🔒 Closed My|view androidtv pasok

[PHC-FCinco]

Guys Pasok Kung sino may mga Tv na

My|View Android TV or MstarAndroidTV

Tv Model Name:32SX250 (32EX250F) " no reset button"

Board Type: Madison
BoardModel:CV628H_B42
Software Name CAIXUN-CV628H_B42
Firmware Name:CtvUpgrade.bin
RemoteKey Factory Menu :
TV Mustbe Completely OFF SET +, VOL+ ,VOL - ,CHA- ,CHA + ,POW
OR
TV Must be ON SOURCE+,2,5,8,0

<--------------------------------------->
ganito ang proceedure ng pag flash ng mga mstar

eto tutorial sa pag flash
flashing process
1st. unplug tv
2nd. insert usb fat32 with official ctvupgrade.bin in root folder
3rd. hold power while plugin to power outlet
the tv willbe flash in blue screen indicating the process of upgrading

ngaun official firmware nlng ang kulang

 

[PHC_EUZtaszKIDDEvilDEAThS]

up for this

 

[PHC-FCinco]

up

 

[lordendrake123]

Up!

 

[PHC-FCinco]

Shell in UART
USB to TTL (UART) Log

i manage to find how to get into shell using UART In VGA Port (See attach ment for log file)

RX in PIN 12
TX in PIN 15
Ground PIN 5 & 10

 

[PHC-FCinco]

backup whole partition
insert USB in port 1

UART_115200


AC_ON
AutoDQS0-[6789ABCDEF][89ABCDEF][789ABCDE][789ABCDE]-[0xAABA]
AutoDQS1-[6789ABCDEF][789ABCDEF][6789ABCDE][6789ABCDE]-[0xAABA]
BIST0-OK

BIST1-OK

_
U
Relocation Offset is: 00fda000
[AT][MB][start ub][324]

U-Boot 2011.06-svn (Mar 17 2015 - 16:32:53)

[35m[NOS] UtopiaInit[m
1st UTOPIARegisterToUtopia is done[35m[MBoot] Driver Register to Utopia[m
uboot held at [2e1ddf60~2f500000],size=013220a0
CPU  : Madison
Board: BD_MST064B_10AVXM_CTVHB42_MADISON
DRAM:  245 MiB
Now running in RAM - U-Boot at: 2e600000

eMMC: DDR 48MHz
eMMC 3.68 GB [75FFF8h]
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
 Get MAC from ethaddr env
MAC:  0xb8: 0x3d: 0x4e: 0x46:0x4a: 0xbe
msIR_Initialize
[AT][MBoot][Driver Init][601]
[1;32m--->current MBoot Version: [0m
[1;31m--> BM-2.1.14(Mar 17 2015 - 16:33:03)[0m
[1;31m-->board name: BD_MST064B_10AVXM_CTVHB42_MADISON[0m
[1;31m**** Check the MBoot verion before you send this board [0m
[1;31m**** The best way, the board name must match current mboot version [0m

USAGE example: project_id_set 0x0000

Changelist:    24543697
============= set bootargs ===============
Unknown command 'if_51OnRam_set' - try 'help'
Hit any key to stop autoboot:  0  0
<< MStar >>#
<< MStar >>#
<< MStar >># usb start 1
<< MStar >># mmc dd mmc2usb 1

 

[PHC-PAPAJEK23]

ako meron... is theres a way para maupgrade ang OS natin?

 

[ferozlatif2006]

How you make this adapter connected can you please send the pictures of
adapter + cables + vga how they are connected with each other