PH4/07/24 Update 1 tap NoLoad | What's New | DKA System new Version 3.4.0 | The most accurate vpn partner | Friendly GUI | New Added Features
Q1)
What you should do to avoid encountering issues using DKA System?
A1)
You should carefully re-read all steps and feedbacks from old versions to new versions, skip only if already done reviews.
Q2)
Is it necessary to re-read thread posts?
A2)
Yes, because of realtime updates in feedback's and thread's post updates.
Q3)
What happens when you enable or disable Ping Time?
A3)
The Ping Time feature is used to establish a reference point for achieving zero ping results in the VPN configuration with 1-tap connection in DKASYSTEM. When you disable Ping Time, it allows for faster loop times by bypassing the verification process for already successful zero ping times. This helps in swiftly checking all IPs and DNS entries within DKASYSTEM in Termux.
For more ->.Details
STEP TO DO:
Step1
3/24/24 Updated DKA System Instructions in the html page link.
Install termux app
You do not have permission to view the full content of this post. Log in or register now.
or
Manually:
Input mo ito sa termux app
then hit enter
wait until it showing
type "startgtm"
Step2
Create ka ng account sa mga ssh site, piliin mo yung slowdns or v2ray dns then i-copy mo yung NS or Nameserver ng created account mo.
If you see in the termux screen message
type "startgtm"
then
type it
then hit enter
if not
try this:
termux-setup-storage
then
hit enter
(you should allow permission "y")
then
type
startgtm
then
hit enter
then
Select option 1 then 1
add mo pinaka malakas, para sa ping target address. For ex. 8.8.8.8
then hit enter
then
Select option 2 then 1
paste mo Nameserver(NS) ng account mo.
then hit enter
then
Select option 3 then 1
Paste mo dns IP ng device mo (kung hindi alam ang DNS IP ng config na naka-lock, yung 124.6.181.25 DNS default ng gtm ang i-add mo Or hunt ka na lang kung config owner ka).
then
Select option 7 if you want to enable/disable ping time.
then
hit enter
then
Select option 8
then choose between 2-15 for loop delay
then hit enter
then
Select option 9
to execute.
then hit enter
You should see a "begin" message.
then
if the termux screen showing result "success" and ping result is zero, you are successfully in a stab connection status (Pag nagpula sa status at ping zero huwag ka munang mag eruplano, hintayin yung next test, pag green status at ping zero, one tap connected yan.) Pag hindi pa, ituloy lang ang eruplano on/off.
Last step
Set the vpn app with your own config, account for example:
Account by Codered;
Account by Arjien
then
Set vpn to bypass apps with your choice for ex. termux.
then
Connect your config in your vpn app, partner with dkasystem on termux app.
Q1) Bakit kelangan i-bypass ang termux sa pinoproxy-han ng vpn?
A1) Dahil magkaka error sa DKA system sa termux, magigimg failed na lahat ang result kung gumagamit ng noload setup sa vpn app, maliban na lamang kung may load or connected sa may net na wifi.
Q2) Kailangan ba ng net para ma-update si DKA System?
A2) Yes kelangan, kung si termux ay binay-pass ni vpn, hindi makaka-download ng mga installer or updates para kay termux, maliban na kung may net/load at off muna si vpn OR off muna ang bypass mode para sa lahat ng apps including termux upang ma-proxy-han.
Q3)
A3)
google or dns IP ng malalakas na server yung mga free DNS.
Q4)
A4)
re-install mo, huwag mo skip, saka mo na lang skip kung na install na mga repo at si dkasystem. then sa next reinstall ng future updates version ng DKASYSTEM pwede na skip mga installed repo, at siguruhin mo yung storage permission ay "Y" or "y"
Q5)
A5)
future updates, pwede nang idisabled ang ping, pero sa ping nalalaman kung goods na yung device IP mo.
Q6)
Ano ang primarily na dapat gawing ping target?
A6)
default ping IPs, tulad ng 0.0.0.0, 127.0.0.1, device ip address, google dns, cloudflare dns, secondary (optional) domain IPs like You do not have permission to view the full content of this post. Log in or register now..
Q7)
Ano naman para sa nameserver?
A7)
Yung copy mo mula sa server kung saan ka gumawa ng account (vpn account).
Q8)
Ano naman para sa dns IP?
Q8)
Yung copy mo mula sa bug hunting tulad ng 124.6.181.x or 112.198.111.x etc. (It is just a sample dns IPs, hunt for your own bug dns IPs).
Q9)
What will happen if Enabling or Disabling Ping Time?
A9)
Ping Time is for determining zero ping result for VPN config 1 tap connected feature of DKASYSTEM.
While Disabling Ping, if already in a state of success zero ping time, to accelerate loop time, for rapid checking every IPs or DNS entries in DKASYSTEM in termux.
Q10)
A10)
hindi ko sinet para lumampas sa 50ms ang result kaya pag ang ping 50 pataas failed na yung ping result and back to zero na lang
DEV:
by xXmartoXx and carmona1426
Features & Bug fixes:
Old Version 2.4.5
1) User can now skip installing termux repo N or Y.
2) User can add multiple inputs one line with space or one list.
3) User can now assured only IPs or Domains will be added into system.
4) Easy to install in termux (If storage is permitted to store data - command
5) The only accurate and powerful tool for dnstt combined with pinger
6) Bug fixed in testing, Now it can show 1 by 1 testing for each inputs.
7) It gives a realtime result while turning airplane mode off/on.
8) VPN Config is now one tap connected if the result shows "green success and zero ping".
9) The all time partner for your vpn config NoLoad no Block.
10) With Options, navigate is easy.
New Version 3.2.7
1) Added new options to edit the stored data.
2) Can change the line location of entries in the stored data.
3) No difficulties in adding, changing, deleting, and merging existing entries in the data.
4) Toggle to Ping Enable/Disable while in looping time, Press "Enter" to Disable or Enable P8ng Time.
5) Added in Home menu an option to Disable/Enable Ping Time.
Done updated plan Ver.3.2.7:
1) User can disable ping functionality.
2) User can select option to hide the screen display results specially for DNS IPs, Nameservers amd Ping IPs
Thread edit: Mar 12, 2024.
1) Expired dkasystem (updated expiration date).
2) Expired token (updated token expiration date).
3) "Command not found" (fixed)
Version 3.4.0 (released)
Reinstall now!
Thread edit: Feb 28, 2024.
1) Expired dkasystem (updated expiration date).
2) Expired token (updated token expiration date).
Version 3.3.9 (released)
Reinstall now!
Thread Edit: Reason - fixed in:
1) Ping disabled issue.
2) Text colors and alignments.
3) Feature of switching line on the list (fixed).
4) Error in handling file does not exist for first time use (fixed - Script can auto generate random "sample" inputs if the user does not provide any).
5) Set for loop delay is now can be saved. (No need to set the loop delay every session.)
Done update.
Until next UPDATES
Keep giving a feedback to enjoy more DEV.
Special thanks din kay co-dev carmona1426
Q1)
What you should do to avoid encountering issues using DKA System?
A1)
You should carefully re-read all steps and feedbacks from old versions to new versions, skip only if already done reviews.
Q2)
Is it necessary to re-read thread posts?
A2)
Yes, because of realtime updates in feedback's and thread's post updates.
Q3)
What happens when you enable or disable Ping Time?
A3)
The Ping Time feature is used to establish a reference point for achieving zero ping results in the VPN configuration with 1-tap connection in DKASYSTEM. When you disable Ping Time, it allows for faster loop times by bypassing the verification process for already successful zero ping times. This helps in swiftly checking all IPs and DNS entries within DKASYSTEM in Termux.
For more ->.Details
STEP TO DO:
Step1
3/24/24 Updated DKA System Instructions in the html page link.
Install termux app
You do not have permission to view the full content of this post. Log in or register now.
or
Manually:
Input mo ito sa termux app
Code:
curl -sL https://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@raw.githubusercontent.com/agent0002/dev-xxmartoxx-carmona-gtm-stab/main/gtm-mainstart.sh -o "$PREFIX/bin/gtm-mainstart" && chmod +x "$PREFIX/bin/gtm-mainstart" && gtm-mainstartthen hit enter
wait until it showing
type "startgtm"
Step2
Create ka ng account sa mga ssh site, piliin mo yung slowdns or v2ray dns then i-copy mo yung NS or Nameserver ng created account mo.
If you see in the termux screen message
type "startgtm"
then
type it
then hit enter
if not
try this:
termux-setup-storage
then
hit enter
(you should allow permission "y")
then
type
startgtm
then
hit enter
then
Select option 1 then 1
add mo pinaka malakas, para sa ping target address. For ex. 8.8.8.8
then hit enter
then
Select option 2 then 1
paste mo Nameserver(NS) ng account mo.
then hit enter
then
Select option 3 then 1
Paste mo dns IP ng device mo (kung hindi alam ang DNS IP ng config na naka-lock, yung 124.6.181.25 DNS default ng gtm ang i-add mo Or hunt ka na lang kung config owner ka).
then
Select option 7 if you want to enable/disable ping time.
then
hit enter
then
Select option 8
then choose between 2-15 for loop delay
then hit enter
then
Select option 9
to execute.
then hit enter
You should see a "begin" message.
then
if the termux screen showing result "success" and ping result is zero, you are successfully in a stab connection status (Pag nagpula sa status at ping zero huwag ka munang mag eruplano, hintayin yung next test, pag green status at ping zero, one tap connected yan.) Pag hindi pa, ituloy lang ang eruplano on/off.
Last step
Set the vpn app with your own config, account for example:
Account by Codered;
Code:
DNS : use your own working dns.
Nameserver: sg.codered-servers.online
Public Key: 1e325866062157829d5ec20e8b6104c766b35dd5fbb9c329aef2bcbc76ab1948
Account: codered:codered
In http custom:
✔ Enable DNS, ✔ SlowDNS.Account by Arjien
Code:
DNS : use your own working dns.
Nameserver: zein.xquic.site
Public Key: b2996478e1a1f1b3c4451e0196d65aab0f216943d8560b7f056df06274429a58
User/Pass: arjienx:arjienx
Port:443
In http custom:
✔ Enable DNS, ✔ SSL, ✔ SlowDNS.then
Set vpn to bypass apps with your choice for ex. termux.
then
Connect your config in your vpn app, partner with dkasystem on termux app.
Q1) Bakit kelangan i-bypass ang termux sa pinoproxy-han ng vpn?
A1) Dahil magkaka error sa DKA system sa termux, magigimg failed na lahat ang result kung gumagamit ng noload setup sa vpn app, maliban na lamang kung may load or connected sa may net na wifi.
Q2) Kailangan ba ng net para ma-update si DKA System?
A2) Yes kelangan, kung si termux ay binay-pass ni vpn, hindi makaka-download ng mga installer or updates para kay termux, maliban na kung may net/load at off muna si vpn OR off muna ang bypass mode para sa lahat ng apps including termux upang ma-proxy-han.
Q3)
A3)
google or dns IP ng malalakas na server yung mga free DNS.
Q4)
A4)
re-install mo, huwag mo skip, saka mo na lang skip kung na install na mga repo at si dkasystem. then sa next reinstall ng future updates version ng DKASYSTEM pwede na skip mga installed repo, at siguruhin mo yung storage permission ay "Y" or "y"
Code:
termux-setup-storageQ5)
A5)
future updates, pwede nang idisabled ang ping, pero sa ping nalalaman kung goods na yung device IP mo.
Q6)
Ano ang primarily na dapat gawing ping target?
A6)
default ping IPs, tulad ng 0.0.0.0, 127.0.0.1, device ip address, google dns, cloudflare dns, secondary (optional) domain IPs like You do not have permission to view the full content of this post. Log in or register now..
Q7)
Ano naman para sa nameserver?
A7)
Yung copy mo mula sa server kung saan ka gumawa ng account (vpn account).
Q8)
Ano naman para sa dns IP?
Q8)
Yung copy mo mula sa bug hunting tulad ng 124.6.181.x or 112.198.111.x etc. (It is just a sample dns IPs, hunt for your own bug dns IPs).
Q9)
What will happen if Enabling or Disabling Ping Time?
A9)
Ping Time is for determining zero ping result for VPN config 1 tap connected feature of DKASYSTEM.
While Disabling Ping, if already in a state of success zero ping time, to accelerate loop time, for rapid checking every IPs or DNS entries in DKASYSTEM in termux.
Q10)
A10)
hindi ko sinet para lumampas sa 50ms ang result kaya pag ang ping 50 pataas failed na yung ping result and back to zero na lang
DEV:
by xXmartoXx and carmona1426
Features & Bug fixes:
Old Version 2.4.5
1) User can now skip installing termux repo N or Y.
2) User can add multiple inputs one line with space or one list.
3) User can now assured only IPs or Domains will be added into system.
4) Easy to install in termux (If storage is permitted to store data - command
Code:
termux-setup-storage5) The only accurate and powerful tool for dnstt combined with pinger
6) Bug fixed in testing, Now it can show 1 by 1 testing for each inputs.
7) It gives a realtime result while turning airplane mode off/on.
8) VPN Config is now one tap connected if the result shows "green success and zero ping".
9) The all time partner for your vpn config NoLoad no Block.
10) With Options, navigate is easy.
New Version 3.2.7
1) Added new options to edit the stored data.
2) Can change the line location of entries in the stored data.
3) No difficulties in adding, changing, deleting, and merging existing entries in the data.
4) Toggle to Ping Enable/Disable while in looping time, Press "Enter" to Disable or Enable P8ng Time.
5) Added in Home menu an option to Disable/Enable Ping Time.
Done updated plan Ver.3.2.7:
1) User can disable ping functionality.
2) User can select option to hide the screen display results specially for DNS IPs, Nameservers amd Ping IPs
Thread edit: Mar 12, 2024.
1) Expired dkasystem (updated expiration date).
2) Expired token (updated token expiration date).
3) "Command not found" (fixed)
Version 3.4.0 (released)
Reinstall now!
Thread edit: Feb 28, 2024.
1) Expired dkasystem (updated expiration date).
2) Expired token (updated token expiration date).
Version 3.3.9 (released)
Reinstall now!
Thread Edit: Reason - fixed in:
1) Ping disabled issue.
2) Text colors and alignments.
3) Feature of switching line on the list (fixed).
4) Error in handling file does not exist for first time use (fixed - Script can auto generate random "sample" inputs if the user does not provide any).
5) Set for loop delay is now can be saved. (No need to set the loop delay every session.)
Done update.
Until next UPDATES
Keep giving a feedback to enjoy more DEV.
Special thanks din kay co-dev carmona1426
