🔒 Closed Help desktop problem

[schedule]

baka kasi pwede ko pa itroubleshoot before going to a pc repair shop
my pc specs:

• Processor AMD A10-7860K Godavari 12 Compute Cores (4 CPU + 8 GPU) 3.6GHz
• Motherboard: MSI A68HM-E33
• Video: SAPPHIRE PULSE Radeon™ RX 550 4GB DDR5
• Memory: 16GB DDR3 1600MHz (2x8GB)
• Hardisk 1TB Toshiba SATA III
• Optical: DVDRW SATA
• Casing: Xigmatek Frontliner with Deepcool 500w Tru Rated PSU
• pc is already more than a year old
• used more on gaming

Here's the thing:
1. chambahan ang pag on ng desktop ko,meaning minsan ma switch on mo siya minsan naman wala talaga, panay no signal sa desktop.
2. pag switch on mo working naman lahat ng fan,kasama na fan ng power supply.also, na ka lit naman yung led ng motherboard. no signal lang talaga.
3.if switch on you can hear/touch the hard disk running
4.tested the memory card ok naman.
5.haven't tried testing the power supply with tester
6. windows os windows 7 ultimate(yan kasi ang me orginal os ako)
7.battery already replaced.
8.monitor is in good condition.
9. pag switch on sa power mag lit yung sa main power sa labas cpu blue led, nagbliblink red led pero saglit lang(5 secs) di tumutuloy.

hope the above info is enough for you guys to help me....
thanks in advance..

 

[PesteM DiabolicaE]

basic troubleshoot..

alisin mo yung vga cable sa pci e na videocard.. ilagay mo sa built in.. try mo if mag boboot..

then post mo dito what happen.. if you want thru call.. call me

 

[welkins]

good pm. ito lang ma i dagdag ko sa solution ng problem mo try mo i test without the power button bali pag on mo sa pc mo i short mo lang yon terminal sa mother board na naka sulat power button connection.

sana makatolong. sayu

 

[kyoshiro151]

kung marunong ka pong mag baklas at kabit ng unit mo, ganito mo tanggalin mo po yung RAM, HDD, at cd/dvd rom kung meron, tira mo lang po yun PSU na nakakabit at yung front panel kasi need mo yan sa pagbukas ng unit mo at paki check kung merong speaker yung motherboard mo sir, bka naka insert lang yan sa motherboard or sa case, need natin yan para sa response ng motherboard, paki on ng unit mo at magabang ka ng POST beep, para malaman natin na nagrereact or nagreresponse pa ang mobo...or motherboard...if walang response maaring motherboard na or yung mayproblema, processor kasi matagal yan masira so maaring na short ang motherboard mo or bumigay na