🔒 Closed PC ERRORS and SOLUTIONS

[totoykobe]

sakin naman bro is I can't adjust my screen brightness anymore.. even if I'd adjust it manually.. how to fix this prob bro? I will appreciate any help from yours.. : )

 

[Joelake21]

Sir, Matagal po mag boot yung pc ko, after ko ma plug in ung saksakan tapos mapindot ang power button, mga 30 sec pa bago aandar ung pc ko. HELP POO!!!!

 

[BoXx]

boss. 7 beeps ung naririnig ko. ang ginawa ko sa dating laptop ko na un eh kunukulob ko sa kumot for about 10 mins tas afterwards pag mainet(which is dumb to do sorry wala kasi akong alam sa laptop non) na eh binuksan ko tas ayun normal ulit sya. then nagdecide ako na ibenta yon nang nakaopen na. XD ansama ko po ba? XD kaso lugi ako kasi 4k lang benta ko e ang ganda pa naman ng specs. 4gb ram tas amd pa.

 

[PHC- r3nce]

tnx sir for sharing

 

[newcomer]

ASTIG tong thread na to.

 

[khimkhitty]

number 6 problem po

 

[Brozz]

22. HARD DISK HANGS WHILE PROCESSING Check for Bad Sector by using CHKDSK or SCANDISK Command. If found format the Hard Disk and set Partition before that area.(This is the only procedure to use Hard Disk with Bad Sector) OR (To avoid Bad Sectors use Standard Power Supply)

23. HARD DISK NOT DETECTED

- - - -
help naman po sa hdd ko "HDD SAMSUNG HD502HJ 500gb". Last night nagformat pa ako using this hard disk smoothly running nman po yun pc. OS : WIN10 32BIT PRO CORE at nag installed ako nang mga importanteng software/disabled some services etc etc etc. Kabukasan pag open ko nang pc inde na po nag boboot at "Reboot and Select proper Device". So try ko sa ibang pc ganun parin pa help naman po paano irepair yun hdd or iretrieve lang yun files na importante. Ihope matulugan ninyo ako. Maraming salamat.

 

[Brozz]

22. HARD DISK HANGS WHILE PROCESSING Check for Bad Sector by using CHKDSK or SCANDISK Command. If found format the Hard Disk and set Partition before that area.(This is the only procedure to use Hard Disk with Bad Sector) OR (To avoid Bad Sectors use Standard Power Supply)

23. HARD DISK NOT DETECTED

- - - -
help naman po sa hdd ko "HDD SAMSUNG HD502HJ 500gb". Last night nagformat pa ako using this hard disk smoothly running nman po yun pc. OS : WIN10 32BIT PRO CORE at nag installed ako nang mga importanteng software/disabled some services etc etc etc. Kabukasan pag open ko nang pc inde na po nag boboot at "Reboot and Select proper Device". So try ko sa ibang pc ganun parin pa help naman po paano irepair yun hdd or iretrieve lang yun files na importante. Ihope matulugan ninyo ako. Maraming salamat.

Bago pala mag format ginawa ko po yun CHKDSK or SCANDISK ( DRIVE : C TO D.E ). PERO YUN D AND E LANG BINASA NYA ANG NAG SSCAN ON WINDOWS PERO YUN C. INDE NA INISCAN SO ? BAKA DAHIL DYAN NACORRUPT YUN WINDOWS ? . . .

 

[mags074]

thanks for the info

 

[kasimero]

PAANO PO EREPAIR YONG LOPTOP NA NAG NTDETECT FAILURE?

 

[jamerie]

boss anung issue sa cpu ko da time na clik ko power button!walang display na lumabas yung mga cooler fan ng processor at powersupply dina umiikot peru yung led umi-ilaw naman

 

[jeff80783]

thanks sa reference..:cat:

 

[joe_23]

tnx sa info boss

tnx sa info boss

 

[jieyan41]

problem ko po ang desktop ko galing s pagbootpagboot at ngselect media or boot devices and press any key. anu po ito boss?

 

[jieyan41]

boss how about sa desktop ko na, reboot and select proper media devices and press any key. na set ko na po ang first priority boot media ko ang HDD pero ganun pa rin.

 

[rhydeekharleen]

Sir patulong naman ng format ako ng desktop xp gnmit ko tpus imbis na mg proceed ito ang lumalabas
You do not have permission to view the full content of this post. Log in or register now. ... pastulong sir ano solusyon dyan..

 

[Ameril]

naayos pa ba yung corrupted memory

1. MONITOR LED IS BLINKING Check all the connections like Monitor Cable, Data cables,RAM, Display Card , CPU connections.

2. CONTINUOUS THREE BEEPS Problem in RAM Connection.

3. THREE BEEPS ( 1 Long 2 Short) Problem in Display Card Connection

4. THREE LONG BEEPS PERIOD WISE Problem in BIOS or RAM (Basic Input Output System)

5. CONTINUOS NON-STOP BEEPING Key Board Problem (I.e.; Some Key is pressed for Longer time)

6.AUTOMATIC RESTART RAM connection PSU

7. NO DISPLAY ON THE SCREEN AT ALL Hard Disk cable connected wrongly. Connect rightly seeing the Red mark (Faces power supply) and then Restart.

8. POWER LED IS OFF

a. Check main power cord b. Check S.M.P.S. c. Check Mother Board connection

9. SHOWING CMOS ERROR Replace 3 Volt battery of Mother Board . Set Original Settings Manually.(Refer CMOS Setup chart) Enter your search termsSubmit search form

10. SHOWING FDD ERROR OR FLOPPY DRIVE IS NOT WORKING PROPERLY Check Power cord of FDD , Data Cables , set CMOS & Finally the Check drive.

11. SHOWING HDD ERROR OR HARD DISK FAILURE

a. Check Power Cord b. Check connection of HDD c. Check Data cable d. Check Hard Disk parameters in CMOS or Auto detecting Setting Partitions by Fdisk Command, then format it to set track 0.

12. MOTHER BOARD HANGS DUE TO UNSTABILIZED POWER SUPPLY

a. Check S.M.P.S b. RAM not functioning properly. c. Software problem (due to using pirated software) d. CPU fan not functioning properly

13. DANCING SCREEN

a. Check Display card connection b. Virus Problem c. Video Memory Problem

14. SHAKING SCREEN

a. Earthing problem b. Magnetic waves comes around.

15. CPU CABINET SHOCK

a. Check Earthing b. Check main power cord.

16. NON-SYSTEM DISK ERROR

a. Floppy Drive having different disk (Non-Bootable Disk) OR CMOS Parameters for Hard Disk may not be set properly. b. Hard Disk Partitions may not be created. c. Hard Disk may not be formatted.

17. MISSING OPERATING SYSTEM The System files missing namely Ie; command.com} - User File IO.SYS & MS_DOS.SYS } -Hidden Files. These above three files required for Start up of the system that can be transferred by using SYS C: Command OR While the time of formatting by using Format c:/u/s

18. MISSING COMMAND INTERPRETOR May the file Command.com is corrupted OR Infected by Virus OR Some one has Erased it.

19. SHOWING I/O ERROR

a. The type of Hard Disk in CMOS may not be set properly. b. Operating system used for formatting is not valid

20. SHOWING DIVIDE OVER- FLOW MESSAGE

a. May some Directories or Files crash with other files. b. Use CHKDSK/F or SCANDISK Command to correct it.

21. HARD DISK MAKING NOISE WHILE PROCESSING

a. Unstabilized power supply. b. Check for Loose Contact. c. Do not use Y Connectors for Hard Disk. d. It may create Bad Sector OR Weak Hard Disk.

22. HARD DISK HANGS WHILE PROCESSING Check for Bad Sector by using CHKDSK or SCANDISK Command. If found format the Hard Disk and set Partition before that area.(This is the only procedure to use Hard Disk with Bad Sector) OR (To avoid Bad Sectors use Standard Power Supply)

23. HARD DISK NOT DETECTED

a. Check Power Connector b. Check Data Cables c. Check Jumpers

24. PARTITION NOT SHOWN Operating System where the Hard Disk formatted is not supported with present Mother Board. For Eg: Hard Disk formatted with Pentium System will hide their partitions for 486 System.

25. MMX/DLL FILE MISSING May the above files may be corrupted due to power failure or Virus. Make available above files from other Computer. OR Reinstall Windows 98 Operating System. (This procedure will not make any effect on existing Data).

26. WINDOWS REGISTRY ERROR This will happen due to sudden ON/OFF of the system. Final solution is to Reinstall Operating System.

27. DISPLAY COLOUR DOES NOT MATCH

a. Configure Display Card properly with their CD. b. The Standard setting for Windows is set it to 800x600 for better performance.

28. UNKNOWN DEVICE FOUND May the Driver utility is not provided with operating system . Insert Driver CD and install software for the above Device. (Every Device requires driver utility to set active

Goodluck

 

[Hikki]

Sir pa help po # 17 yung problem ko kaka upgrade kolang from win7 to win10 taz nag ka an operating system was not found..please help

 

[King Dodoy]

Sir airnel,

Please help naman. My sister has a Sony Vaio laptop. Na encountered ko palagi yun lagging. Kung nag type ako, delay yun type message. Ginawa ko, nag format ako ng laptop, still lagged. Ano po kaya hardware ang may poblema? Is this HDD, RAM or etc. Hoping your immediate response.

Mabuhay,
King Dodoy

 

[trive17]

try to restore your system boss

idol airnel patulong din ako yung desktop hindi magboot up.. may lumalabas kasing over USB using.. panu ba gagawin dun idol?? salamat po..