🔒 Closed Canon G-Series Tricks without Resetter

[Xhure]

Resetting the waste ink absorber on a Canon printer can resolve some error codes that appear when turning it on.

Make sure the printer is turned off.
Press and hold the Resume button (triangle inside a circle).
Whilst it is held down, hold down the Power button. The green led light should come on.
Keep the Power button held down. Release the Resume button and then press it twice. The light should go amber, then green again.
Release the Power button.
Press the Resume button four times and then press the Power button straight after to confirm the selected action (Reset Counter Absorber).
Turn off the printer and then turn it on again

e-off mo muna tapus eservice mode
press reset while g1000 series off then press power button while holding reset
tapus release reset button then press 5 times after that hintayin mu tumigil yung green light tpus pindutin mu reset button 5 times tapus magpreprint sya tpus patayin mu tapus e-on mu ulit..

 

[GiovanniMartin16]

Thanks po.

 

[gov20]

Maraming salamat bossing.

 

[mykmatanong]

Resetting the waste ink absorber on a Canon printer can resolve some error codes that appear when turning it on.

Make sure the printer is turned off.
Press and hold the Resume button (trïânglê inside a circle).
Whilst it is held down, hold down the Power button. The green led light should come on.
Keep the Power button held down. Release the Resume button and then press it twice. The light should go amber, then green again.
Release the Power button.
Press the Resume button four times and then press the Power button straight after to confirm the selected action (Reset Counter Absorber).
Turn off the printer and then turn it on again

e-off mo muna tapus eservice mode
press reset while g1000 series off then press power button while holding reset
tapus release reset button then press 5 times after that hintayin mu tumigil yung green light tpus pindutin mu reset button 5 times tapus magpreprint sya tpus patayin mu tapus e-on mu ulit..

sir pede din ba to sa G2000?

 

[Xhure]

pwd kaso meron effect yan yung printer mo...hnd n kaylangan ereset ulit...

 

[gred18]

Thank you boss guma na saakin. .
May error na B202. Buti nakaya pa ng reset.