PHPHC-VanesMTP
Enthusiast
HOW TO HÄCK WIFI USING CMD
You can experiment these trick with your neighbors or friends. It’s not necessarily that this trick will work with every wifi because of upgraded hardware. But you can still try this crack with wifi having old modems or routers.
1: WEP: Wired Equivalent Privacy (WEP) is one of the widely used security key in wifi devices. It is also the oldest and most popular key and was added in 1999. WEP uses 128 bit and 256-bit encryption. With the help of this tutorial, you can easily get into 128-bit encryption and H@ck WiFi password using CMD.
2: WAP and WAP2: Wi-Fi Protected Access is an another version of WiFi encryption and was first used in 2003. It uses the 256-bit encryption model and is tough to häçk. WAP2 is an updated version of WAP and was introduced in 2006. Since then it has replaced WAP and is now been used mostly in offices and colleges worldwide.
Below are some steps to häck wifi password using cmd. Follow them carefully and you might get one of your neighbors passwords.
Häcking a Wi-Fi device is not always easy. You have to be careful of so many steps. Otherwise, you might even get caught. For easy and secure häçking, one should use the command prompt (cmd). Cmd is one of the most used features of Windows that gives you access to almost everything on a system. If used properly, you can even get inside other remote systems.
2: In command prompt window, type
"netsh wlan show network mode=bssid"
3: This command will show all the available WiFi network in your area
4: This is the last step. Just type:
"netsh wlan connect name=(wifi name)"
"netsh wlan connect name=mynetsata1"
and you will be connected to that WiFi network.
5: To disconnect it, type
netsh wlan disconnect
There are many other methods for exploiting a wifi to get its password.
NOTE: THIS TUTORIAL IS FOR EDUCATIONAL PURPOSES ONLY!
CREDITS:EUKIKILUA
You can experiment these trick with your neighbors or friends. It’s not necessarily that this trick will work with every wifi because of upgraded hardware. But you can still try this crack with wifi having old modems or routers.
1: WEP: Wired Equivalent Privacy (WEP) is one of the widely used security key in wifi devices. It is also the oldest and most popular key and was added in 1999. WEP uses 128 bit and 256-bit encryption. With the help of this tutorial, you can easily get into 128-bit encryption and H@ck WiFi password using CMD.
2: WAP and WAP2: Wi-Fi Protected Access is an another version of WiFi encryption and was first used in 2003. It uses the 256-bit encryption model and is tough to häçk. WAP2 is an updated version of WAP and was introduced in 2006. Since then it has replaced WAP and is now been used mostly in offices and colleges worldwide.
Below are some steps to häck wifi password using cmd. Follow them carefully and you might get one of your neighbors passwords.
Häcking a Wi-Fi device is not always easy. You have to be careful of so many steps. Otherwise, you might even get caught. For easy and secure häçking, one should use the command prompt (cmd). Cmd is one of the most used features of Windows that gives you access to almost everything on a system. If used properly, you can even get inside other remote systems.
- STEPS:
2: In command prompt window, type
"netsh wlan show network mode=bssid"
3: This command will show all the available WiFi network in your area
4: This is the last step. Just type:
"netsh wlan connect name=(wifi name)"
"netsh wlan connect name=mynetsata1"
and you will be connected to that WiFi network.
5: To disconnect it, type
netsh wlan disconnect
There are many other methods for exploiting a wifi to get its password.
NOTE: THIS TUTORIAL IS FOR EDUCATIONAL PURPOSES ONLY!
CREDITS:EUKIKILUA
