PHScan your PC for Malware
1.Malware or a virus on your PC can often be the cause of many issues on your PC, let alone be a huge security risk. You should do a full scan of your PC with an AV program like 𝐌𝐚𝐥𝐰𝐚𝐫𝐞𝐛𝐲𝐭𝐞𝐬 Anti-Malware Free, and remove any found threats. If you need help with an infected PC issue, then please create a new thread in our You do not have permission to view the full content of this post. Log in or register now. forum area for one of our security experts to take a look at it.
2. Install More and/or Faster RAM
The more You do not have permission to view the full content of this post. Log in or register now. (memory) you have, the better your performance can be up to a point. Usually 4 GB (32-bit) or 8 GB (64-bit) will be the sweet spot and plenty unless you do memory intensive actions such as video editing or a lot of multitasking.
Memory performance will depend on fast the bandwidth MHZ rating (higher the better) is, and if you are using You do not have permission to view the full content of this post. Log in or register now. in You do not have permission to view the full content of this post. Log in or register now. mode instead of just one or a mix of RAM sticks in only single channel mode. It's best to have all of your RAM sticks with the exact same specs.
You will need to check your motherboard specs to see how much and what type of RAM it supports.
3. Use a You do not have permission to view the full content of this post. Log in or register now. (Solid State Drive) instead of You do not have permission to view the full content of this post. Log in or register now. (Hard Disk Drive)
Installing Windows 10 on a SSD will give you a dramatic increase in performance over a HDD.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
4. Upgrade to a Better Video Graphics Card
If you're a gamer, then upgrading your video card to a better one can give you much better You do not have permission to view the full content of this post. Log in or register now. (frames per second) and performance. In some situations, better video cards can be a huge benefit even without heavy onscreen video work, because certain applications can leverage the GPUs for calculations. If your current card and motherboard support You do not have permission to view the full content of this post. Log in or register now. or You do not have permission to view the full content of this post. Log in or register now., adding a second card and bridging them will be a good option as well.
5. Install the Latest BIOS and Device Drivers
Make sure that you have the latest available drivers installed for all of your devices, and BIOS version for your motherboard. These will often have updates that correct new bugs, bugs from the previous versions, and may add new features, and increase performance. You can get them at your device manufacturer's website. The release notes (if available) of the driver or BIOS version will tell you what changes have been made since the last version to see if you wish to install it or not. Be sure to have the correct versions for your You do not have permission to view the full content of this post. Log in or register now. Windows 10.
6. You do not have permission to view the full content of this post. Log in or register now.
Microsoft usually releases important updates on the second Tuesday once a month. However, updates could be released at any time. You should check for and install available Windows Updates that could include bug fixes, security patches, Windows Defender definitions, etc.... that could help keep stable and/or improve the performance of Windows.
7. Use a Faster DNS Server
Most ISPs like to brag about how much bandwidth they are giving you, but they don't mind letting the rest of their infrastructure slowly get overwhelmed or deteriorate. Among the biggest offenders are the DNS servers our ISPs use. If you want to know why things seem to take forever to start loading, slow DNS servers are often the cause. You might consider adding or using a fast DNS server like You do not have permission to view the full content of this post. Log in or register now. as your primary DNS server in your TCP/IP settings to see how it compares to your ISP.
8. Use the "High Performance" You do not have permission to view the full content of this post. Log in or register now.
The "High performance" power scheme plan maximizes system performance and responsiveness. However, if you use a mobile PC running on battery power, then you will notice that your battery doesn't last as long while using this plan. You can adjust your You do not have permission to view the full content of this post. Log in or register now. to fit your needs.
Caution: Using the "High performance" power scheme may cause some laptops to run hotter than normal.
9. Turn On You do not have permission to view the full content of this post. Log in or register now. for a Hybrid Boot/Shutdown
Fast startup (aka: hiberboot, hybrid boot, or hybrid shutdown) is turned on by default in Windows and is a setting that helps your PC start up faster after shutdown. Even faster than hibernate. Windows does this by saving an image of the Windows kernel and loaded drivers to the hiberfile (C:\hiberfil.sys) upon shutdown so when you start your PC again, Windows simply loads the hiberfile (C:\hiberfil.sys) into memory to resume your PC instead of restarting it.
10. Turn On You do not have permission to view the full content of this post. Log in or register now.
The Fast Boot feature for UEFI motherboards has a Fast and Ultra Fast option that allows your PC to boot much faster than normal.
11. Disable or Reduce Hibernate if Not Used
If you do not use You do not have permission to view the full content of this post. Log in or register now. or You do not have permission to view the full content of this post. Log in or register now., then You do not have permission to view the full content of this post. Log in or register now. will save you a GB+ size file from being saved on your hard drive when you hibernate the PC. When hibernate is disabled, the shut down time will also be shorter by not having to wait on memory being saved to the hiberfil.sys file.
If you do not use You do not have permission to view the full content of this post. Log in or register now. and want to use You do not have permission to view the full content of this post. Log in or register now., then you can You do not have permission to view the full content of this post. Log in or register now. to significantly reduce the size of the hiberfile (C:\hiberfil.sys) to about half of its full size.
12. Turn Off Unneeded You do not have permission to view the full content of this post. Log in or register now.
You can optimize performance by changing how menus and windows appear. Uncheck the visual effect options that you do not want or need, or select the Adjust for best performance option, to help performance. The most common visual effects to uncheck are:
13. Speed Up Windows Shut Down Time
You can set and adjust the You do not have permission to view the full content of this post. Log in or register now., You do not have permission to view the full content of this post. Log in or register now., You do not have permission to view the full content of this post. Log in or register now., and/or You do not have permission to view the full content of this post. Log in or register now. values for how long Windows waits for hung programs and other programs to save data and close before shutting down.
14. You do not have permission to view the full content of this post. Log in or register now.
If you have more than one operating system installed along with Windows 10 for a dual or multi boot system, then you could change the amount of time you wait before the You do not have permission to view the full content of this post. Log in or register now. runs automatically at startup, or until you select an OS to run.
15. Enable You do not have permission to view the full content of this post. Log in or register now. for Storage Devices
This option is usually the best choice to use for storage devices that must provide the highest possible performance, and that you intend to not remove from the system frequently, such as internal hard disk drives.
16. You do not have permission to view the full content of this post. Log in or register now.
Moving the page file to a second physical hard drive instead of the same C: drive that Windows is on can help improve the performance of Windows if the other hard drive is at least as fast or faster than the Windows drive. Doing this allows Windows to use the page file on one drive while not having to interrupt reads or writes on the Windows drive. Be sure to let the page file be System Managed. Windows does a great job of keeping your page file in peak condition and performance.
17. You do not have permission to view the full content of this post. Log in or register now.
Most OEM computers that you buy at a retail outlet have a ton of bloatware and trial software installed on it. Some of these can take up a lot of resources. Uninstall the programs that you do not use from Programs and Features.
18. Disable or Delete Unneeded You do not have permission to view the full content of this post. Log in or register now.
Startup items are the programs, shortcuts, folders, drivers, etc... that are set to run automatically at startup when a user signs in to Windows 8. Disabling or deleting them from running at startup can improve startup time and reduce the amount of system resources being be used by them. It is also a good idea to check your startup items every once in awhile to help make sure that some unknown program or malware has not placed itself to run at the startup of Windows.
19. Set Unused You do not have permission to view the full content of this post. Log in or register now. to Manual or Disabled
Services use processes that run in the background using part of your computer's resources. Check through your services with the help of the guide provided in this link, and stop and set to manual the services that affects features that you do not use or need to gain a tiny bit more performance.
WARNING: Disabling the wrong service could hurt performance, or even cripple Windows. If you do not truly know what you are doing, then it's highly recommended to not do this.
20. You do not have permission to view the full content of this post. Log in or register now.
If you are the only one that uses your home PC, then you could set Windows to automatically sign in to your user account at startup to save you time from having to manually sign in.
You may also wish to do this:
WARNING: Doing this will also allow anyone with access to your PC to be automatically signed in to your user account if they startup Windows.
21. You do not have permission to view the full content of this post. Log in or register now.
Disabling or uninstalling any unneeded installed add-ons in Internet Explorer will help the performance of Internet Explorer.
22. Disable You do not have permission to view the full content of this post. Log in or register now. for New Users
While the first sign-in animation may be helpful to new users to see when they sign-in for the first time, disabling the first sign-in animation will give a faster new account preparation time.
23. Change You do not have permission to view the full content of this post. Log in or register now. Settings and Time
Maintenance activity in Windows is designed to run in the background with limited user interaction and minimal impact to performance and energy efficiency. You should change the Automatic Maintenance to what time you want to run the daily maintenance tasks, and if to allow the scheduled maintenance to wake the computer to run at the scheduled time. It's best to set the time to when you will not be using the computer, but when the computer is still turned on or asleep if set to wake up.
You might also:
By default, Optimize Drives runs You do not have permission to view the full content of this post. Log in or register now. (if turned on) during the time you have set for You do not have permission to view the full content of this post. Log in or register now.. However, you should check and optimize your drives at least once a week to keep them from being defragmented and performing well.
25. You do not have permission to view the full content of this post. Log in or register now.
This reduce the amount of time it takes for a menu in Windows to pop, fade, or slide open when you run the mouse pointer over it.
26. Keep your Index Enabled and Updated, or Disable the Index
Your needs for the index, searches, and libraries will determine what will be best for you. The indexing service helps to make the search function in Windows 8 run much faster. However, it can also drain your computer’s hardware resources, particularly on older machines.
By default the index is enabled in Windows. If you do a lot of searches in specific locations or for specific file types, then searching using the index with these You do not have permission to view the full content of this post. Log in or register now. and You do not have permission to view the full content of this post. Log in or register now. added to be included in the index could help give you faster search results than doing non index searches. If you find that the index search results are not accurate, then You do not have permission to view the full content of this post. Log in or register now. will update the index for accurate search results afterwards.
If you like to only do non index searches to always have accurate search results, then you could either You do not have permission to view the full content of this post. Log in or register now. or set your You do not have permission to view the full content of this post. Log in or register now. to not use the index when searching in file folders for system files. Non index searches will take a bit longer to give search results. If you disable the index, then this will help your hard drive not run as much while the index (if enabled) automatically updates itself in the background when your computer is idle. If you disable the index, you will also no longer be able to search within libraries.
27. You do not have permission to view the full content of this post. Log in or register now.
While having your HDDs turn off after set x amount of idle minutes can help save energy, it can also cause your PC to pause while waiting for the HDD to spin back up when needed. You could either set this to never turn off the HDDs, or increase the amount of idle minutes before turning off the HDDs to avoid it being turned off while you may still need it and have to wait for it to spin back up as often.
28. Clean Your PC
Keeping the fans and inside of your computer clean and dust free can help prevent performance issues. Dust acts as an insulator, making it harder for your hardware to dissipate the buildup of heat. When this problem becomes significant enough for your computer to overheat, certain components such as your processor or graphics card may temporarily throttle back their clock speeds in order to prevent damage to your hardware.
29. Set You do not have permission to view the full content of this post. Log in or register now. of a Process
By default, Windows shares the processor time between all running processes based upon their priority level. If a process has a higher priority, it gets more processor time compared to a process having a lower priority.
You could set priority of an application or process to run with a Realtime, High, Above Normal, Normal, Below Normal, or Low processor priority level. You could have a task from an application or process finish faster by giving it a higher priority level, or by setting a non urgent task to a lower priority level to allow other tasks to have more priority.
30. You do not have permission to view the full content of this post. Log in or register now.
Internet Explorer has a limit for the amount of simultaneously downloads per website or server.
In addition, if you visit a website with lots of images (and supporting files like CSS styles and Javascript), then you could have a slower browsing experience. On average, your browser could have to make several requests to the site's server before it can finish loading the page. Requesting all the files needed to download with the default 8 (ex: IE11) at a time is going to be slower than requesting say 16 files at a time.
As internet connection speeds increase, the default number of simultaneous downloads to a single website or server may be to restrictive and not meet your needs.
31. Run You do not have permission to view the full content of this post. Log in or register now. to Free Hard Drive Space
Running Disk Cleanup every so often will help find and remove unnecessary files on your hard disk to free up disk space and help your computer run faster.
32. You do not have permission to view the full content of this post. Log in or register now.
This will let you change how long to show notifications above the taskbar notification area before they automatically close.
33. You do not have permission to view the full content of this post. Log in or register now.
Windows 10 introduces a new battery saver feature that conserves your PC's battery by limiting background activity and adjusting hardware settings. Battery saver will turn on automatically if you like, but you can also turn it on manually. You can add or remove apps to an always allowed list to always run in the background, even when Batter Saver is on.
34. You do not have permission to view the full content of this post. Log in or register now.
The TRIM command is essential to maintain the performance of solid state drives (SSDs) at an optimal level over the lifetime of the drive. It is recommended to verify and make sure TRIM support is enabled.
35. You do not have permission to view the full content of this post. Log in or register now.
Checking your drives for errors every once in a while can help fix some performance issues. Drive errors can usually be caused by bad sectors, improper shutdowns, bad software, corruption, physical damage, etc...
36. You do not have permission to view the full content of this post. Log in or register now.
By default, Windows will run the items in your Startup folder (shell:startup) after about a 10 second delay at Windows startup when you sign-in to your account. This was done to help improve the performance of Windows startup. If you have a fast computer, then you may wish to disable this startup delay to have your startup items run as soon as you sign-in instead delayed.
1.Malware or a virus on your PC can often be the cause of many issues on your PC, let alone be a huge security risk. You should do a full scan of your PC with an AV program like 𝐌𝐚𝐥𝐰𝐚𝐫𝐞𝐛𝐲𝐭𝐞𝐬 Anti-Malware Free, and remove any found threats. If you need help with an infected PC issue, then please create a new thread in our You do not have permission to view the full content of this post. Log in or register now. forum area for one of our security experts to take a look at it.
2. Install More and/or Faster RAM
The more You do not have permission to view the full content of this post. Log in or register now. (memory) you have, the better your performance can be up to a point. Usually 4 GB (32-bit) or 8 GB (64-bit) will be the sweet spot and plenty unless you do memory intensive actions such as video editing or a lot of multitasking.
Memory performance will depend on fast the bandwidth MHZ rating (higher the better) is, and if you are using You do not have permission to view the full content of this post. Log in or register now. in You do not have permission to view the full content of this post. Log in or register now. mode instead of just one or a mix of RAM sticks in only single channel mode. It's best to have all of your RAM sticks with the exact same specs.
You will need to check your motherboard specs to see how much and what type of RAM it supports.
3. Use a You do not have permission to view the full content of this post. Log in or register now. (Solid State Drive) instead of You do not have permission to view the full content of this post. Log in or register now. (Hard Disk Drive)
Installing Windows 10 on a SSD will give you a dramatic increase in performance over a HDD.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
4. Upgrade to a Better Video Graphics Card
If you're a gamer, then upgrading your video card to a better one can give you much better You do not have permission to view the full content of this post. Log in or register now. (frames per second) and performance. In some situations, better video cards can be a huge benefit even without heavy onscreen video work, because certain applications can leverage the GPUs for calculations. If your current card and motherboard support You do not have permission to view the full content of this post. Log in or register now. or You do not have permission to view the full content of this post. Log in or register now., adding a second card and bridging them will be a good option as well.
5. Install the Latest BIOS and Device Drivers
Make sure that you have the latest available drivers installed for all of your devices, and BIOS version for your motherboard. These will often have updates that correct new bugs, bugs from the previous versions, and may add new features, and increase performance. You can get them at your device manufacturer's website. The release notes (if available) of the driver or BIOS version will tell you what changes have been made since the last version to see if you wish to install it or not. Be sure to have the correct versions for your You do not have permission to view the full content of this post. Log in or register now. Windows 10.
6. You do not have permission to view the full content of this post. Log in or register now.
Microsoft usually releases important updates on the second Tuesday once a month. However, updates could be released at any time. You should check for and install available Windows Updates that could include bug fixes, security patches, Windows Defender definitions, etc.... that could help keep stable and/or improve the performance of Windows.
7. Use a Faster DNS Server
Most ISPs like to brag about how much bandwidth they are giving you, but they don't mind letting the rest of their infrastructure slowly get overwhelmed or deteriorate. Among the biggest offenders are the DNS servers our ISPs use. If you want to know why things seem to take forever to start loading, slow DNS servers are often the cause. You might consider adding or using a fast DNS server like You do not have permission to view the full content of this post. Log in or register now. as your primary DNS server in your TCP/IP settings to see how it compares to your ISP.
8. Use the "High Performance" You do not have permission to view the full content of this post. Log in or register now.
The "High performance" power scheme plan maximizes system performance and responsiveness. However, if you use a mobile PC running on battery power, then you will notice that your battery doesn't last as long while using this plan. You can adjust your You do not have permission to view the full content of this post. Log in or register now. to fit your needs.
Caution: Using the "High performance" power scheme may cause some laptops to run hotter than normal.
9. Turn On You do not have permission to view the full content of this post. Log in or register now. for a Hybrid Boot/Shutdown
Fast startup (aka: hiberboot, hybrid boot, or hybrid shutdown) is turned on by default in Windows and is a setting that helps your PC start up faster after shutdown. Even faster than hibernate. Windows does this by saving an image of the Windows kernel and loaded drivers to the hiberfile (C:\hiberfil.sys) upon shutdown so when you start your PC again, Windows simply loads the hiberfile (C:\hiberfil.sys) into memory to resume your PC instead of restarting it.
10. Turn On You do not have permission to view the full content of this post. Log in or register now.
The Fast Boot feature for UEFI motherboards has a Fast and Ultra Fast option that allows your PC to boot much faster than normal.
11. Disable or Reduce Hibernate if Not Used
If you do not use You do not have permission to view the full content of this post. Log in or register now. or You do not have permission to view the full content of this post. Log in or register now., then You do not have permission to view the full content of this post. Log in or register now. will save you a GB+ size file from being saved on your hard drive when you hibernate the PC. When hibernate is disabled, the shut down time will also be shorter by not having to wait on memory being saved to the hiberfil.sys file.
If you do not use You do not have permission to view the full content of this post. Log in or register now. and want to use You do not have permission to view the full content of this post. Log in or register now., then you can You do not have permission to view the full content of this post. Log in or register now. to significantly reduce the size of the hiberfile (C:\hiberfil.sys) to about half of its full size.
12. Turn Off Unneeded You do not have permission to view the full content of this post. Log in or register now.
You can optimize performance by changing how menus and windows appear. Uncheck the visual effect options that you do not want or need, or select the Adjust for best performance option, to help performance. The most common visual effects to uncheck are:
- Animate controls and elements inside windows
- Animate windows when minimizing and maximizing
- Animations in the taskbar
- Fade or slide menus into view
- Fade or slide ToolTips into view
- Fade out menu items after clicking
- Show shadows under windows
- Slide open combo boxes
13. Speed Up Windows Shut Down Time
You can set and adjust the You do not have permission to view the full content of this post. Log in or register now., You do not have permission to view the full content of this post. Log in or register now., You do not have permission to view the full content of this post. Log in or register now., and/or You do not have permission to view the full content of this post. Log in or register now. values for how long Windows waits for hung programs and other programs to save data and close before shutting down.
14. You do not have permission to view the full content of this post. Log in or register now.
If you have more than one operating system installed along with Windows 10 for a dual or multi boot system, then you could change the amount of time you wait before the You do not have permission to view the full content of this post. Log in or register now. runs automatically at startup, or until you select an OS to run.
15. Enable You do not have permission to view the full content of this post. Log in or register now. for Storage Devices
This option is usually the best choice to use for storage devices that must provide the highest possible performance, and that you intend to not remove from the system frequently, such as internal hard disk drives.
16. You do not have permission to view the full content of this post. Log in or register now.
Moving the page file to a second physical hard drive instead of the same C: drive that Windows is on can help improve the performance of Windows if the other hard drive is at least as fast or faster than the Windows drive. Doing this allows Windows to use the page file on one drive while not having to interrupt reads or writes on the Windows drive. Be sure to let the page file be System Managed. Windows does a great job of keeping your page file in peak condition and performance.
17. You do not have permission to view the full content of this post. Log in or register now.
Most OEM computers that you buy at a retail outlet have a ton of bloatware and trial software installed on it. Some of these can take up a lot of resources. Uninstall the programs that you do not use from Programs and Features.
18. Disable or Delete Unneeded You do not have permission to view the full content of this post. Log in or register now.
Startup items are the programs, shortcuts, folders, drivers, etc... that are set to run automatically at startup when a user signs in to Windows 8. Disabling or deleting them from running at startup can improve startup time and reduce the amount of system resources being be used by them. It is also a good idea to check your startup items every once in awhile to help make sure that some unknown program or malware has not placed itself to run at the startup of Windows.
19. Set Unused You do not have permission to view the full content of this post. Log in or register now. to Manual or Disabled
Services use processes that run in the background using part of your computer's resources. Check through your services with the help of the guide provided in this link, and stop and set to manual the services that affects features that you do not use or need to gain a tiny bit more performance.
WARNING: Disabling the wrong service could hurt performance, or even cripple Windows. If you do not truly know what you are doing, then it's highly recommended to not do this.
20. You do not have permission to view the full content of this post. Log in or register now.
If you are the only one that uses your home PC, then you could set Windows to automatically sign in to your user account at startup to save you time from having to manually sign in.
You may also wish to do this:
- You do not have permission to view the full content of this post. Log in or register now.
WARNING: Doing this will also allow anyone with access to your PC to be automatically signed in to your user account if they startup Windows.
21. You do not have permission to view the full content of this post. Log in or register now.
Disabling or uninstalling any unneeded installed add-ons in Internet Explorer will help the performance of Internet Explorer.
22. Disable You do not have permission to view the full content of this post. Log in or register now. for New Users
While the first sign-in animation may be helpful to new users to see when they sign-in for the first time, disabling the first sign-in animation will give a faster new account preparation time.
23. Change You do not have permission to view the full content of this post. Log in or register now. Settings and Time
Maintenance activity in Windows is designed to run in the background with limited user interaction and minimal impact to performance and energy efficiency. You should change the Automatic Maintenance to what time you want to run the daily maintenance tasks, and if to allow the scheduled maintenance to wake the computer to run at the scheduled time. It's best to set the time to when you will not be using the computer, but when the computer is still turned on or asleep if set to wake up.
You might also:
- You do not have permission to view the full content of this post. Log in or register now.
- You do not have permission to view the full content of this post. Log in or register now.
By default, Optimize Drives runs You do not have permission to view the full content of this post. Log in or register now. (if turned on) during the time you have set for You do not have permission to view the full content of this post. Log in or register now.. However, you should check and optimize your drives at least once a week to keep them from being defragmented and performing well.
25. You do not have permission to view the full content of this post. Log in or register now.
This reduce the amount of time it takes for a menu in Windows to pop, fade, or slide open when you run the mouse pointer over it.
26. Keep your Index Enabled and Updated, or Disable the Index
Your needs for the index, searches, and libraries will determine what will be best for you. The indexing service helps to make the search function in Windows 8 run much faster. However, it can also drain your computer’s hardware resources, particularly on older machines.
By default the index is enabled in Windows. If you do a lot of searches in specific locations or for specific file types, then searching using the index with these You do not have permission to view the full content of this post. Log in or register now. and You do not have permission to view the full content of this post. Log in or register now. added to be included in the index could help give you faster search results than doing non index searches. If you find that the index search results are not accurate, then You do not have permission to view the full content of this post. Log in or register now. will update the index for accurate search results afterwards.
If you like to only do non index searches to always have accurate search results, then you could either You do not have permission to view the full content of this post. Log in or register now. or set your You do not have permission to view the full content of this post. Log in or register now. to not use the index when searching in file folders for system files. Non index searches will take a bit longer to give search results. If you disable the index, then this will help your hard drive not run as much while the index (if enabled) automatically updates itself in the background when your computer is idle. If you disable the index, you will also no longer be able to search within libraries.
27. You do not have permission to view the full content of this post. Log in or register now.
While having your HDDs turn off after set x amount of idle minutes can help save energy, it can also cause your PC to pause while waiting for the HDD to spin back up when needed. You could either set this to never turn off the HDDs, or increase the amount of idle minutes before turning off the HDDs to avoid it being turned off while you may still need it and have to wait for it to spin back up as often.
28. Clean Your PC
Keeping the fans and inside of your computer clean and dust free can help prevent performance issues. Dust acts as an insulator, making it harder for your hardware to dissipate the buildup of heat. When this problem becomes significant enough for your computer to overheat, certain components such as your processor or graphics card may temporarily throttle back their clock speeds in order to prevent damage to your hardware.
29. Set You do not have permission to view the full content of this post. Log in or register now. of a Process
By default, Windows shares the processor time between all running processes based upon their priority level. If a process has a higher priority, it gets more processor time compared to a process having a lower priority.
You could set priority of an application or process to run with a Realtime, High, Above Normal, Normal, Below Normal, or Low processor priority level. You could have a task from an application or process finish faster by giving it a higher priority level, or by setting a non urgent task to a lower priority level to allow other tasks to have more priority.
30. You do not have permission to view the full content of this post. Log in or register now.
Internet Explorer has a limit for the amount of simultaneously downloads per website or server.
- Internet Explorer 7 and earlier versions limit the number of files that you can download at one time to two by default.
- Internet Explorer 8 and Internet Explorer 9 limit the number of files that you can download at one time to six by default.
- Internet Explorer 10 and Internet Explorer 11 limit the number of files that you can download at one time to eight by default.
In addition, if you visit a website with lots of images (and supporting files like CSS styles and Javascript), then you could have a slower browsing experience. On average, your browser could have to make several requests to the site's server before it can finish loading the page. Requesting all the files needed to download with the default 8 (ex: IE11) at a time is going to be slower than requesting say 16 files at a time.
As internet connection speeds increase, the default number of simultaneous downloads to a single website or server may be to restrictive and not meet your needs.
31. Run You do not have permission to view the full content of this post. Log in or register now. to Free Hard Drive Space
Running Disk Cleanup every so often will help find and remove unnecessary files on your hard disk to free up disk space and help your computer run faster.
32. You do not have permission to view the full content of this post. Log in or register now.
This will let you change how long to show notifications above the taskbar notification area before they automatically close.
33. You do not have permission to view the full content of this post. Log in or register now.
Windows 10 introduces a new battery saver feature that conserves your PC's battery by limiting background activity and adjusting hardware settings. Battery saver will turn on automatically if you like, but you can also turn it on manually. You can add or remove apps to an always allowed list to always run in the background, even when Batter Saver is on.
34. You do not have permission to view the full content of this post. Log in or register now.
The TRIM command is essential to maintain the performance of solid state drives (SSDs) at an optimal level over the lifetime of the drive. It is recommended to verify and make sure TRIM support is enabled.
35. You do not have permission to view the full content of this post. Log in or register now.
Checking your drives for errors every once in a while can help fix some performance issues. Drive errors can usually be caused by bad sectors, improper shutdowns, bad software, corruption, physical damage, etc...
36. You do not have permission to view the full content of this post. Log in or register now.
By default, Windows will run the items in your Startup folder (shell:startup) after about a 10 second delay at Windows startup when you sign-in to your account. This was done to help improve the performance of Windows startup. If you have a fast computer, then you may wish to disable this startup delay to have your startup items run as soon as you sign-in instead delayed.
