginawa ko;

1. Downgrade ang 22m ko sa GP V7..( of course following the proper procedure?
2. After na downgrade..at makapasok sa giu at makalog in na sa admin account..
3. Upgrade na namn ako to BM622m 2012 na firmware

Problems after upgrading sa bm622m..
1. LAN disconnec and connect always refreshing
2. cannot access GIU,
3. CLose parin telnet
4. Di ko na alam ang gagawin....tulong po.........

 

[SpectralDeum]

c boss lift na bahala dyan ^^

 

[Bernel Caduada]

inaantay ko pa tulong ni tol lift

 

[Senpai]

so sa gp firmware ka nagkaproblema ganito
pag nasa gp firmware kana,log in ka firmware upgrade or via winspreader
set ka muna static ip sa ipv4
192.168.15.2 ip
dns.auto na yun
192.168.15.1 - default gateway, click okay, then tsaka mo salpak si bm622m firmware

after flashing
punta ka ulit sa ipv4, click mo automatic

then if hindi unidentified network access
go to putty or telnet
--------------------------
putty:SSH port 22
login as useer : mt7109 pass: wimax
--------------------------
Telnet port 23


Firefly

$P4mb1h1r4N4m4nT0!!

------------------------------

type in this command:

apinfo > /etc/default.cfg

sncfg commit

sncfg reset

sncfg default

reboot
~~~~~~~~~~~~~~~~~~~

after that command, newly gui na with master serial and master mac
parang bagong device goodluck!

 

[Bernel Caduada]

cge tol, try ko muna ngayon... feedback nalang after 20 mins..hehehe

 

[Bernel Caduada]

Salamat talaganboss lift..hehhee..humana na ulit Bm622m ko...more power

 

[Senpai]

Thanks for the feedback Close all port anti remote Go to Advanced > Telnet/SSH/HTTP Uncheck under WAN, lan lang may check enjoy bro!choose your best answer or edit your thread title with the prefix solved bro

 

[Bernel Caduada]

Thanks for the feedback Close all port anti remote Go to Advanced > Telnet/SSH/HTTP Uncheck under WAN, lan lang may check enjoy bro!choose your best answer or edit your thread title with the prefix solved bro

Salamat sa tips..perk dead na laht na na snipe ko boss,yung 28 series po na new series?

 

[Senpai]

old series ang 28, bm622m try mo C8/C4/0C/E8/F4

 

[Bernel Caduada]

Thanks for the feedback Close all port anti remote Go to Advanced > Telnet/SSH/HTTP Uncheck under WAN, lan lang may check enjoy bro!choose your best answer or edit your thread title with the prefix solved bro

Salamat sa tips..perk dead na laht na na snipe ko boss,yung 28 series po

old series ang 28, bm622m try mo C8/C4/0C/E8/F4

salamat boss's feedback nalang din mamaya

 

[iamjep09]

pa.help poh pano poh mag downgrade ng bm622i 2011 into 2010 ? help mga idol.

 

[nielmark03]

Lift

good evening sir,
sir pa help naman ganito din po kasi problema nang 622m ko,
ginawa ko na yung steps na sinabi nyu peru ayaw parin.

PROBLEM:
-di po ako makapasok sa telnet port 23
-ayaw din sa telnet 192.168.254.1
-wala din LED lights

paulit-ulit ko na pong pina-flashed gamit winspreader peru wala pa rin.

 

[hardz]

Naka experience na po ba kayo na yung bm622m 2012 niyo biglang nadisconnect, close ang telnet, makaka access sa GIU pero yung mac naging words..?? dami akong nafollow na tut about dito...

Eto po ginawa ko;

1. Downgrade ang 22m ko sa GP V7..( of course following the proper procedure?
2. After na downgrade..at makapasok sa giu at makalog in na sa admin account..
3. Upgrade na namn ako to BM622m 2012 na firmware

Problems after upgrading sa bm622m..
1. LAN disconnec and connect always refreshing
2. cannot access GIU,
3. CLose parin telnet
4. Di ko na alam ang gagawin....tulong po.........

Reply ako dito dahil ang bm622m ko hindi ko narin ,,,,
ma accest GUI na 19.168.254.1 at sa cmd. ipconfig wla na rin po sya gateway baka may solusyon po dito tnry ko lang naman po downgrade to Green packet... Pwedi po ba ito reflash? pa help po....

 

[Bernel Caduada]

puwede yan
may tut yan dito hanapin lang, tiyaga lang tol

 

[xiiavuh]

sir hindi naba i'unplug ung modem bago start ung winspreader..

 

[Jhyke1413]

Thanks for the feedback Close all port anti remote Go to Advanced > Telnet/SSH/HTTP Uncheck under WAN, lan lang may check enjoy bro!choose your best answer or edit your thread title with the prefix solved bro

Boss lift ako din po pahelp pwede ka po tv???