🔒 Closed Help! my laptop got black screen na.

Status
Not open for further replies.

princegm

Leecher
Habang nasa installation ako ng os sa formating na ng partition. pinormat ko na lahat ng partition tapos, create ako ulit ng partition tapos aksidenteng natanggal ko yung Bootable flashdrive sa laptop then inulitan ko sa first ng ng formating pero. pag naka set up na sa bios lahat then enter na sa FD eh black screen na susunod.
sana may makatulong sakin. thankyou po
 
Try to load default settings of your bios kuya.. then check if detected ba si internal hdd mo.. after that make your FD as your first bootable drive second is the hdd.. after that the laptop will restart with the new bios settings saved.. magdidisplay siya "Press any key to boot from removable drive" atay yun.. then magloload po ang mga required files for installation.. once nakapasok ka na sa set up... press SHIFT + f10... lalabas yung command prompt.. then type mo diskpart.

follow mo ito at itype mo sa commad prompt in sequential order po ito kuya ;)

1. list disk <====== (makiktia mo hdd and fd mo dito)
2. select disk <=======(be careful with the selection kailangan tama ang pag pili mo sa disk.. baka ma pili mo yung FD mo.. goodbye.. ;P)
3. clean
4. create primary partition <set the primary partition size)
5. select parition 1 <==== (just type mo lang ito)
6. active
7 format fs=fat32 quick
8 assign
9 exit.

then continue with set up and dun ka mag repartition ulit kuya ;).. feedback if working po sa iyo ;)
 
Try to load default settings of your bios kuya.. then check if detected ba si internal hdd mo.. after that make your FD as your first bootable drive second is the hdd.. after that the laptop will restart with the new bios settings saved.. magdidisplay siya "Press any key to boot from removable drive" atay yun.. then magloload po ang mga required files for installation.. once nakapasok ka na sa set up... press SHIFT + f10... lalabas yung command prompt.. then type mo diskpart.

follow mo ito at itype mo sa commad prompt in sequential order po ito kuya ;)

1. list disk <====== (makiktia mo hdd and fd mo dito)
2. select disk <=======(be careful with the selection kailangan tama ang pag pili mo sa disk.. baka ma pili mo yung FD mo.. goodbye.. ;P)
3. clean
4. create primary partition <set the primary partition size)
5. select parition 1 <==== (just type mo lang ito)
6. active
7 format fs=fat32 quick
8 assign
9 exit.

then continue with set up and dun ka mag repartition ulit kuya ;).. feedback if working po sa iyo ;)
ayaw po... dun po sa windows setup po maam.. may windows error ako. error 0x80070017?
triny ko yan sa command prompt dun nako sa step ng creating prartition. may error napo "Diskpart has ecountered an error: Data error (cyclic redundancy check). See the System even log for more information"
 
Status
Not open for further replies.

About this Thread

  • 15
    Replies
  • 1K
    Views
  • 6
    Participants
Last reply from:
princegm

Trending Topics

Online now

Members online
459
Guests online
1,313
Total visitors
1,772

Forum statistics

Threads
2,274,110
Posts
28,953,709
Members
1,235,077
Latest member
clix1
Back
Top